Panasonic SBPF-960-GC, SBVK-960-GC Service manual

T
Specification
ORDER NO. MD0707010CE
Speaker System
SB-PF960GC
SB-VK960GC
Colour
(K)... Black Type
ype 3 way, 3 speaker system (Bass reflex)
Speaker unit(s) Impedance High 3 Ω/ Low 6 Ω
1. Super woofer 20 cm Cone type
2. Woofer 12 cm Cone type
3. Tweeter 2.5 cm Titanium dome type
Input power (IEC) High 110 W* (Max)/Low 55 W (Max)
Output sound pressure 88 dB/W (1.0 m)
Frequencyrange 40 Hz to 29 kHz (-16 dB)
54 Hz to 28 kHz (-10 dB)
Dimensions (W x H x D) 250 mm x 429.5 mm x 298.5 mm
Mass 6.1 kg
Notes :
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum analyzer.
* Rating with low-cut filter equipped amplifier.
© 2007 Matsushita Electric Industrial Co. Ltd.. All rights reserved. Unauthorized copying and distribution is a violation of law.
SB-PF960GC
1 System Combination
1.1. System Breakdown
Note :
The tables below show the breakdown for speaker combinations used in main unit systems.
System SC-VK960GC-K Music center SA-VK960GC-K
Front speakers Surround speakers Center speaker Subwoofer
System SC-VK960EE-K Music center SA-VK960EE-K
Front speakers Surround speakers Center speaker Subwoofer
System SC-VK960GCSK Music center SA-VK960GCSK
Front speakers Surround speakers Center speaker Subwoofer
System SC-VK960GCTK Music center SA-VK960GCTK
Front speakers Surround speakers Center speaker Subwoofer
SB-PF960GC-K SB-PS960GC-K SB-PC960GC-K SB-WVK960GC-K
SB-PF960GC-K SB-PS960GC-K SB-PC960GC-K SB-WVK960GC-K
SB-PF960GC-K SB-PS960GC-K SB-PC960GC-K SB-WVK960GC-K
SB-PF960GC-K SB-PS960GC-K SB-PC960GC-K SB-WVK960GC-K
System SC-VK960GS-K Music center SA-VK960GS-K
Front speakers Surround speakers Center speaker Subwoofer
System SC-VK960GCPK Music center SA-VK960GCPK
Front speakers Surround speakers Center speaker Subwoofer
SB-PF960GC-K SB-PS960GC-K SB-PC960GC-K SB-WVK960GC-K
SB-PF960GC-K SB-PS960GC-K SB-PC960GC-K SB-WVK960GC-K
2
2 Assembling and Disassembling
“ATTENTION SERVICER”
Some chassis components may have sharp edges. Be careful when disassembling and servicing.
1. This section describes procedures for checking the operation and replacing the main components.
2. For reassembly after operation checks or replacement, reverse the respective procedures.
Special reassembly procedures are described only when required.
3. Select items from the following index when checks or replacement are required.
4. Refer to the Parts No. on the page of “Parts Locatio n and Replacement Parts List” (Section 5), if necessary.
Below is the list of disassembly sections
Disassembly of Front Panel
Disassembly of Dome tweeter (SP1)
Disassembly of Woofer 1 (SP2)
Disassembly of Woofer 2 (SP3)
Disassembly of Woofer 1 spacer
Disassembly of Woofer 2 spacer
SB-PF960GC
3
SB-PF960GC
2.1. Disassembly of Front panel
Step 1: Remove 4 screws.
Step 4: Upset the speaker unit as shown above.
Step 5: Insert a flathead screwdriver above the steel rule as
shown.
Step 2: Upset the speaker unit as shown above.
Step 3: Insert a steel rule into the grooves of front panel. Push
the steel rule foward as arrow shown.
Caution:
Do not exert strong force as it may damage the front panel.
Step 6: Apply light force along the sides of wooden cabinet to push up the front panel.
Caution:
Do not exert strong force as it may damage the front panel.
4
Step 7: Detach the black (+) and blue (-) wires.
Step 8: Remove front panel.
SB-PF960GC
2.2. Disassembly of Dome tweeter (SP1)
Step 1: Remove front panel.
Step 2: Remove 4 screws.
Step 3: Remove dome tweeter.
5
Loading...
+ 9 hidden pages