Panasonic SA-PM321, SB-PM3 Operating Instructions Manual

Operating Instructions

CD Stereo System

Model No. SC-PM321

RQTV0160-1P

As an ENERGY STAR® Partner, Panasonic has determined that this product meets the ENERGY STAR® guidelines for energy efﬁ ciency.

Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference.

Operations in these instructions are described using remote control, but you can do the operations with the main unit if the controls are the same.

Your unit may not look exactly as illustrated.

La guía rápida en español se encuentra en la página 18 - 23.

SUPPLIED ACCESSORIES

Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts. (As of July 2006)

To order accessories, refer to “Accessory Purchases” on page 16.

1 x Remote control

(N2QAYB000051)

1 x AM loop antenna

(N1DAAAA00001)

1 x AC power supply cord

(K2CB2CB00018)

1 x FM indoor antenna

(RSA0007-L)

2 x Remote control batteries

Español

Preparativos iniciales ............................ 18

Colocación de los altavoces ................ 18

Controles ................................................ 19

Discos ..................................................... 20

FM/AM Radio .......................................... 21

Radio satelital XM

................................ 22

Temporizador ......................................... 23

Table of contents

IMPORTANT SAFETY INSTRUCTIONS 3

Placement of speakers .......................... 3

Getting started ....................................... 4

Overview of controls ............................. 6

Discs ....................................................... 7

FM/AM Radio .......................................... 9

Satellite Radio ................................ 10

Timer ....................................................... 12

Sound adjustment ................................. 13

External unit ........................................... 13

Troubleshooting guide .......................... 14

Speciﬁ cations ........................................ 15

Limited Warranty ................................... 16

Product Service ..................................... 17

Maintenance ........................................... 17

Listening caution ................................... 17

RQTV0160

Dear customer

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully.

These operating instructions are applicable to the following system.

System

SC-PM321

Main unit SA-PM321

Speakers SB-PM3

The model number and serial number of this product can be found on either the back or the bottom of the unit. Please note them in the space provided below and keep for future reference.

MODEL NUMBER SERIAL NUMBER

User memo:

DATE OF PURCHASE

DEALER NAME

DEALER ADDRESS

TELEPHONE NUMBER

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

CAUTION!

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

CAUTION!

DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.

The socket outlet shall be installed near the equipment and easily accessible. The mains plug of the power supply cord shall remain readily operable. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from AC receptacle.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated

dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

FCC Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Responsible Party: Panasonic Corporation of North America One Panasonic Way Secaucus, NJ 07094 Telephone No.: 1-800-211-7262

RQTV0160

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference.

-If you see this symbol-

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.

Placement of speakers

Speakers are designed identically so that no left or right channel orientation is necessary.

Use only the supplied speakers.

The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and sound quality will be negatively affected.

Note

• Keep your speakers at least 10 mm (13/32˝) away from the system for proper ventilation.

• These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily inﬂ uenced by magnetism.

• You cannot take the front net off the speakers.

Caution

• Use the speakers only with the recommended system. Failure to do so can damage the ampliﬁ er and speakers, and can cause ﬁ re. Consult a qualiﬁ ed service person if damage occurs or if a sudden change in performance is apparent.

• Do not attach these speakers to walls or ceilings.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tipover.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

RQTV0160

Connect the XM Connect & Play antenna, or XM Mini-Tuner and Home Dock (includes home antenna). (sold separately)

Getting started

Step 1

- Making the connections

Connect the AC power supply cord only after all other connections have been made.

Connect the AC power supply cord.

The included AC power supply cord is for use with this unit only. Do not use it with other equipment.

Connect the speaker cables.

Connect the FM indoor antenna.

Tape the antenna to a wall or column, in a position with least amount of interference.

Connect the AM loop antenna.

Stand the antenna up on its base. Keep the loose antenna cord away from other wires and cords.

Red (ª)

Black (·)

Red (ª)

Black (·)

Incorrect connection can damage the unit.

AM loop antenna

Adhesive tape

FM indoor antenna

To prevent interference with wireless equipment, place the antenna away from other equipment that emits radio waves (such as radio equipment and microwave ovens). Refer to page 10 for optimizing the reception.

