Panasonic PT-LB332U, PT-LW362U, PT-LW312U, PT-LB412U, PT-LB382U User Manual
Operating Instructions
Functional Manual
LCD Projector
Model No.
Commercial Use
PT-LW362
PT-LW312
PT-LB412
PT-LB382
PT-LB332
Thank you for purchasing this Panasonic Product.
■ This manual is intended for products manufactured from May 2016 and beyond.
■ Before operating this product, please read the instructions carefully, and save this manual
for future use.
■ Before using your projector, be sure to read “Read this rst!” (x pages 2 to 9).
ENGLISH
TQBJ0839-2
Read this rst!
Read this rst!
WARNING:
WARNING:
The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.
WARNING:
1. Remove the plug from the mains socket when this unit is not in use for a prolonged period of time.
2. To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualied service
personnel.
3. Do not remove the earthing pin on the mains plug. This apparatus is equipped with a three prong earthing type mains
plug. This plug will only t an earthing-type mains socket. This is a safety feature. If you are unable to insert the plug into
the mains socket, contact an electrician. Do not defeat the purpose of the earthing plug.
WARNING:
THIS APPARATUS MUST BE EARTHED.
To prevent damage which may result in re or shock hazard, do not expose this appliance to rain or moisture.
This device is not intended for use in the direct eld of view at visual display workplaces. To avoid
incommoding reexions at visual display workplaces this device must not be placed in the direct eld of view.
The equipment is not intended for used at a video workstation in compliance BildscharbV.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
AVERTISSEMENT:RISQUEDECHOCÉLECTRIQUE
NEPASOUVRIR.
WARNUNG:ZURVERMEIDUNGEINES
ELEKTRISCHENSCHLAGESGERÄTNICHTÖFFNEN.
ПРЕДУПРЕЖДЕНИЕ:ОПАСНОСТЬ ПОРАЖЕНИЯ
ЭЛЕКТРИЧЕСКИМ ТОКОМ НЕ ОТКРЫВАТЬ.
경고:감전 위험이 있으므로 열지마십시오.
The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to
o
7
WARNING:
CAUTION:
This is a device to project images onto a screen, etc., and is not intended for use as indoor lighting in a domestic
environment.
Importer's name and address within the European Union
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany
the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufcient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the product.
TURN THE POWER OFF AND DISCONNECT THE POWER PLUG FROM THE WALL OUTLET
BEFORE REPLACING THE LAMP UNIT.
To assure continued compliance, follow the attached installation instructions. This includes using the
provided power cord and shielded interface cables when connecting to computer or peripheral devices. Also,
any unauthorized changes or modications to this equipment could void the user's authority to operate this
device.
Directive 2009/125/EC
2 - ENGLISH
Read this rst!
CAUTION (North/Middle/South America)
CAUTION:
This equipment is equipped with a three-pin grounding-type power
plug. Do not remove the grounding pin on the power plug. This plug
will only t a grounding-type power outlet. This is a safety feature. If
you are unable to insert the plug into the outlet, contact an electrician.
Do not defeat the purpose of the grounding plug.
Do not remove
FCC NOTICE (USA)
Declaration of Conformity
Model Number: PT-LW362 / PT-LW312 / PT-LB412 / PT-LB382 / PT-LB332
Trade Name: Panasonic
Responsible Party: Panasonic Corporation of North America
Address: Two Riverfront Plaza, Newark, NJ 07102-5490
General Contact: http://www.panasonic.com/support
Projector Contact: http://panasonic.net/avc/projector/
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
To assure continued compliance, follow the attached installation instructions and do not make any unauthorized
modications.
CAUTION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
f Reorient or relocate the receiving antenna.
f Increase the separation between the equipment and receiver.
f Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
f Consult the dealer or an experienced radio/BD technician for help.
The user may nd the booklet “Something About Interference” available from FCC local regional ofces helpful.
FCC Warning:
To assure continued FCC emission limit compliance, follow the attached installation instructions. This includes
using the provided power cord and shielded interface cables when connecting to computer or peripheral
devices. Also, any unauthorized changes or modications to this equipment could void the user’s authority to
operate this device.
WARNING:
• Not for use in a computer room as dened in the Standard for the Protection of Electronic Computer/Data
Processing Equipment, ANSI/NFPA 75.
• For permanently connected equipment, a readily accessible disconnect device shall be incorporated in the
building installation wiring.
• For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily
accessible.
ENGLISH - 3
Read this rst!
