LCD Projector
PT-VMZ60
Specifications
Main unit
Power supply |
|
AC 100V - 240V, (4.3A-1.9A) 50Hz/60Hz |
|
|
Power consumption |
|
420W |
|
|
|
|
NORMAL: 420W ECO: 345W SHUTTER: 71W |
||
|
|
STANDBY MODE [ECO]*1: 0.4W STANDBY MODE [NORMAL]: 18W |
||
|
|
[STANDBY MODE] is set to [NORMAL]: [AUDIO SETTING] → [IN STANDBY MODE] |
||
|
|
is set to [ON]: 45W |
|
|
|
|
|
|
|
BTU value |
|
Max 1434BTU |
|
|
|
|
|
|
|
LCD panel |
Panel size |
16.3 mm (0.64 in) diagonal (16:10 aspect ratio) |
||
|
Projection system |
Transparent LCD panel (× 3, R/G/B)system |
|
|
|
Pixels |
2,304,000 (1920 × 1200) |
|
|
|
|
|
|
|
Light source |
|
Laser Diode |
|
|
|
|
|
|
|
Light output |
|
6000 lm (When [LIGHT POWER] is set to [NORMAL])*2 |
||
|
|
([INPUT SIGNAL] is set to [PC], [PICTURE MODE] is set to [DYNAMIC], |
||
|
|
[DAYLIGHT VIEW] is set to [OFF], |
|
|
|
|
[AUTO POWER SAVE] is set to OFF] |
|
|
|
|
4000 lm (When [LIGHT POWER] is set to [ECO][QUIET])*3 |
||
Time until light output declines to 50 %*4 |
20,000 hours |
|
|
|
Filter Replacement Cycle*5 |
20,000 hours (Under the dust conditions of |
0.08mg/ ) |
|
|
|
|
10,000 hours (Under the dust conditions of |
0.15mg/ ) |
|
|
|
Filter can be washed and reused up to two times. |
||
|
|
|
|
|
Resolution |
|
1920 × 1200 pixels |
|
|
|
|
(Input signals that exceed this resolution will be converted to 1920 x 1200 pixels.) |
||
|
|
|
|
|
Contrast ratio*2 |
|
3,000,000:1 (All White/All Black) (When [PICTURE MODE] is set to [DYNAMIC], |
||
|
|
[DYNAMIC CONTRAST] is set to [1]) |
|
|
|
|
|
|
|
Screen size |
|
0.76–7.62 m (30– 300 inches) (16:10 aspect ratio) |
||
|
|
|
|
|
Center to corner zone ratio*2 |
85% |
|
|
|
Lens |
|
1.6x Manual zoom (Throw ratio:1.09-1.77:1) / Manual focus lens, |
||
|
|
F=1.6–2.12, f=15.30–24.64 mm |
|
|
|
|
|
|
|
Compatible signal |
VIDEO |
fH: 15.73 kHz / 15.63 kHz fV: 59.94 Hz / 50 Hz |
||
|
RGB |
Resolution: 640 × 400 to 1920 × 1200 |
|
|
|
|
Dot clock frequency: 162 MHz or less |
|
|
|
|
PIAS (Panasonic Intelligent Auto Scanning) system |
||
|
YPBPR (YCBCR) |
Resolution: 480i/576i to 1920 × 1080 |
|
|
|
|
Dot clock frequency: 148.5 MHz or less |
|
|
|
|
The HD/SYNC and VD terminals do not support 3 value SYNC. |
||
|
HDMI |
Moving image signal resolution: 480i*6/576i*6 to 4096 x 2160 |
||
|
|
Still image signal resolution: 640 × 400 to 1920 × 1200 (non-interlace) |
||
|
|
Dot clock frequency: 25 MHz to 297 MHz |
|
|
|
DIGITAL LINK |
Moving image signal resolution: 480i*6/576i*6 to 4096 x 2160 |
||
|
|
Still image signal resolution: 640 x 400 to 1920 x 1200 (non-interlace) |
||
|
|
Dot clock frequency: 25 MHz to 297 MHz |
|
|
As of June 2019 |
1 / 1 0 |
VMZ60G_STI_01_01/06/2019
LCD Projector
PT-VMZ60
Keystone correction range
