Panasonic SC-PM23, SA-PM23, SB-PM23 Operating Instructions Manual

Operating Instructions

CD Stereo System

Model No. SC-PM23

RQTV0080-1P

As an ENERGY STAR® Partner∗,
Panasonic has determined that this
product meets the ENERGY STAR®
guidelines for energy effi ciency.

∗

For Canada only: The word “Participant” is used in place
of the word “Partner”.

Before connecting, operating or adjusting this product, please
read the instructions completely.
Please keep this manual for future reference.

Operations in these instructions are described using remote
control, but you can do the operations with the main unit if the
controls are the same.

Your unit may not look exactly as illustrated.

La guía rápida en español se encuentra en la página 18 - 23.

Table of contents

IMPORTANT SAFETY

INSTRUCTIONS .............................. 3

Listening caution ................................ 3

Getting started .................................... 4

Placement of speakers ....................... 5

Overview of controls .......................... 6

Discs .................................................... 7

Cassette tape ...................................... 9

Radio .................................................... 10

Timer .................................................... 11

Sound adjustment .............................. 13

External unit ........................................ 13

Troubleshooting guide ....................... 14

Specifi cations ..................................... 15

Maintenance ........................................ 15

Limited Warranty

(ONLY FOR U.S.A.) ......................... 16

Limited Warranty

(ONLY FOR CANADA) .................... 17

Product Service .................................. 17

PPC

SUPPLIED ACCESSORIES

SUPPLIED ACCESSORIES

Please check and identify the supplied accessories.
Use numbers indicated in parentheses when asking for
replacement parts. (As of December 2005)

In the U.S.A. to order accessories, refer to “Accessory
Purchases” on page 16.

1 x Remote control

(N2QAYB000005)

1 x AM loop antenna

(N1DAAAA00001)

1 x AC power supply cord

(K2CB2CB00018)

1 x FM indoor antenna

(RSA0007-L)

2 x Remote control batteries

Español

Español

Preparativos iniciales ......................... 18

Colocación de los altavoces ............. 18

Controles ............................................. 19

Discos .................................................. 20

Cintas de casete ................................. 21

Radio .................................................... 22

Temporizador ...................................... 23

RQTV0080

2

Dear customer

Thank you for purchasing this product.
For optimum performance and safety, please read these
instructions carefully.

These operating instructions are applicable to the following
system.

System

SC-PM23

Main unit SA-PM23
Speakers SB-PM23

The model number and serial number of this product can
be found on either the back or the bottom of the unit.
Please note them in the space provided below and keep
for future reference.

MODEL NUMBER
SERIAL NUMBER

User memo:

DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS

TELEPHONE NUMBER

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PRODUCT DAMAGE, DO NOT
EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE PLACED ON
THE APPARATUS.

CAUTION!

THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.

CAUTION!

DO NOT INSTALL OR PLACE THIS UNIT IN
A BOOKCASE, BUILT-IN CABINET OR IN
ANOTHER CONFINED SPACE. ENSURE THE
UNIT IS WELL VENTILATED. TO PREVENT RISK
OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CURTAINS AND
ANY OTHER MATERIALS DO NOT OBSTRUCT
THE VENTILATION VENTS.

The socket outlet shall be installed near the equipment
and easily accessible or the mains plug or an appliance
coupler shall remain readily operable.

The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated

dangerous voltage within the product s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

FCC Note:

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and
receiver.

• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV
technician for help.

Any unauthorized changes or modifications to this
equipment would void the user’s authority to operate
this device.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.

Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Telephone No.: 1-800-211-7262

RQTV0080

3

ENGLISHEnglishEnglish

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the
applicable safety instructions listed below. Keep these operating instructions handy for future reference.

Listening caution

%34

Selecting fi ne audio equipment such as the unit you’ve
just purchased is only the start of your musical enjoyment.
Now it’s time to consider how you can maximize the fun
and excitement your equipment offers. This manufacturer
and the Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the
sound come through loud and clear without annoying blaring
or distortion—and, most importantly, without affecting your
sensitive hearing.

