Panasonic SA AK580 Diagram

PSG0905048CE

CD Stereo System

Model No. SA-AK580PH

SA-AK580PN

Product Color: (K)...Black Type

Notes: This model’s CD Mechanism Unit (CR14C). Please refer to the Original Service Manual (Order No. MD0805031CE) for this CD Mechanism Unit.

TABLE OF CONTENTS

PAGE PAGE

1 Safety Precautions----------------------------------------------- 4

1.1. General Guidelines---------------------------------------- 4

1.2. Before Use (For PH only)-------------------------------- 4

1.3. Caution For Fuse Replacement------------------------ 4

1.4. Before Repair and Adjustment------------------------- 5

1.5. Protection Circuitry ---------------------------------------- 5

1.6. Safety Parts Information----------------------------------5

2 Warning --------------------------------------------------------------7

2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatic Sensitive (ES) Devices---------------7

2.2. Precaution of Laser Diode -------------------------------8

2.3. Service caution based on Legal restrictions --------9

2.4. Handling Precautions for Traverse Unit ------------ 10

3 Service Navigation----------------------------------------------12

3.1. Service Information -------------------------------------- 12

4 Specifications ---------------------------------------------------- 13 5 Location of Controls and Components ------------------ 14

5.1. Main Unit Key Button Operation---------------------- 14

5.2. Remote Control Key Button Operation ------------- 15

5.3. Disc Information ------------------------------------------16

6 Self-Diagnosis and Special Mode Setting -------------- 17

6.1. Doctor Mode Summary Table -------------------------17

6.2. Doctor Mode Table--------------------------------------- 18

6.3. Service Mode Summary Table------------------------22

6.4. Service Mode Table-------------------------------------- 23

6.5. Reliability Test Mode (CD Mechanism Unit CR14C) ----------------------------------------------------- 25

6.6. Error Code Table Display ------------------------------ 26

7 Troubleshooting Guide---------------------------------------- 28

7.1. Jupiter USB------------------------------------------------ 28

7.2. Troubleshooting Guide----------------------------------29

7.3. Troubleshooting Guide for F61 and/or F76 -------- 31

8 Service Fixture & Tools ---------------------------------------36

8.1. Service Tools and Equipment ------------------------- 36

9 Disassembly and Assembly Instructions --------------- 37

9.1. Disassembly Flow Chart--------------------------------39

9.2. Main Components and P.C.B. Locations ----------- 40

9.3. Disassembly of Top Cabinet--------------------------- 41

9.4. Disassembly of CD Mechanism Unit (CR14C) --- 42

9.5. Disassembly of Rear Panel---------------------------- 43

9.6. Disassembly of Fan Unit -------------------------------45

9.7. Disassembly of Front Panel Assembly ------------- 46

9.8. Disassembly of Mic P.C.B. ----------------------------- 48

9.9. Disassembly of Panel P.C.B.-------------------------- 49

9.10. Disassembly of Dynamic Bass Knob & Dynamic Bass Button Unit----------------------------- 50

9.11. Disassembly of Memory P.C.B.-----------------------52

9.12. Disassembly of MPort/Headphone P.C.B. --------- 53

9.13. Disassembly of CD Servo P.C.B.--------------------- 54

9.14. Disassembly of D-Amp P.C.B. ------------------------ 55

9.15. Replacement of Audio Digital Amp IC (IC5400) ---------------------------------------------------- 57

9.16. Replacement of Audio Digital Amp IC (IC5000) ---------------------------------------------------- 58

9.17. Disassembly of Main P.C.B. --------------------------- 59

9.18. Disassembly of SMPS P.C.B. ------------------------- 60

9.19. Replacement of Switching Regulator IC (IC5701) ---------------------------------------------------- 61

9.20. Replacement of Rectifier Diode (D5702)----------- 62

9.21. Replacement of Regulator Diode (D5801)---------64

9.22. Replacement of Regulator Diode (D5802)---------65

9.23. Replacement of Regulator Diode (D5803)---------66

9.24. Disassembly of AC Inlet P.C.B.-----------------------67

9.25. Disassembly of Jupiter P.C.B.------------------------- 68

9.26. Disassembly of Voltage Selector P.C.B. (For PH only) ----------------------------------------------------69

9.27. Replacement of Traverse Unit Assembly ---------- 70

9.28. Disassembly of CD Lid----------------------------------72

10 Service Position ------------------------------------------------- 73

10.1. Checking and Repairing of Main P.C.B. ------------ 73

10.2. Checking and Repairing of Panel P.C.B., Mic P.C.B., Jupiter P.C.B. and MPort/Headphone P.C.B.-------------------------------------------------------- 73