13A250V
BS1363/A
HE-8
N
ASA
L
Notice (USA only):
• This product has a High Intensity Discharge (HID) lamp that contains mercury. Disposal may be regulated
in your community due to environmental considerations. For disposal or recycling information, please visit
Panasonic website: http://www.panasonic.com/environmental or call 1-888-769-0149.
NOTIFICATION (Canada)
This class B digital apparatus complies with Canadian ICES-003.
Contains mercury / Contenu avec mercure
For more information on safe handling
procedures, the measures to be taken in
case of accidental breakage and safe
disposal options visit:
ec.gc.ca/mercure-mercury/.
Dispose of or recycle in accordance with
applicable laws.
Pour plus de renseignements sur les
procédures de manutention sécuritaire, les
mesures à prendre en cas de bris accidentel et
les options d’élimination sécuritaire visitez:
ec.gc.ca/mercure-mercury/.
Mettez au rebut ou recyclez conformément
aux lois applicables.
IMPORTANT: THE MOULDED PLUG (U.K. only)
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is tted in
this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of 13 amps and that it
is approved by ASTA or BSI to BS1362.
Check for the ASTA mark or the BSI mark on the body of the fuse.
If the plug contains a removable fuse cover, you must ensure that it is retted when the fuse is replaced. If you lose the fuse
cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from an
Authorised Service Center.
If the tted moulded plug is unsuitable for the mains socket in your home, then the fuse should be removed and the plug cut
off and disposed of safely. There is a danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket.
If a new plug is to be tted, please observe the wiring code as shown below.
If in any doubt, please consult a qualied electrician.
WARNING:
THIS APPLIANCE MUST BE EARTHED.
IMPORTANT:
The wires in this mains lead are coloured in accordance with the following code:
Green - and - Yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows.
The wire which is coloured GREEN - AND - YELLOW must be connected to the terminal in the plug which is
marked with the letter E or by the Earth symbol or coloured GREEN or GREEN - AND - YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the
letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the
letter L or coloured RED.
How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.
4 - ENGLISH
Read this rst!
WARNING:
POWER
The wall outlet shall be installed near the equipment and shall be easily accessible when problems occur. If the following problems occur, disconnect the power plug from the wall outlet immediately.
Continued use of the projector in these conditions will result in re or electric shock.
z If foreign objects or water get inside the projector, disconnect the power plug from the wall outlet.
z If the projector is dropped or the cabinet is broken, disconnect the power plug from the wall outlet.
z If you notice smoke, strange smells or noise coming from the projector, disconnect the power plug from the
wall outlet.
Please contact an Authorized Service Center for repairs, and do not attempt to repair the projector yourself.
During a thunderstorm, do not touch the projector or the cable.
Electric shocks can result.
Do not do anything that might damage the power cord or the power plug.
If the power cord is used while damaged, electric shocks, short-circuits or re will result.
zDo not damage the power cord, make any modications to it, place it near any hot objects, bend it
excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle.
Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary.
Completely insert the power plug into the wall outlet and the power connector into the projector
terminal.
If the plug is not inserted correctly, electric shocks or overheating will result.
z Do not use plugs which are damaged or wall outlets which are coming loose from the wall.
Do not use anything other than the provided power cord.
Failure to observe this will result in electric shocks or re. Please note that if you do not use the provided power
cord to ground the device on the side of the outlet, this may result in electric shocks.
Clean the power plug regularly to prevent it from becoming covered in dust.
Failure to observe this will cause a re.
zIf dust builds up on the power plug, the resulting humidity can damage the insulation.
zIf not using the projector for an extended period of time, pull the power plug out from the wall outlet.
Pull the power plug out from the wall outlet and wipe it with a dry cloth regularly.
Do not handle the power plug and power connector with wet hands.
Failure to observe this will result in electric shocks.
Do not overload the wall outlet.
If the power supply is overloaded (ex., by using too many adapters), overheating may occur and re will result.
ON USE/INSTALLATION
Do not place the projector on soft materials such as carpets or sponge mats.
Doing so will cause the projector to overheat, which can cause burns, re or damage to the projector.
Do not set up the projector in humid or dusty places or in places where the projector may come into
contact with oily smoke or steam.
Using the projector under such conditions will result in re, electric shocks or components deterioration. Components deterioration (such as ceiling mount brackets) may cause the projector which is mounted on the ceiling
to fall down.
Do not install this projector in a place which is not strong enough to take the full weight of the projector or on top of a surface which is sloped or unstable.
Failure to observe this will cause projector to fall down or tip over the projector, and severe injury or damage
could result.