XM Connect & Play antenna, or XM Mini-Tuner and Home Dock (includes home antenna)

RQTV0160

Optional antenna connections

FM outdoor antenna AM outdoor antenna

FM outdoor antenna

(not included)

Ω coaxial cable

(not included)

AM loop antenna (included)

AM outdoor antenna (not included)

• Never use an outdoor antenna during a lightning storm.

• You can connect the FM outdoor antenna for better reception. Please consult your dealer for installation.

• Disconnect the FM indoor antenna if an FM outdoor antenna is installed.

• Connect the AM outdoor antenna without removing the AM loop antenna. Run 5 to 12 m (16 to 40 feet) of vinyl-covered wire horizontally along a window or other convenient location.

Step 2

- Inserting batteries into the remote control

■ Batteries

• Insert so the poles (+ and –) match those in the remote control.

• Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place.

• Do not use rechargeable type batteries.

• Do not heat or expose to ﬂ ame.

• Mishandling of batteries in the remote control can cause electrolyte leakage, which may cause a ﬁ re.

Do not:

• mix old and new batteries;

• use different types of batteries at the same time;

• take apart or short-circuit;

• attempt to recharge alkaline or manganese batteries;

• use batteries if their covering has been peeled off.

■ Use

Aim at the remote control sensor, avoiding obstacles, at a maximum range of 7

m (23 feet) directly in front of the unit.

Refer to page 6 for remote control signal sensor position.

Step 3

- DEMO function

When the unit is ﬁ rst plugged in, a demonstration of its functions may be shown on the display. If the demo setting is off, you can show a demonstration by selecting “DEMO ON”.

Press and hold [7, –DEMO].

The display changes each time the button is held down.

$%-//&& $%-//.

While in standby mode, select “DEMO OFF” to reduce power consumption.

(16-40 ft.)

RQTV0160

Overview of controls

Main unit

Refer to the numbers in parentheses for page reference.

Top of unit

6 Tuner/Band selection (9, 10, 11)

1 Standby/on switch (

/l, POWER)

(7, 12)

Press to switch the unit from on to

standby mode or vice versa. In standby

mode, the unit is still consuming a small

amount of power.

Disc tray

Headphone jack (PHONES)

Avoid listening for prolonged periods of time to prevent hearing damage. Plug type: Ø3.5

mm (1/8˝) stereo

(not included)

4 Bass/Treble selection (13)

5 Volume control

2 Disc play/pause (7, 8)

Disc tray open/close (7)

Disc skip/search, tune/preset channel selection, XM radio channel search/scan, time adjustment, bass/ treble adjustment

Remote control sensor

Stop/Demo (5, 7, 8)

AC supply indicator (AC IN)

This indicator lights when the unit is

connected to the AC power supply.

3 Music port selection (13)

Music port jack (13)

Display panel

Remote control

Buttons such as 1 function the same as the controls on the main unit.

Clock/Timer (12)

Play timer (12)

Numeric (7, 8, 9, 10)

Delete (8)

Disc skip/search, tune/preset channel selection, XM radio channel search/scan, time adjustment, bass/treble adjustment (7 to 13)

Muting

Auto off

Program (8, 9, 11)

Clear (8)

Play mode (7, 9, 11)

Repeat (8)

Enter (8, 11)

Surround (13)

Display (7, 11)

Dimmer

Sleep timer (12)

Preset EQ (13)

XM radio category selection

and scan, disc album

selection (7, 8, 11)

Stop (7, 8)

This function allows you to turn off the unit in disc mode only after left unused for 10 minutes.

The setting is maintained even if the unit is turned off.

Dims the display panel.

Mutes the sound.

• Press the button to activate.

• Press again to cancel.

RQTV0160

Numeric buttons

Basic play

CD MP3

Press [y] to turn the unit on.

Press [0] to open the disc tray and then load the disc. Press [0] again to close the tray.

Label must face upward

Disc tray

Press [CD 6] to start play.

Adjust the volume.

To Action

stop the disc Press [ 7 ]. pause play Press [CD 6]. Press again to

resume play.

skip tracks

Press

[ /4] or [ /¢].

search through tracks

Press and hold [ /4] or [ /¢] during play or pause.

skip album

MP3

Press [ALBUM or ] in the play mode. Press [ALBUM

or ] once and then the numeric buttons in the stop mode.

Play Mode function

CD MP3

Press [CD 6].

Press [PLAY MODE] to select the desired mode.