10.3. Checking and Repairing of D-Amp P.C.B. --------- 74

10.4. Checking and Repairing of SMPS P.C.B. and AC Inlet P.C.B.-------------------------------------------- 75

11 Voltage & Waveform Chart ---------------------------------- 76

11.1. CD Servo P.C.B. ----------------------------------------- 76

11.2. Main P.C.B. (1/3)----------------------------------------- 77

11.3. Main P.C.B. (2/3)----------------------------------------- 78

11.4. Main P.C.B. (3/3)----------------------------------------- 79

11.5. Panel P.C.B.----------------------------------------------- 79

11.6. D-Amp P.C.B.--------------------------------------------- 80

11.7. Jupiter P.C.B. (1/2) -------------------------------------- 81

11.8. Jupiter P.C.B. (2/2) -------------------------------------- 82

11.9. Mic P.C.B.-------------------------------------------------- 83

11.10. SMPS P.C.B.---------------------------------------------- 83

11.11. Waveform Table (1/3)----------------------------------- 84

11.12. Waveform Table (2/3)----------------------------------- 85

11.13. Waveform Table (3/3)----------------------------------- 86

12 Illustration of ICs, Transistor and Diode---------------- 87 13 Block Diagram--------------------------------------------------- 88

13.1. CD Servo Block Diagram ------------------------------ 88

13.2. Jupiter Block Diagram ---------------------------------- 89

13.3. Main(1/2) Block Diagram ------------------------------ 90

13.4. Main(2/2) Block Diagram ------------------------------ 91

13.5. Panel / MPort/Headphone / Mic / Memory Block Diagram-------------------------------------------- 92

13.6. D-Amp Block Diagram---------------------------------- 93

13.7. SMPS / AC Inlet / Voltage Selector Block Diagram ---------------------------------------------------- 94

14 Wiring Connection Diagram -------------------------------- 95 15 Schematic Diagram Notes ----------------------------------- 96 16 Schematic Diagram -------------------------------------------- 97

16.1. CD Servo Circuit ----------------------------------------- 97

16.2. Main Circuit (1/6)----------------------------------------- 98

16.3. Main Circuit (2/6)----------------------------------------- 99

16.4. Main Circuit (3/6)----------------------------------------100

16.5. Main Circuit (4/6)----------------------------------------101

16.6. Main Circuit (5/6)----------------------------------------102

16.7. Main Circuit (6/6)----------------------------------------103

16.8. Panel Circuit (1/2) --------------------------------------104

16.9. Panel Circuit (2/2) --------------------------------------105

16.10. Memory / MPort/Headphone / Mic Circuit --------106

16.11. D-Amp Circuit (1/2)------------------------------------- 107

16.12. D-Amp Circuit (2/2)-------------------------------------108

16.13. Jupiter Circuit (1/4) -------------------------------------109

16.14. Jupiter Circuit (2/4) ------------------------------------- 110

16.15. Jupiter Circuit (3/4) ------------------------------------- 111

16.16. Jupiter Circuit (4/4) ------------------------------------- 112

16.17. SMPS Circuit (1/2)-------------------------------------- 113

16.18. SMPS Circuit (2/2)-------------------------------------- 114

16.19. AC Inlet / Voltage Selector Circuit ------------------ 115

17 Printed Circuit Board----------------------------------------- 116

17.1. CD Servo / Jupiter P.C.B.----------------------------- 116

17.2. Main P.C.B. ----------------------------------------------- 117

17.3. Panel / Memory / MPort/Headphone / Mic P.C.B. ------------------------------------------------------ 118

17.4. D-Amp P.C.B. -------------------------------------------- 119

17.5. SMPS / AC Inlet / Voltage Selector P.C.B. (For PH) --------------------------------------------------------- 120

17.6. SMPS/ AC Inlet P.C.B. (For PN) -------------------- 121

18 Terminal Function of ICs ------------------------------------ 122

18.1. IC2801 (RFKWMAK580PN): IC Microprocessor------------------------------------------ 122

18.2. IC6601(C0HBB0000057): IC FL Driver -----------124

19 Exploded View and Replacement Parts List --------- 125

19.1. Exploded View and Mechanical Replacement Parts List-------------------------------------------------- 125

19.2. Electrical Replacement Part List-------------------- 130

1 Safety Precautions

1.1. General Guidelines

1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit.

2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed.

3. After servicing, carry out the following leakage current checks to prevent the customer from being exposed to shock hazards.

1.1.1. Leakage Current Cold Check

1. Unplug the AC cord and connect a jumper between the two prongs on the plug.

2. Measure the resistance value, with an ohmmeter, between the jumpered AC plug and each exposed metallic cabinet part on the equipment such as screwheads, connectors, control shafts, etc. When the exposed metallic part has a return path to the chassis, the reading should be between 1MΩ and 5.2MΩ. When the exposed metal does not have a return path to the chassis, the reading must be

1.1.2. Leakage Current Hot Check

1. Plug the AC cord directly into the AC outlet. Do not use an isolation transformer for this check.

2. Connect a 1.5kΩ, 10 watts resistor, in parallel with a 0.15μF capacitors, between each exposed metallic part on the set and a good earth ground such as a water pipe, as shown in Figure 1.

3. Use an AC voltmeter, with 1000 ohms/volt or more sensitivity, to measure the potential across the resistor.

4. Check each exposed metallic part, and measure the voltage at each point.

5. Reverse the AC plug in the AC outlet and repeat each of the above measurements.

6. The potential at any point should not exceed 0.75 volts RMS. A leakage current tester (Simpson Model 229 or equivalent) may be used to make the hot checks, leakage current must not exceed 1/2 milliamp. In case a measurement is outside of the limits specified, there is a possibility of a shock hazard, and the equipment should be repaired and rechecked before it is returned to the customer.

