Panasonic RV10C-M KXF-6Q3C, RV10C, RV10C-L KXF-6Q3C Operating Instructions Manual
Turn Over Unit RV10C
Operating Instructions
Model No.
KXF-6Q3C
Thank you for purchasing RV10C, the turn over unit.
Before placing the machine in service, be sure to read the instruction manual for
proper usage.
After that, store it carefully and it if necessary.
WARNING
DO NOT ALLOW ANY PERSON WHO HAS NOT RECEIVED SPECIAL
TRAINING TO OPERATE THE MACHINE.
The machine may be operated improperly and injure you.
Either carry out training by yourself, or consult the manufacturer.
M11E
6Q3C-E-OMA00-C01-00
Page 3
DESCRIPTION OF MANUAL CONTENTS
DESCRIPTION OF MANUAL CONTENTS
This specifications consist of the following some contents. Please use it according to your work.
Operating Instructions
Part 1. Operating manual
This is the manual for the machine operators, and describes about
operating procedure, cautions and information which is necessary
for operation.
Part 2. Maintenance manual
This is the manual for the machine maintenance, and describes
about daily check, adjustment and exchange of consumers. Also,
the troubleshooting is included.
Part 3. Parts List
Parts constructions of each unit is indicated individually by the
exploded view.
Use this for parts order or confirmation of parts construction.
Page 4
6Q3C-E-OMA00-C01-00
Part 1 Operating Manual
Part 1 Operating Manual
SAFETY PRECAUTIONS
FUNCTIONS
GENERAL
DESCRIPTION
SPECIFICATION
MAJOR COMPONENTS
BASIC OPERATION
DAILY OPERATION
OPERATION
CHANGING MACHINE SET UP
Refer to the following pages for detailed contents.
1
2
3
4
5
6
6Q3C-E-OMA00-C02-01
Doc No.
6Q3C-E-OMAC-0001
Page 1
CONTENTS
CONTENTS
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS.................................5
GENERAL DESCRIPTION
1 FUNCTIONS
1-1 Operation Process Flow Chart................................................................1-1
2 SPECIFICATION
2-1 Specifications of Machine .......................................................................2-1
2-1-1 Outline Specifications .............................................................................2-1
2-1-2 Outer Dimension.....................................................................................2-2
2-1-3 Specifications of Board ...........................................................................2-3
3 MAJOR COMPONENTS
3-1 Visual Diagram .......................................................................................3-1
3-2 About Main Units ....................................................................................3-2
3-3 Patrol-light...............................................................................................3-3
Page 2
6Q4C-E-OMA00-B03-00
4 BASIC OPERATION
4-1 Operation Switch Panel ..........................................................................4-1
4-1-1 Diagram of Operation Panel ...................................................................4-1
4-1-2 Turn Over Unit, Contents of Switch Lamp ..............................................4-2
CONTENTS
6Q4C-E-OMA00-B03-01
Page 3
CONTENTS
OPERATION
5 DAILY OPERATION
5-1 Preparation of Operation ........................................................................5-1
5-2 Select Operation Mode ...........................................................................5-1
5-3 Operation Starting Condition ..................................................................5-1
5-4 Operation Process Flow Chart................................................................5-2
6 CHANGING MACHINE SET UP
6-1 Process of Change .................................................................................6-1
Page 4
6Q4C-E-OMA00-B03-00
SAFETY PRECAUTIONS
The precautions that must be observed in order to prevent injury to the user or another
person, or damage to property, are as follows.
The degree of danger or injury resulting from incorrect use due to failure to read an
indication is classified and described as follows.
This indication refers to a situation which is
DANGER
WARNING
CAUTION
The matters should be observed are classified and described according to the
symbols shown below.
(The following is only some examples of the symbolic indications.)
considered that there is imminent danger of death or
serious injury.
This indication refers to a situation which is
considered that there is a possibility of death or
serious injury.
This indication refers to a situation which is considÂered that there is a possibility of only injury or physical
damage.
Be sure to observe
These symbols indicate matters to which attention
must be paid.
This symbol indicates an action that must not be
carried out.
This symbol indicates an action that must be carried
out.
6Q4C-E-OMA00-B04-02
Page 5
SAFETY PRECAUTIONS
g
Be sure to observe
WARNING
Follow the warning indication.
This is a label for ensuring the safe machine use. If you do not observe it, there is a risk of
human injury or damage to property.
The following warning labels are pasted on this machine. Follow the instructions on each label. If a label
has come off, put a new one on a proper position. To order a label from the manufacturer, refer to
PARTS LIST.
feeder tables will have
serious injury.
0 1 J Q B
Front view of warning label attached positions
Label part No.
DANGER
DO NOT OPEN
THE COVER
WHEN
OPERATING
You will have serious
injury if you touch the
active part inside.
0 1 K 1 B
WARNING
HIGH VOLTAGE
You will have serious
electric shock if you
touch electric power
supply inside.
0 1 N G B
6Q4C-TI001
M32E
Page 6
6Q4C-E-OMA00-B04-01
WARNING
EMERGENCY STOP
R
S
E
T
E
R
S
E
T
E
If you sense any danger or abnormality, press an emergency stop
button to stop the machine.
If you continue to operate the machine in a dangerous or abnormal state, a breakdown or an
accident will occur.
There is one emergency stop button. Pressing it stops operation. Remove the cause of the danger or
abnormality, then re-start the machine. To reset the emergency stop button, turn it clockwise.
6Q4C-TI002
M33E-1B
6Q4C-E-OMA00-B04-01
1 Front operation panel
EMERGENCY STOP
R
E
S
E
T
T
E
S
E
R
Page 7
SAFETY PRECAUTIONS
Be sure to observe
WARNING
Observe the following items before placing your hand or other part of
your body in an active part of the machine in order to feed production
material, change machine set-up, or adjust machine settings.
You may be injured if the machine is actuated. Also you may be struck by an electric shock.
There are tow levels of procedure, shown below, for each kind of work.
1 Cutting off the power supply of the machine ---------- For repairing the control box.
2 Main power OFF ----------------------------------------------For replacing a control part such as a sensor,
or for disassembling or replacing parts.
6Q4C-TI002
1
The breaker to which
the machine is conÂnected.
M73EB
Page 8
2
Turn it off.
Turn it off.
6Q4C-E-OMA00-B04-01
Loading...