Installation work (such as ceiling mount bracket) should only be carried out by a qualied technician.
If installation is not carried out and secured correctly it can cause injury or accidents, such as electric shocks.
z Be sure to use the wire provided with the projector mount bracket for ceiling mount as an extra safety mea-
sure to prevent the projector from falling down (Install in a different location to the ceiling mount bracket).
Do not cover the air intake/exhaust ports.
Doing so will cause the projector to overheat, which can cause re or damage to the projector.
z Do not place the projector in narrow, badly ventilated places.
z Do not place the projector on cloth or papers, as these materials could be drawn into the air intake port.
z Provide at least 1 m (40") of space between any walls or objects and the exhaust port, and at least 50 cm
(20") of space between any walls or objects and the intake port.
ENGLISH - 5
Read this rst!
WARNING:
Do not place your hands or other objects close to the air exhaust port.
Doing so will cause burns or damage your hands or other objects.
z Heated air comes out of the air exhaust port. Do not place your hands or face, or objects which cannot
withstand heat close to this port.
Do not look and place your skin into the lights emitted from the lens while the projector is being used.
Doing so can cause burns or loss of sight.
z Strong light is emitted from the projector’s lens. Do not look or place your hands directly into this light.
z Be especially careful not to let young children look into the lens. In addition, turn off the power and discon-
nect the power plug when you are away from the projector.
Never attempt to remodel or disassemble the projector.
High voltages can cause re or electric shocks.
z For any inspection, adjustment and repair work, please contact an Authorized Service Center.
Do not allow metal objects, ammable objects, or liquids to enter inside of the projector. Do not allow
the projector to get wet.
Doing so may cause short circuits or overheating, and result in re, electric shock, or malfunction of the projector.
z Do not place containers of liquid or metal objects near the projector.
z If liquid enters inside of the projector, consult your dealer.
z Particular attention must be paid to children.
Use the ceiling mount bracket specied by Panasonic.
Defects in the ceiling mount bracket will result in falling accidents.
z Attach the supplied safety cable to the ceiling mount bracket to prevent the projector from falling down.
Do not touch or remove the rubber cap at the bottom of the projector.
z Doing so will cause burns because the temperature is very high when the lamp is lighting and for a while
after the lamp is turned off.
ACCESSORIES
Do not use or handle the batteries improperly, and refer to the following.
Failure to observe this will cause burns, batteries to leak, overheat, explode or catch re.
z Do not use unspecied batteries.
z Do not use chargeable batteries.
z Do not disassemble dry cell batteries.
z Do not heat the batteries or place them into water or re.
z Do not allow the + and - terminals of the batteries to come into contact with metallic objects such as neck-
laces or hairpins.
z Do not store or carry batteries together with metallic objects.
z Store the batteries in a plastic bag and keep them away from metallic objects.
z Make sure the polarities (+ and -) are correct when inserting the batteries.
z Do not use a new battery together with an old battery or mix different types of batteries.
z Do not use batteries with the outer cover peeling away or removed.
Do not allow children to reach the batteries and the rubber cap that is removed from the bottom of the
projector.
Accidentally swallowing them can cause physical harm.
z If swallowed, seek medical advice immediately.
If the battery uid leaks, do not touch it with bare hands, and take the following measures if necessary.
z Battery uid on your skin or clothing could result in skin inammation or injury.
Rinse with clean water and seek medical advice immediately.
z Battery uid coming in contact with your eyes could result in loss of sight.
In this case, do not rub your eyes. Rinse with clean water and seek medical advice immediately.
Do not disassemble the lamp unit.
If the lamp breaks, it could cause injury.
Lamp replacement
The lamp has high internal pressure. If improperly handled, an explosion and severe injury or accidents will
result.
z The lamp can easily explode if struck against hard objects or dropped.
z Before replacing the lamp, be sure to disconnect the power plug from the wall outlet.
Electric shocks or explosions can result if this is not done.
z When replacing the lamp, turn the power off and allow the lamp it to cool for at least 1 hour before handling
it otherwise it can cause burns.
6 - ENGLISH
Read this rst!
WARNING:
Do not use the supplied power cord with devices other than this projector.
z Using the supplied power cord with devices other than this projector may cause short circuits or overheat-
ing, and result in electric shock or re.
Remove the depleted batteries from the remote control promptly.
z Leaving them in the unit may result in uid leakage, overheating, or explosion of the batteries.
CAUTION:
POWER
When disconnecting the power cord, be sure to hold the power plug and power connector.
If the power cord itself is pulled, the lead will become damaged, and re, short-circuits or serious electric
shocks will result.