Figure 1

1.2. Before Use (For PH only)

Be sure to disconnect the mains cord before adjusting the voltage selector. Use a minus(-) screwdriver to set the voltage selector (on the rear panel) to the voltage setting for the area in which the unit will be used. (If the power supply in your area is 110V ~ 127V or 220V ~ 240V, set to the “110V ~ 127V or 220V ~ 240V” position.) Note that this unit will be seriously damaged if this setting is not made correctly. (There is no voltage selector for some countries, the correct voltage is already set.)

1.3. Caution For Fuse Replacement

1.4. Before Repair and Adjustment

Disconnect AC power to discharge unit AC Capacitors as such (C5700, C5701, C5703, C5704, C5705, C5706, C5707) through a 10 Ω, 10 W resistor to ground.

Caution: DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy solid state devices.

After repairs are completed, restore power gradually using a variac, to avoid overcurrent. Current consumption at AC 110V~127V / 220V~240V, 50/60 Hz in NO SIGNAL mode volume minimal should be ~ 500 mA (For PH only). Current consumption at AC 120V, 60 Hz in NO SIGNAL mode volume minimal should be ~ 500 mA (For PN only).

1.5. Protection Circuitry

The protection circuitry may have operated if either of the following conditions are noticed:

• No sound is heard when the power is turned on.

• Sound stops during a performance. The function of this circuitry is to prevent circuitry damage if, for example, the positive and negative speaker connection wires are “shorted”, or if speaker systems with an impedance less than the indicated rated impedance of the amplifier are used. If this occurs, follow the procedure outlines below:

1. Turn off the power.

2. Determine the cause of the problem and correct it.

3. Turn on the power once again after one minute.

Note:

When the protection circuitry functions, the unit will not operate unless the power is first turned off and then on again.

1.6. Safety Parts Information

Safety Parts List:

There are special components used in this equipment which are important for safety.

These parts are marked by in the Schematic Diagrams & Replacement Parts List. It is essential that these critical parts should be replaced with manufacturer’s specified parts to prevent shock, fire or other hazards. Do not modify the original design without permission of manufacturer.

Table 1

Safety Ref. No. Part No. Part Name & Description Remarks

6 REXX0687-1 BLUE WIRE (VOLT SELECTOR -SMPS) PH

13 REZX0024-1 BLACK WIRE (AC INLET-SMPS) PH

13 REXX0684-1 BLACK WIRE (AC INLET-SMPS) PN

14 REXX0685-1 RED WIRE (AC INLET-SMPS) PN

14 REZX0023-1 RED WIRE (AC INLET-SMPS) PH

15 REXX0686-1 WHITE WIRE (VOLT SELECTOR-SMPS) PH

22 RGRX0070AAA2 REAR PANEL PH

22 RGRX0070Z-D1 REAR PANEL PN

41 RKMX0144A-K TOP CABINET

340 RAEX0190A-V TRAVERSE ASS’Y (RTL)

A2 K2CB2CB00021 AC CORD PN

A2 K2CQ2CA00007 AC CORD PH

A3 RQTX0265-1M O/I BOOK (En/Sp) PN

A3 RQTX0266-1M O/I BOOK (Sp) PH

PCB1 REPX0714J SMPS P.C.B. (RTL) PN

PCB1 REPX0714K SMPS P.C.B. (RTL) PH

PCB4 REPX0714J AC INLET P.C.B. (RTL) PN

PCB4 REPX0714K AC INLET P.C.B. (RTL) PH

PCB9 REPX0714K VOLTAGE SELECTOR P.C.B. (RTL) PH

DZ5701 ERZV10V511CS ZNR

S5701 K0ABCA000007 SW VOLTAGE SELECTOR PH

L5702 ELF22V035B LINE FILTER

T2900 G4D1A0000117 SWITCHING TRANSFORMER

T5701 ETS48AB116AC MAIN TRANSFORMER PH

T5701 ETS48AB12GAC MAIN TRANSFORMER PN

T5751 ETS19AB256AG SUB TRANSFORMER

PC5701 B3PBA0000402 PHOTO COUPLER

PC5702 B3PBA0000402 PHOTO COUPLER

PC5720 B3PBA0000402 PHOTO COUPLER

PC5799 B3PBA0000402 PHOTO COUPLER

F1 K5D802APA008 FUSE PN

F1 K5D802BNA005 FUSE PH

Safety Ref. No. Part No. Part Name & Description Remarks

FP2901 K5G4013A0001 FUSE PROTECTOR

TH5701 D4CAA5R10001 THERMISTOR PN

TH5702 D4CAA2R20001 THERMISTOR PH

TH5860 D4CC11040013 THERMISTOR

P5701 K2AA2B000017 AC INLET PH

P5701 K2AB2B000011 AC INLET PN

C5700 F1BAF1020020 1000pF

C5701 F0CAF334A087 0.33uF

C5703 F0C2H1040001 0.1uF 500V PH

C5703 F0CAF224A085 0.22uF PN

C5704 F1BAF1020020 1000pF

C5705 F1BAF1020020 1000pF

C5706 F1BAF1020020 1000pF PH

C5707 F1BAF1020020 1000pF PH

2 Warning

2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatic Sensitive

(ES) Devices

Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor "chip" components. The following techniques should be used to help reduce the incidence of component damage caused by electrostatic discharge (ESD).