[VERTICAL KEYSTONE] (viewed from the side) |
[HORIZONTAL KEYSTONE] (viewed from above) |
Screen |
Screen |
Vertical arc correction (viewed from the side) |
Horizontal arc correction (viewed from above) |
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Projection distance |
|
|
|
Projection distance |
|||||
|
|
|
|
Arc radius |
|
|
|
Arc radius |
|||||
|
Screen |
|
|
|
Screen |
|
|||||||
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Arc center |
Arc center |
Screen |
Screen |
Projection distance |
Projection distance |
Arc radius |
Arc radius |
|
Only [KEYSTONE] used |
[KEYSTONE] and [CURVED] used together |
Only [CURVED] used |
|||||
Model No. |
Vertical |
Horizontal |
Vertical |
Horizontal |
|
|
|
|
keystone |
keystone |
keystone |
keystone |
Min. value |
Min. value |
Min. value |
Min. value |
|
|
correction |
correction |
correction |
correction |
of R2/L2 |
of R3/L3 |
of R2/L2 |
of R3/L3 |
|
angle α (°) |
angle β (°) |
angle α (°) |
angle β (°) |
|
|
|
|
PT-VMZ60 |
±25 |
±35 |
±25 |
±35 |
1.4 |
2.9 |
0.7 |
1.6 |
When [SCREEN ADJUSTMENT] is used, the focus may not be able to match the whole screen as correction increases.
The curved screen should be in the shape of a circular arc part of a perfect circle.
Optical axis shift |
Vertical: +44%, 0% (manual) |
|
Horizontal: +20%, -20% (manual) |
Installation |
Ceiling/ oor, front/rear |
Terminals |
COMPUTER 1 IN |
COMPUTER 2 IN / 1 OUT
VIDEO IN
HDMI 1 IN
HDMI 2 IN
AUDIO IN 1
AUDIO IN 2
AUDIO IN 3
VARIABLE AUDIO OUT
USB [VIEWER/WIRELESS/DC OUT]
SERIAL IN
high-density D-Sub 15 p (female) + 1
[RGB signal] R: 0.7 Vp-p ,75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G) , 75 ohms, B: 0.7 Vp-p ,75 ohms HD, VD/SYNC: TTL,
high impedance, positive/negative automatic [YPBPR signal] Y: 1.0 Vp-p (including sync signal),
PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
high-density D-Sub 15 p (female) + 1
[RGB signal] R: 0.7 Vp-p ,75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G) , 75 ohms, B: 0.7 Vp-p ,75 ohms HD, VD/SYNC: TTL,
high impedance, positive/negative automatic [YPBPR signal] Y: 1.0 Vp-p (including sync signal),
PB/PR (CB/CR): 0.7 Vp-p, 75 ohms Pin jack + 1 1.0 Vp-p, 75 ohms
HDMI 19 pin + 2, HDCP and Deep color compatible
Audio signals : Linear PCM (Sample frequency : 48 kHz/44.1 kHz/32 kHz) 4K/30p signal input compatible
M3 stereo mini jack + 2, 0.5 V[rms], input Impedance 22 k ohms and more
Pin jack x 2(L-R), 0.5 V[rms], input Impedance 22 k ohms and more
M3 stereo mini jack + 1, 0 V[rms] to 2.0 V[rms] variable, output Impedance 2.2 k ohms and less
USB connector(type A) + 1 for Memory Viewer/Wireless Module (Out put 5V MAX 2A On standby, power supply is impossible when [STANDBY MODE] is set to [ECO].)