Mode To play

1-TRACK

1TR

one selected track on the disc. Press the numeric buttons to select the track.

1-ALBUM

1ALBUM

MP3

one selected album on the disc. Press [ALBUM

or ] to select the

album.

RANDOM

RND

a disc randomly.

1-ALBUM RANDOM

1ALBUM RND

MP3

all tracks in one selected album randomly. Press [ALBUM

or ] to select the

album.

Note

• During RANDOM or 1-ALBUM RANDOM play, you cannot skip to tracks that have been played.

• The current play mode is cleared when you change a disc or open the disc tray.

• During RANDOM play, you can search backward or forward only within the current track.

Display function

This function allows you to display the information of the current track.

Press [DISPLAY] repeatedly during play or pause mode.

Elapsed play time Remaining play time

MP3

Elapsed time Album name Track name

ID3 (Artist)

ID3 (Track) ID3 (Album)

Note

• Maximum number of displayable characters: approximately 30

• This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not supported will not be displayed.

• ID3 is a tag embedded in MP3 tracks to provide information about the track.

Discs

RQTV0160

Advanced play

Direct access play

This function allows you to start play from a speciﬁ c track.

Press the numeric buttons to select and play your desired track.

MP3

Press [ALBUM or ] to select the album.

Press [ /¢] once and then the numeric buttons to select and play your desired track.

For two-digit track, press [h10] once, and then the two digits. For three-digit track, press [h

10]

twice, and then the three digits.

Note

This function does not work during any random/program mode.

Repeat play

You can repeat program play or other selected play mode.

CD MP3

Press [REPEAT] before or during play.

“REPEAT ON” and “

” are displayed.

To cancel

Press [REPEAT] again.

“REPEAT OFF” is displayed and “

” is cleared.

Program play

This function allows you to program up to 24 tracks.

Press [CD 6] and then [ 7 ].

Press [PROGRAM].

Press the numeric buttons to select your desired track.

Repeat this step to program other tracks. Example:

Track number

Program number

Program indicator

Press [CD 6] to start play.

MP3

Press [CD 6] and then [ 7 ].

Press [PROGRAM].

Press [ALBUM or ] to select your desired album.

Press [ /¢] once and then the numeric buttons to select your desired track.

Example:

Album number

Track number

Press [ENTER].

Repeat steps 3 to 5 to program other tracks.

Press [CD 6] to start play.

To Action

cancel program mode

Press [PROGRAM] in the stop mode.

replay the program Press [PROGRAM] then [CD 6]. check program

contents

Press

[ /4] or [ /¢] when “PGM” is displayed in the stop mode.To check while programming, press [PROGRAM] twice after “PGM” appears, then press

[ /4]

or [ /¢] .

add to the program

Repeat step 3 in the stop mode.

MP3

Repeat steps 3 to 5 in the stop mode.

clear the last track Press [DEL] in the stop mode. clear all

programmed tracks

Press [CLEAR] in the stop mode. “CLR ALL” is displayed.

Note

• When you try to program more than 24 tracks “PGM FULL” appears.

• The program memory is cleared when you open the disc tray.

• During program play, you can search backward or forward only within the current track.

Note

• This unit can play MP3 ﬁ les and CD-DA format audio CD-R/RW that have been ﬁ nalized.

• It may not be able to play some CD-R/RW depending on the condition of the recording.

• Do not use irregularly shaped discs.

• Do not use discs with labels and stickers that are coming off or with adhesive exuding from under labels and stickers.

• Do not attach extra labels or stickers on the disc.

• Do not write anything on the disc.

• This unit can access up to 99 tracks.

• Choose a CD with this mark:

Using DualDiscs

The “CD” sides of DualDiscs do not meet the CD-DA standard so it may not be possible to play them on this unit.

MP3

• Files are treated as tracks and folders are treated as albums.

•

This unit can access up to 999 tracks, 255 albums and 20 sessions.

• Disc must conform to ISO9660 level 1 or 2 (except for extended formats).

• To play in a certain order, preﬁ x the folder and ﬁ le names with the 3-digit numbers in the order you want to play them.

Discs (continued)

+ 16 hidden pages

Panasonic SA-PM321, SB-PM3 Operating Instructions Manual

Specifications and Main Features

Frequently Asked Questions

User Manual