1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any ESD on your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap, which should be removed for potential shock reasons prior to applying power to the unit under test.

2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly.

3. Use only a grounded-tip soldering iron to solder or unsolder ES devices.

4. Use only an anti-static solder removal device. Some solder removal devices not classified as “anti-static (ESD protected)” can generate electrical charge sufficient to damage ES devices.

5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices.

6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable conductive material).

7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material to the chassis or circuit assembly into which the device will be installed.

Caution:

Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.

8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD) suf-

ficient to damage an ES device).

2.2. Precaution of Laser Diode

Caution:

This product utilizes a laser diode with the unit turned “on”, invisible laser radiation is emitted from the pickup lens. Wavelength: 780 nm (CD) Maximum output radiation power from pickup: 100 μW/VDE Laser radiation from the pickup unit is safety level, but be sure the followings:

1. Do not disassemble the pickup unit, since radiation from exposed laser diode is dangerous.

2. Do not adjust the variable resistor on the pickup unit. It was already adjusted.

3. Do not look at the focus lens using optical instruments.

4. Recommend not to look at pickup lens for a long time.

2.3. Service caution based on Legal restrictions

2.3.1. General description about Lead Free Solder (PbF)

The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this equipment in considering the globally environmental conservation.

The normal solder is the alloy of tin (Sn) and lead (Pb). On the other hand, the lead free solder is the alloy mainly consists of tin (Sn), silver (Ag) and Copper (Cu), and the melting point of the lead free solder is higher approx.30 degrees C (86°F) more than that of the normal solder.

Definition of PCB Lead Free Solder being used

The letter of “PbF” is printed either foil side or components side on the PCB using the lead free solder.

(See right figure)

Service caution for repair work using Lead Free Solder (PbF)

• The lead free solder has to be used when repairing the equipment for which the lead free solder is used. (Definition: The letter of “PbF” is printed on the PCB using the lead free solder.)

• To put lead free solder, it should be well molten and mixed with the original lead free solder.

• Remove the remaining lead free solder on the PCB cleanly for soldering of the new IC.

• Since the melting point of the lead free solder is higher than that of the normal lead solder, it takes the longer time to melt the lead free solder.

• Use the soldering iron (more than 70W) equipped with the temperature control after setting the temperature at 350±30 degrees C (662±86°F).

Recommended Lead Free Solder (Service Parts Route.)

• The following 3 types of lead free solder are available through the service parts route. RFKZ03D01K-----------(0.3mm 100g Reel) RFKZ06D01K-----------(0.6mm 100g Reel) RFKZ10D01K-----------(1.0mm 100g Reel)

Note

* Ingredient: tin (Sn), 96.5%, silver (Ag) 3.0%, Copper (Cu) 0.5%, Cobalt (Co) / Germanium (Ge) 0.1 to 0.3%

2.4. Handling Precautions for Traverse Unit

The laser diode in the optical pickup unit may break down due to static electricity of clothes or human body. Special care must be taken avoid caution to electrostatic breakdown when servicing and handling the laser diode in the traverse unit.

2.4.1. Cautions to Be Taken in Handling the Optical Pickup Unit

The laser diode in the optical pickup unit may be damaged due to electrostatic discharge generating from clothes or human body. Special care must be taken avoid caution to electrostatic discharge damage when servicing the laser diode.

1. Do not give a considerable shock to the optical pickup unit as it has an extremely high-precise structure.

2. To prevent the laser diode from the electrostatic discharge damage, the flexible cable of the optical pickup unit removed should be short-circuited with a short pin or a clip.

3. The flexible cable may be cut off if an excessive force is applied to it. Use caution when handling the flexible cable.

4. The antistatic FPC is connected to the new optical pickup unit. After replacing the optical pickup unit and connecting the flexible cable, cut off the antistatic FPC.

2.4.2. Grounding for electrostatic breakdown prevention

Some devices such as the DVD player use the optical pickup (laser diode) and the optical pickup will be damaged by static electricity in the working environment. Proceed servicing works under the working environment where grounding works is completed.

2.4.2.1. Worktable grounding

1. Put a conductive material (sheet) or iron sheet on the area where the optical pickup is placed, and ground the sheet.

2.4.2.2. Human body grounding

1. Use the anti-static wrist strap to discharge the static electricity form your body.

3 Service Navigation

3.1. Service Information

This service manual contains technical information which will allow service personnel’s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers.

If the circuit is changed or modified, this information will be followed by supplement service manual to be filed with original service manual.

• CD Mechanism unit (CR14C):

1) This model uses CD Mechanism Unit (CR14C).

2) This service manual does not contain the following information on CD Mechanism Unit (CR14C)

- Schematic Diagram, Block Diagram and P.C.B. layout of CD Mechanism Unit (CR14C) P.C.B.

- Parts List for individual parts of CD Mechanism Unit (CR14C).

- Exploded View and Part List for individual parts of CD Mechanism Unit (CR14C). Please refer to original service manual (Order No. MD0805031CE)

• Micro-processor, EEPROM & FLASH ROM IC:

1) The following components are supplied as an assembled part.