We recommend that you avoid prolonged exposure to
excessive noise.

Sound can be deceiving. Over time your hearing “comfort
level” adapts to higher volumes of sound. So what sounds
“normal” can actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level
BEFORE your hearing adapts.
To establish a safe level:

• Start your volume control at a low setting.

• Slowly increase the sound until you can hear it comfortably
and clearly, and without distortion.

Once you have established a comfortable sound level:

• Set the dial and leave it there.

Taking a minute to do this now will help to prevent hearing
damage or loss in the future. After all, we want you listening
for a lifetime.

-If you see this symbol­Information on Disposal in other Countries outside the

European Union

This symbol is only valid in the European Union.
If you wish to discard this product, please contact
your local authorities or dealer and ask for the
correct method of disposal.

Except for U.S.A.

Inside of product

10) Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the

manufacturer.

12) Use only with the cart, stand, tripod,

bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip­over.

13) Unplug this apparatus during lightning storms or when

unused for long periods of time.

14) Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.

RQTV0080

4

Getting started

Step

Step 11

- Making the connections

- Making the connections

Connect the AC power supply cord only after all other connections have been made.

Optional antenna connections

Optional antenna connections

FM outdoor antenna AM outdoor antenna

FM outdoor antenna
(not included)

75 Ω coaxial cable

(not included)

AM outdoor antenna
(not included)

AM loop antenna
(included)

(16-

40

ft.)

• Never use an outdoor antenna during a lightning storm.

• You can connect the FM outdoor antenna for better reception. Please consult your dealer for installation.

• Disconnect the FM indoor antenna if an FM outdoor antenna is installed.

• Connect the AM outdoor antenna without removing the AM loop antenna. Run 5 to 12 m (16 to 40 feet) of vinyl-covered wire
horizontally along a window or other convenient location.

4

Connect the AC power supply cord.

The included AC power supply cord is for use with this
unit only. Do not use it with other equipment.

3

Connect the speaker cords.

Incorrect connection can damage the unit.

2

Connect the FM indoor antenna.

Tape the antenna to a wall or column, in a
position with least amount of interference.

Adhesive
tape

FM indoor
antenna

FM A

NT

75

1

Connect the AM loop antenna.

Stand the antenna up on its base. Keep the loose antenna cord
away from other wires and cords.

Black (·)

Black (·)

Red (ª)

AM loop antenna

Red (ª)

RQTV0080

5

ENGLISHEnglishEnglish

Step 2

Step 2

- Inserting batteries into the remote control

- Inserting batteries into the remote control

■ Batteries

• Insert so the poles (+ and –) match those in the remote control.

• Remove if the remote control is not going to be used for a long period of
time. Store in a cool, dark place.

• Do not use rechargeable type batteries.

• Mishandling of batteries in the remote control can cause electrolyte
leakage, which may cause a fi re.

Do not:

• mix old and new batteries;

• use different types of batteries at the same time;

• heat or expose to fl ame;

• take apart or short-circuit;

• attempt to recharge alkaline or manganese batteries;

• use batteries if their covering has been peeled off.

■ Use

Aim at the remote control sensor, avoiding obstacles, at a maximum

range of 7

m (23 feet) directly in front of the unit.

Refer to page 6 for remote control signal sensor position.

S

Step 33

- DEMO function

- DEMO function

When the unit is fi rst plugged in, a demonstration of its functions may be
shown on the display.
If the demo setting is off, you can show a demonstration by selecting
“DEMO ON”.

Press and hold [7, -DEMO].

The display changes each time the button is held down.

$%-//&& $%-//.

While in standby mode, select “DEMO OFF” to reduce power
consumption.

Placement of speakers

Speakers are designed identically so that no left or right channel orientation is necessary.

Use only the supplied speakers.

The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and sound
quality will be negatively affected.

Note

• Keep your speakers at least 10 mm (13/32˝) away from the system for proper ventilation.

• These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily infl uenced
by magnetism.

• You cannot take the front net off the speakers.