D-sub 9 pin + 1, RS-232C compliant, for computer control use
As of June 2019 |
2 / 1 0 |
VMZ60G_STI_01_01/06/2019
LCD Projector
PT-VMZ60
Terminals |
|
DIGITAL LINK/LAN |
RJ-45 × 1 for network and DIGITAL LINK (video/network/serial control) |
|
|
|
(HDBaseT™ compliant), PJLinkTM (class 2)compatible, 100Base-TX, |
|
|
|
HDCP compatible, Deep Color compatible 4K/30p signal input compatible |
|
|
LAN |
RJ-45 × 1 for network connection, PJLinkTM (class 2) compatible, |
|
|
|
10Base-T/100Base-TX |
|
|
|
|
Power cord length |
|
2.0 m (6 ft 7 in) |
|
Cabinet materials |
|
Molded plastic |
|
Dimensions (W × H × D) |
|
399 x 133*7 x 348mm (15-23/32 x 5-1/4*7 x 13-11/16in) |
|
Weight |
|
Approx. 7.2 kg (15.9 lbs.) |
|
|
|
|
|
Operation noise |
|
37 dB[When [LIGHT POWER] is set to [NORMAL]] / |
|
|
|
|
27 dB[When [LIGHT POWER] is set to [QUIET]] |
|
|
|
|
Laser |
|
Laser Class |
USA and Canada: Class 3R (IEC 60825-1:2007) |
Classi cation |
|
|
Other countries or regions: Class 1 (IEC/EN 60825-1:2014) |
|
|
|
|
|
|
Risk Group |
Risk Group 2 (IEC 62471-5:2015) |
Operating temperature |
|
0 – 45 °C (32 –113 °F) *8 |
|
Operating humidity |
|
20%– 80% (no condensation) |
NOTE:
The <DIGITAL LINK/LAN> terminal and the <LAN> terminal are connected inside the projector. When using both the <DIGITAL LINK/ LAN> terminal and the <LAN> terminal, configure the system to prevent them from being connected to the same network directly or via the
peripheral devices such as a hub or twisted-pair-cable transmitter.
Remote control unit
Power supply |
3 V DC (AAA/R03/LR03 battery × 2) |
Operation range |
Approx. 30 m (98 ft 5 in) when operated from directly in front of the |
|
signal receptor |
|
|
Dimensions (W × H × D) |
48 × 145 × 27 mm (1-7/8 × 5-23/32 × 1-1/16 in) |
Weight*9 |
Approx. 102 g (3.6 ozs.) including batteries |
Other Applications |
Multi Monitoring and Control Software (for Windows) |
|
Logo Transfer Software (for Windows) |
|
Presenter Light Software (for Windows) |
|
Wireless Projector (for iOS / Android) |
Supplied accessories |
Power cord with secure lock (× 1) (× 2 for Europe / ASIA models) |
|
Wireless remote control unit (× 1) |
|
Batteries for remote control (AAA/R03 or AAA/LR03 battery x 2) |
|
Lens cap (× 1) |
|
String (× 1) (for lens cap) |
Optional accessories
Digital interface box
Digital LINK Switcher
Ceiling mount bracket
Attachment for ceiling mount bracket Early Warning Software Replacement Filter Unit
Wireless module
ET-YFB100G
ET-YFB200G
ET-PKL100H (for high ceilings) ET-PKL100S (for low ceilings) ET-PKV400B
ET-SWA100*10 ET-RFV500 AJ-WM50*11
*1 When the standby mode is set to ECO, network functions such as power on over the LAN network will not operate, Only certain commands can be received for external control using the serial terminal.
*2 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2012 international standards. *3 Indicated average light-output value of all shipper products.
*4 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, NORMAL Mode, Dynamic Contrast [2],
under conditions with 30 °C (86 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light output declines to 50 % varies depending on environment.
*5 Usage environment affects the duration of filter.
*6 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only *7 With legs at shortest position.
*8 The projector cannot be used at an altitude of 2 700 m (8 858') or higher above sea level.
In the following operating environment, the light output may decrease to protect the projector.
When the projector is operated at an altitude below 700 m (2 297') and the ambient temperature exceeds 36°C (97°F)
When the projector is operated at an altitude between 700 m (2 297') and 1 400 m (4 593') exclusive and the ambient temperature exceeds 34°C (93°F)When the projector is operated at an altitude between 1 400 m (4 593') and 2 100 m (6 890') exclusive and the ambient temperature exceeds 32°C (90°F)When the projector is operated at an altitude between 2 100 m (6 890') and 2 700 m (8 858') exclusive and the ambient temperature exceeds 30°C (86°F)
*9 Average value. Weight varies for each product.
*10 Part number suffix may differ depending on the license type.
*11 In this document, the suffixes at the end of the model numbers are omitted.
NOTE:
The optional wireless module (Model No: AJ-WM50) should be used within the environmental temperature range of 0 (32°F)to 40 (104°F)when attached to the projector.
As of June 2019 |
3 / 1 0 |
VMZ60G_STI_01_01/06/2019