- Micro-processor IC, IC2801 (RFKWMAK580PN)

- EEPROM IC, IC2200 (RFKWEAK580PN)

- FLASH ROM IC, IC701 (RFKWFAK580PN)

Before replacement of micro-processor IC, please check the version no. It may need matching with ROM correction.

• Speaker system:

1) The information, please refer to original service manual, SB-AK780PN/PNA-K & SB-WAK780PN-K (PSG0905028CE)

4 Specifications

Q AMPLIFIER SECTION RMS output power

Front Ch (both channels driven) 250 W per channel (6 Ω), 1 kHz, Total RMS stereo mode power 500 W PMPO Output Power For PN only 5500 W

Q FM/AM TUNER, TERMINALS SECTION Preset station FM 30 stations

AM 15 stations

Frequency Modulation (FM)

Frequency range For PH only 87.50 MHz to 108.00 MHz

(200 kHz step)

For PN only 87.9 MHz to 107.9 MHz

(200 kHz step)

87.5 MHz to 108.0 MHz (100 kHz step)

Antenna terminal(s) 75 Ω (unbalanced) Amplitude Modulation (AM)

Frequency range For PH only 522 KHz to 1629 kHz (9 kHz step)

520 KHz to 1630 kHz

(10 kHz step)

For PN only 520 KHz to 1710 kHz (10 kHz

step)

Aux input RCA pin jack Music Port (front) jack

Sensitivity 100 mV, 4.7 kΩ Terminal Stereo, 3.5 mm jack

Headphone jack

Terminal Stereo, 3.5 mm jack Output level (CD, 1kHz, -20dB) 32 Ω (Max)

Mic jack

Sensitivity 0.7 mV, 1.2 kΩ Terminal Mono, 3.5 mm jack (1 system)

Q DISC SECTION Disc played (8 cm or 12 cm)

(1) CD-Audio (CD-DA) (2) CD-R/RW (CD-DA, MP3* formatted disc) (3) MP3* * MPEG-1 Layer 3, MPEG-2 Layer 3

Pick up

Wavelength 795 nm(CD)

Audio output (Disc)

Number of channels 2 (FL, FR) FL = Front left channel FR = Front right channel SW = Subwoofer channel

Q USB SECTION USB port

USB standard USB 2.0 full speed Media file format support MP3 (*.mp3) USB device file system FAT 12, FAT 16, FAT 32 USB port power 500 mA (Max) Bit rate 16 kbps to 320 kbps (P.B)

USB recording

Recording file format MP3 (*.mp3) Bit rate 128 kbps / 192 kbps / 320 kbps USB recording speed 1x, max 4x (CD only)

Q General Power supply

For PH only AC 110 to 127/220 to 240 V,

50/60 Hz

For PN only AC 120 V, 60 Hz

Power consumption 112 W Dimensions (W x H x D) 250 mm x 331 mm x 326 mm Mass 4.6 kg Operating temperature range 0°C to +40°C Operating humidity range 35% to 80% RH (no condensation) Power consumption in standby mode For PH only 0.5 W (Approximate) For PN only 0.3 W (Approximate)

Notes :

1. Specifications are subject to change without notice. Mass and dimensions are approximate.

2. Total harmonic distortion is measured by the digital spectrum analyzer. Q System: SC-AK580PN-K Main Unit: SA-AK580PN-K

Front Speaker: SB-AK780PN-K

Q System: SC-AK580PH-K Main Unit: SA-AK580PH-K

Front Speaker: SB-AK780PN-K

5 Location of Controls and Components

5.1. Main Unit Key Button Operation

5.2. Remote Control Key Button Operation

TUNE MODE

This auto off function allows you to turn off the unit in di sc or USB mode on ly after lef t unused for 10 minutes.

• Press the button to a ctivate the fu nction.

• Press the button a gain to cancel.

• The setting is mai ntained even if t he unit is turned off.

Standby/on switch (

/l, POWER)

Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.

Track skip or search, check program content, preset channel selection, tuning function, time adjustment, timer operation, manual EQ setting

USB recording or pause

USB play or pause

Music port selection

AUX selection

Manual EQ selection

Disc play or pause

Tuner (FM/AM) selection

To d im t he d is pla y pa ne l.

• Press the button to a ctivate the fu nction.

• Press the button a gain to cancel.

D.BASS selection

Disc selection

Numeric selection

Delete function

Program function

Play mode function, Repeat function

RE-MASTER selection

Display function

CD to USB high-speed recording function

Clock or timer setting

Play timer or record timer setting

Sleep timer setting

To mute the sound.

• Press the button to a ctivate the fu nction.

• Press the button a gain or adjust th e volume to ca ncel.

Auto off function

Volume control

Muting function

Stop playback or program clear

Preset EQ selection

Dimmer function

Edit mode function

Recording mode selection

Album selection, Confirm selection

Tuning mode selection

5.3. Disc Information

6 Self-Diagnosis and Special Mode Setting

This unit is equipped with features od self-diagnosis & special mode setting for checking the function & reliability. Special Note: Checking of the reliability (ageing) & changer operation must be carry out to ensure good working condition in unit.