Caution

• Use the speakers only with the recommended system. Failure to do so can damage the amplifi er and
speakers, and can cause fi re. Consult a qualifi ed service person if damage occurs or if a sudden
change in performance is apparent.

• Do not attach these speakers to walls or ceilings.

RQTV0080

6

Overview of controls

Main unit

Main unit

Refer to the numbers in parentheses for page reference.

Disc lid (7, 9)

Remote control sensor

Music port jack (13)

Stop/Demo (5, 7, 8, 9)

7 Tuner/Band selection (10)

Cassette lid (9)

Headphone jack (PHONES)

Avoid listening for prolonged
periods of time to prevent
hearing damage.
Plug type: 3.5

mm (1/

8

˝) stereo

(not included)

Disc lid open/close (7, 9)

Display panel

5 Volume control

Recording start/pause (9, 13)

2 Disc play/pause (7, 8)

3 Tape play (9)

Cassette lid open (9)

Disc skip/search, tape fast­forward/rewind, tune/preset
channel selection, time
adjustment, bass/treble
adjustment

6 Music port selection (13)

4 Bass/Treble selection (13)

Top of unit

AC supply indicator (AC IN)

This indicator lights when the unit is

connected to the AC power supply.

1 Standby/on switch (y/l, POWER) (7, 12)

Press to switch the unit from on to standby mode

or vice versa. In standby mode, the unit is still

consuming a small amount of power.

It takes a few seconds to turn on the unit after

connecting to the AC power supply.

Note:

Remote control

Remote control

Buttons such as 1 function the same as the controls on the main unit.

1

Clock/Timer (11, 12)

Play timer/Record timer (12)

Numeric (7, 8, 10)

Delete (8)

Stop (7, 8, 9)

Disc skip/search, tape fast­forward/rewind, tune/preset
channel selection, time
adjustment, bass/treble
adjustment (7 to 13)

Muting
Auto off

Program (8)

Clear (8)

Play mode (7)

Repeat (8)

7

Enter (8)

Surround (13)

Display (7)

Dimmer

Sleep timer (11)

4

Preset EQ (13)

5

2

Album selection (7, 8)

6

3

This function allows you to
turn off the unit in disc or
tape mode only after left
unused for 10 minutes.

The setting is maintained
even if the unit is turned
off.

Dims the display panel.

Mutes the sound.

• Press the button to activate.

• Press again to cancel.

RQTV0080

7

ENGLISHEnglishEnglish

Basic play

Basic play

CD MP3 WMA

1

Press [y] to turn the unit on.

2

Push [CD OPEN/CLOSE 0] to open the disc lid and
then insert the disc. Close the lid.

Disc lid

Label must face upward

3

Press [CD 6] to start play.

4

Adjust the volume.

To Action

stop the disc

Press [ 7 ].

pause play Press [CD 6]. Press again to

resume play.

skip tracks Press

[ /REW/4] or [ /FF/¢].

search through tracks

CD

Press and hold [ /REW/4] or
[

/FF/¢] during play or pause.

skip album

MP3 WMA

Press [ALBUM or ] in the play
mode.
Press [ALBUM

or ] once and
then the numeric buttons in the stop
mode.

Play Mode function

Play Mode function

CD MP3 WMA

1

Press [CD 6].

2

Press [PLAY MODE] to select the desired mode.

Mode To play

1-TRACK

1TR

one selected track on the disc.
Press the numeric buttons to select the
track.

1-ALBUM

1ALBUM

MP3 WMA

one selected album on the disc.
Press [ALBUM

or ] to select the

album.

RANDOM

RND

a disc randomly.

1-ALBUM RANDOM

1ALBUM RND

MP3 WMA

all tracks in one selected album randomly.
Press [ALBUM

or ] to select the

album.

Note

• During RANDOM or 1-ALBUM RANDOM play, you cannot skip to
tracks that have been played.

CD

• During RANDOM play, you can search backward or forward only
within the current track.

Display function

Display function

This function allows you to display the information of the
current track.

Press [DISPLAY] repeatedly during play or pause mode.