6.1. Doctor Mode Summary Table

Main unit buttons Remote control unit buttons Application Note

[]

Doctor Mode [DISPLAY] Cold Start

[PLAYMODE/-REPEAT] Volume 30 Setting Check

[4], [7] Doctor Mode (Refer to the section “6.2.1 Doctor Mode

[2] Micro-P Version Display [7] Volume 50 Setting Check (Refer to the section “6.2.2 Doctor Mode [8] Volume 35 Setting Check [9] Volume 0 Setting Check

[1] FL Display Check

[DEL] CD Open Test

[ ], [1], [1]

[ ], [1], [2]

[DISC] CR14 Changer Mechanism Check (Refer to the section “6.2.3 Doctor Mode

[ ], [9], [4]

[4] CD to USB Recording & Playing Inspection (Refer to the section “6.2.4 Doctor Mode

[FM/AM] Tuner Inspection

[OK] Exit Inspection Mode

CR14 Reliability Test 1 (no retry)

CR14 Reliability Test 2 (with retry)

CR14 Error Late Display

Table 1” for more information.)

Table 2” for more information.)

Table 3” for more information.)

Table 4” for more information.)

6.2. Doctor Mode Table

Below is the various special modes for checking:-

6.2.1. Doctor Mode Table 1

Item FL Display Key Operation

Mode Name Description Front Key

Doctor Mode To enter into Doctor

Mode.

Cold Start To activate cold start upon

next power up when reset is execute the next time.

In CD Mode:

1. Press [ ] button on main unit follow by [4] and [7] on remote control.

To exit Doctor Mode, press [OK] button on remote control.

In Doctor Mode:

1. Press [DISPLAY] button on remote control.

Micro-P Version Display

To check the firmware version for Jupiter & Microprocessor IC.

Display 1

Display 2

In Doctor Mode:

1. Press [2] button on remote control.

6.2.2. Doctor Mode Table 2

Item FL Display Key Operation

Mode Name Description Front Key

Volume Setting Check

To check for the volume setting of the main unit. The volume will be automatically set to its respective level (in dB). During this mode, treble/bass/EQ will be set to ‘0’dB & OFF.

Display 1 In Doctor Mode:

1. Press [7] button on remote control. To exit Doctor Mode, press [OK] button on main unit or remote control.

Display 1 In Doctor Mode:

2. Press [8] button on remote control. To exit Doctor Mode, press [OK] button on main unit or remote control.

FL Display Check To check the FL

CD OPEN Test To check the CD OPEN

CR14 Reliability Test1 (no retry)

CR14 Reliability Test2 (with retry)

segments display (All segments will light up)

operation.

Note:

1. If the mechanism error occurs, it should stop the test. (no retry, no recovery process).

2. The test mode is cleared by power OFF.

3. Reading and playback should not be done.

Note:

1. Even if the mechanism error occurs, it should retry as normal operation.

2. The test mode is cleared by power OFF.

3. Reading and playback should not be done.

Display 1 In Doctor Mode:

3. Press [9] button on remote control. To exit Doctor Mode, press [OK] button on main unit or remote control.

Display 1 In Doctor Mode:

4. Press [PLAY MODE/-REPEAT] button on remote control. To exit Doctor Mode, press [OK] button on main unit or remote control.

In Doctor Mode:

1. Press [1] button on remote control.

In Doctor Mode:

1. Press [DEL] button on remote control.

2. Press [OPEN/CLOSE] button on main unit to close the disc tray.

In Doctor Mode:

1. Press [ ], [1], [1] button on remote control.

In Doctor Mode:

1. Press [ ], [1], [2] button on remote control.

6.2.3. Doctor Mode Table 3

Item FL Display Key Operation

Mode Name Description Front Key

CR14 Inspection Below is the process:

1. Load TRAY 1 (Move to PLAY position)

2. After that, TRAY 2 is open (TRAY 1 still in LOAD condition) and close.

3. Next TRAY 3 is open (TRAY 1 still in LOAD condition) and close.

4. Then TRAY 4 is open (TRAY 1 still in LOAD condition) and close.

5. Finally TRAY 5 is open (TRAY 1 still in LOAD condition) and close.

6. Tray 1 is unloaded. (Move to the STOCK position)

7. Tray 1 is loaded. (Move to the PLAY position)

When step 1 to 7 operates normally without any error, FL will

display [CHGR_OK_] CR14 Error Code Display

To display errors codes for

CR14 changer mechanism.

Refer to section 6.4.1 (CD

Mechanism (CR14) Error code

table).

In Doctor Mode:

1. Press [DISC] button on remote control.

In Doctor Mode:

1. Press [ ], [9], [4] button on remote control.

6.2.4. Doctor Mode Table 4

Item FL Display Key Operation

Mode Name Description Front Key

CD to USB Recording & Playing Inspection

-Automatically change to CD

-Set it to VOL 0

-Preset EQ Set to FLAT USB Formatted

When high-speed recording

When analog recording

In Doctor Mode:

1. Press [4] button on remote control.

- Switches to the USB selector after an analog recording ends (TRACK 1 of ALBUM1) During playback this track

- Sets to VOL 50 (0dB) and start playback

- It is enabled to accept the SKIP key and the ALBUM key

Next, play the track analog recorded. (TRACK1 of ALBUM2) During playback this track

- It is enabled to accept the SKIP key and the ALBUM key

6.3. Service Mode Summary Table

Main unit buttons Remote control unit buttons Application Note

[]

Service Mode [1] Error Code History

[]

[2] Micro-P Version Display [5] USB Error Code History [6] CD Self Adjustment Result (Refer to the section “6.4.2 Service Mode [3] Cold Start

Service Mode (Refer to the section “6.4.1 Service Mode

Table 1” for more information.)