CD

Elapsed play time Remaining play time

MP3 WMA

Elapsed time Album name Track name

Tag (Artist)

Tag (Track) Tag (Album)

Note

• Maximum number of displayable characters: approximately 30

• This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not
supported will not be displayed.

• ID3 is a tag embedded in MP3 tracks to provide information about
the track.

Discs

Disc lid

CD OPEN/CLOSE 0

Numeric
buttons

Top of unit

RQTV0080

8

Advanced play

Advanced play

Direct access play

Direct access play

This function allows you to start play from a specifi c track.

CD

Press the numeric buttons to select and play your
desired track.

MP3 WMA

1

Press

[ALBUM or ]

to select the album.

2

Press [ /FF/¢] once and then the numeric
buttons to select and play your desired track.

For two-digit track, press [h10] once, and then the two digits.
For three-digit track, press [h

10]

twice, and then the three digits.

Note

This function does not work during any random/program mode.

Repeat play

Repeat play

You can repeat program play or other selected play mode.

CD MP3 WMA

Press [REPEAT] before or during play.

“REPEAT ON” and “ ” are displayed.

To cancel

Press [REPEAT] again.

“REPEAT OFF” is displayed and “

” is cleared.

Program play

Program play

This function allows you to program up to 24 tracks.

CD

1

Press [CD 6] and then [ 7 ].

2

Press [PROGRAM].

3

Press the numeric buttons to select your desired
track.

Repeat this step to program other tracks.
Example:

Track number

Program number

Program indicator

4

Press [CD 6] to start play.

MP3 WMA

1

Press [CD 6] and then [ 7 ].

2

Press [PROGRAM].

3

Press [ALBUM or ] to select your desired
album.

4

Press [ /FF/¢] once and then the numeric
buttons to select your desired track.

Example:

Album number

Track number

5

Press [ENTER] to store the program.

Repeat steps 3 to 5 to program other tracks.

6

Press [CD 6] to start play.

To Action

cancel program
mode

Press [PROGRAM] in the stop mode.

replay the program Press [PROGRAM] then [CD 6].

check program
contents

Press [ /REW/4] or [ /FF/¢] when
“PGM” is displayed in the stop mode.

To check while programming, press
[PROGRAM] twice after “PGM” appears,

then press

[ /REW/4] or [ /FF/¢].

add to the program

CD

Repeat step 3 in the stop mode.

MP3 WMA

Repeat steps 3 to 5 in the stop mode.

clear the last track Press [DEL] in the stop mode.

clear all
programmed tracks

Press [CLEAR] in the stop mode.
“CLR ALL” is displayed.

Note

• When you try to program more than 24 tracks, “PGM FULL”
appears.

• The program memory is cleared when you open the disc lid.

CD

During program play, you can search backward or forward only within
the current track.

Discs (continued)

Note

• This unit can play MP3 or WMA fi les and CD-DA format audio CD­R/RWs that have been fi nalized.

• It may not be able to play some CD-R/RWs, depending on the
condition of the recording.

• Do not use irregularly shaped discs.

• Do not use discs with labels and stickers that are coming off or with
adhesive exuding from under labels and stickers.

• Do not attach extra labels or stickers on the disc.

• Do not write anything on the disc.

CD

• This unit can access up to 99 tracks.

• Choose a CD with this mark:

Using DualDiscs

The “CD” sides of DualDiscs do not meet the CD-DA standard so it
may not be possible to play them on this unit.

MP3 WMA

• Files are treated as tracks and folders are treated as albums.

•

This unit can access up to 999 tracks, 255 albums and 20 sessions.

• Disc must conform to ISO9660 level 1 or 2 (except for extended
formats).

• To play in a certain order, prefi x the folder and fi le names with the
3-digit numbers in the order you want to play them.

MPEG Layer-3 audio decoding technology licensed from
Fraunhofer IIS and Thomson multimedia.

Windows Media, and the Windows
logo are trademarks, or registered
trademarks of Microsoft Corporation
in the United States and/or other
countries.

WMA is a compression format
developed by Microsoft Corporation.
It achieves the same sound quality
as MP3 with a fi le size that is smaller
than that of MP3.