Table 2” for more information.)

6.4. Service Mode Table

6.4.1. Service Mode Table 1

Below is the various special modes for checking:-

Item FL Display Key Operation

Mode Name Description Front Key

Service Mode To enter into Service

Mode.

Error Code History Checking the records for

Error Code.

In CD Mode:

Press and hold [ ] button on main unit

for 2 seconds follow by [ ] on remote control for 2 seconds.

To exit, press [ON/OFF ] button on main unit or remote control. In Service Mode:

1. Press [1] button on remote control. To clear history, press & hold [0] for 5 seconds or more.

Micro-P Version Display

To Check for following:

1) System Version.

2) Jupiter Micro-processor version.

3) Micro-processor Version

In Service Mode:

1. Press [2] button on remote control.

(Display 1)

(Display 2)

USB Error Code History

To check for USB error codes.

In Service Mode:

1. Press [5] button on remote control. To clear history, press & hold [0] for 5 seconds or more.

6.4.2. Service Mode Table 2

Item FL Display Key Operation

Mode Name Description Front Key

CD Self Adjustment Result

To check for CD operation (self-adjusment).

In Service Mode:

1. Press [6] button on remote control.

Cold Start To reset to default setting. In Service Mode:

1. Press [3] button on remote control.

6.5. Reliability Test Mode (CD Mechanism Unit CR14C)

Below is the progress flow chart of ageing for the Mechanism unit (CR14C).

㪈㩷㫇㫃㪸㫐

㸣

㫌㫅㫃㫆㪸㪻

㸣㸣㸣㸣㸣

㪈㩷㫆㫇㪼㫅㪈㩷㫆㫇㪼㫅㪈㩷㫆㫇㪼㫅㪈㩷㫇㫃㪸㫐㪈㩷㫆㫇㪼㫅

㸣㸣㸣㸣㸣

㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪚㫆㫌㫅㫋㩷㫌㫇㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋

㸣㸣㸣㸣㸣

㪺㫃㫆㫊㪼㪺㫃㫆㫊㪼㪺㫃㫆㫊㪼㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪺㫃㫆㫊㪼

㸣㸣㸣㸣㸣

㪈㩷㫇㫃㪸㫐㪈㩷㫇㫃㪸㫐㪈㩷㫇㫃㪸㫐㪈㩷㫇㫃㪸㫐㩷㫆㫇㪼㫅㪈㩷㫇㫃㪸㫐

㸣㸣㸣㸣㸣

㪚㫆㫌㫅㫋㩷㫌㫇㪚㫆㫌㫅㫋㩷㫌㫇㪚㫆㫌㫅㫋㩷㫌㫇㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪚㫆㫌㫅㫋㩷㫌㫇

㸣㸣㸣㸣㸣

㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪺㫃㫆㫊㪼㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋

㸣㸣㸣㸣㸣

㫌㫅㫃㫆㪸㪻㫌㫅㫃㫆㪸㪻㫌㫅㫃㫆㪸㪻㫌㫅㫃㫆㪸㪻㫌㫅㫃㫆㪸㪻

㸣㸣㸣㸣㸣

㪌㩷㫇㫃㪸㫐㪌㩷㫇㫃㪸㫐㪌㩷㫇㫃㪸㫐㪌㩷㫇㫃㪸㫐㪌㩷㫇㫃㪸㫐

㸣㸣㸣㸣㸣

㪚㫆㫌㫅㫋㩷㫌㫇㪚㫆㫌㫅㫋㩷㫌㫇㪚㫆㫌㫅㫋㩷㫌㫇㪚㫆㫌㫅㫋㩷㫌㫇㪚㫆㫌㫅㫋㩷㫌㫇

㸣㸣㸣㸣㸣

㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋

㸣㸣㸣㸣㸣

㫌㫅㫃㫆㪸㪻㫌㫅㫃㫆㪸㪻㫌㫅㫃㫆㪸㪻㫌㫅㫃㫆㪸㪻㪌㩷㫇㫃㪸㫐㩷㫆㫇㪼㫅

㸣㸣㸣㸣㸣

㪌㩷㫆㫇㪼㫅㪌㩷㫆㫇㪼㫅㪌㩷㫆㫇㪼㫅㪌㩷㫆㫇㪼㫅㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋

㸣㸣㸣㸣㸣

㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪺㫃㫆㫊㪼

㸣㸣㸣㸣㸣

㪺㫃㫆㫊㪼㪺㫃㫆㫊㪼㪺㫃㫆㫊㪼㪺㫃㫆㫊㪼㫌㫅㫃㫆㪸㪻

㸣㸣㸣㸣㸣

㪊㩷㫇㫃㪸㫐㪊㩷㫆㫇㪼㫅㪊㩷㫆㫇㪼㫅㪊㩷㫆㫇㪼㫅㪊㩷㫆㫇㪼㫅

㸣㸣㸣㸣㸣

㪚㫆㫌㫅㫋㩷㫌㫇㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋

㸣㸣㸣㸣㸣

㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪺㫃㫆㫊㪼㪺㫃㫆㫊㪼㪺㫃㫆㫊㪼㪺㫃㫆㫊㪼

㸣㸣㸣㸣㸣

㪊㩷㫇㫃㪸㫐㩷㫆㫇㪼㫅㪊㩷㫇㫃㪸㫐㪊㩷㫇㫃㪸㫐㪊㩷㫇㫃㪸㫐㪊㩷㫇㫃㪸㫐

㸣㸣㸣㸣㸣

㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪚㫆㫌㫅㫋㩷㫌㫇㪚㫆㫌㫅㫋㩷㫌㫇㪚㫆㫌㫅㫋㩷㫌㫇㪚㫆㫌㫅㫋㩷㫌㫇

㸣㸣㸣㸣㸣

㪺㫃㫆㫊㪼㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋

㸣㸣㸣㸣㸣

㫌㫅㫃㫆㪸㪻㫌㫅㫃㫆㪸㪻㫌㫅㫃㫆㪸㪻㫌㫅㫃㫆㪸㪻㫌㫅㫃㫆㪸㪻

㸣㸣㸣㸣㸣

㪋㩷㫆㫇㪼㫅㪋㩷㫇㫃㪸㫐㪋㩷㫆㫇㪼㫅㪋㩷㫆㫇㪼㫅㪋㩷㫆㫇㪼㫅

㸣㸣㸣㸣㸣

㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪚㫆㫌㫅㫋㩷㫌㫇㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋

㸣㸣㸣㸣㸣

㪺㫃㫆㫊㪼㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪺㫃㫆㫊㪼㪺㫃㫆㫊㪼㪺㫃㫆㫊㪼

㸣㸣㸣㸣㸣

㪋㩷㫇㫃㪸㫐㪋㩷㫇㫃㪸㫐㩷㫆㫇㪼㫅㪋㩷㫇㫃㪸㫐㪋㩷㫇㫃㪸㫐㪋㩷㫇㫃㪸㫐

㸣㸣㸣㸣㸣

㪚㫆㫌㫅㫋㩷㫌㫇㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪚㫆㫌㫅㫋㩷㫌㫇㪚㫆㫌㫅㫋㩷㫌㫇㪚㫆㫌㫅㫋㩷㫌㫇

㸣㸣㸣㸣㸣

㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪺㫃㫆㫊㪼㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋

㸣㸣㸣㸣㸣

㫌㫅㫃㫆㪸㪻㫌㫅㫃㫆㪸㪻㫌㫅㫃㫆㪸㪻㫌㫅㫃㫆㪸㪻㫌㫅㫃㫆㪸㪻

㸣㸣㸣㸣㸣

㪉㩷㫇㫃㪸㫐㪉㩷㫇㫃㪸㫐㪉㩷㫇㫃㪸㫐㪉㩷㫇㫃㪸㫐㪉㩷㫇㫃㪸㫐

㸣㸣㸣㸣㸣

㪚㫆㫌㫅㫋㩷㫌㫇㪚㫆㫌㫅㫋㩷㫌㫇㪚㫆㫌㫅㫋㩷㫌㫇㪚㫆㫌㫅㫋㩷㫌㫇㪚㫆㫌㫅㫋㩷㫌㫇

㸣㸣㸣㸣㸣

㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋

㸣㸣㸣㸣㸣

㫌㫅㫃㫆㪸㪻㫌㫅㫃㫆㪸㪻㪉㩷㫇㫃㪸㫐㩷㫆㫇㪼㫅㫌㫅㫃㫆㪸㪻㫌㫅㫃㫆㪸㪻

㸣㸣㸣㸣㸣

㪉㩷㫆㫇㪼㫅㪉㩷㫆㫇㪼㫅㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪉㩷㫆㫇㪼㫅㪉㩷㫆㫇㪼㫅

㸣㸣㸣㸣㸣

㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪺㫃㫆㫊㪼㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋㪌㪇㪇㫄㫊㩷㪮㪸㫀㫋

㸣㸣㸣㸣㸣

㪺㫃㫆㫊㪼㪺㫃㫆㫊㪼㫌㫅㫃㫆㪸㪻㪺㫃㫆㫊㪼㪺㫃㫆㫊㪼

㸣㸣㸣㸣㸣

6.6. Error Code Table Display

Self-Diagnosis Function (refer Section “6.4.1” Service Mode Table 1”) provides information on any problems occurring for the unit and its respective components by displaying the error codes. These error code such as U**, H** and F** are stored in memory and held unless it is cleared. The error code is automatically display after entering into self-diagnostic mode.

6.6.1. CD Mechanism Unit (CR14C) Error Code Table

6.6.2. Error Code Table (For Power Supply)

7 Troubleshooting Guide

7.1. Jupiter USB

7.2. Troubleshooting Guide

+ 110 hidden pages