When not using the projector for an extended period of time, disconnect the power plug from the wall
outlet.
Failure to do so may result in re or electric shock.
Disconnect the power plug from the wall outlet before carrying out any cleaning and replacing the unit.
Electric shocks can result if this is not done.
ON USE/INSTALLATION
Do not place heavy objects on top of the projector.
Failure to observe this will cause the projector to become unbalanced and fall, which could result in damage or
injury. The projector will be damaged or deformed.
Do not put your weight on this projector.
You could fall or the projector could break, and injury will result.
z Be especially careful not to let young children stand or sit on the projector.
Do not place the projector in extremely hot locations.
Doing so will cause the outer casing or internal components to deteriorate, or result in re.
z Take particular care in locations exposed to direct sunlight or near stoves.
Do not place the projector where it may be affected by salt or corrosive gas.
Doing so may cause the projector to become faulty due to corrosion.
Do not place objects in front of the lens while the projector is being used.
Doing so can cause re or damage to the object and can cause the projector to malfunction.
z Extremely strong light is emitted from the projector’s lens.
Do not stand in front of the lens while the projector is being used.
Doing so can cause damage and burns to clothing.
z Extremely strong light is emitted from the projector’s lens.
Always disconnect all cables before moving the projector.
Moving the projector with cables still attached can damage the cables, which will cause re or electric shocks to
occur.
When mounting the projector on the ceiling, keep mounting screws and power cord from contacting
with metal parts inside the ceiling.
Contact with metal parts inside the ceiling can cause electric shocks.
Never plug headphones and earphones into <VARIABLE AUDIO OUT> terminal.
Excessive sound pressure from earphones and headphones can cause hearing loss.
ACCESSORIES
Do not use the old lamp unit.
If used it could cause lamp explosion.
If the lamp has broken, ventilate the room immediately. Do not touch or bring your face close to the
broken pieces.
Failure to observe this will cause the user to absorb the gas which was released when the lamp broke and which
contains nearly the same amount of mercury as uorescent lamps, and the broken pieces will cause injury.
z If you believe that you have absorbed the gas or that the gas has got into your eyes or mouth, seek medical
advice immediately.
z Ask your dealer about replacing the lamp unit and check the inside of the projector.
ENGLISH - 7
Read this rst!
(ii)
CAUTION:
When not using the projector for an extended period of time, remove the batteries from the remote
control.
Failure to observe this will cause the batteries to leak, overheat, catch re or explode, which may result in re or
contamination of surrounding area.
MAINTENANCE
Ask your dealer about cleaning inside the projector once a year.
Continuous use while dust is accumulated inside the projector may result in re.
z For cleaning fee, ask your dealer.
Brazil Only
Brasil Apenas
Manuseio de baterias usadas
BRASIL
Após o uso, as pilhas e /ou baterias deverão
ser entregues ao estabelecimento comercial
ou rede de assistência técnica autorizada.
Cobrir os terminais positivo (+) e negativo (-) com uma ta isolante adesiva, antes de depositar numa caixa
destinada para o recolhimento. O contato entre partes metálicas pode causar vazamentos, gerar calor, romper
a blindagem e produzir fogo. (Fig. 1)
Fig. 1
Como isolar os terminais
Não desmonte, não remova o invólucro, nem amasse a bateria. O gás liberado pela bateria pode irritar a
garganta, danicar o lacre do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo
devido ao curto circuito dos terminais. Não incinere nem aqueça as baterias, elas não podem car expostas a
temperaturas superiores a 100 °C (212 °F). O gás liberado pela bateria pode irritar a garganta, danicar o lacre
do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo devido ao curto circuito dos
terminais provocado internamente.
Evite o contato com o liquido que vazar das baterias. Caso isto ocorra, lave bem a parte afetada com bastante
água. Caso haja irritação, consulte um médico.
Fita Isolante
Fita Isolante
Remoção das baterias
1. Pressione a guia e levante a tampa. 2. Remova as baterias.
(i)
8 - ENGLISH
Read this rst!
To remove the battery
1. Press the guide and lift the cover. 2. Remove the batteries.
(ii)
(i)
r Trademarks, etc.
f Windows, Windows Vista and Internet Explorer are registered trademarks or trademarks of Microsoft Corporation in the
United States and other countries.
f Mac, Mac OS, OS X, iPad, iPhone, iPod touch and Safari are trademarks of Apple Inc., registered in the United States and
other countries.
f IOS is a trademark and registered trademark of Cisco in the United States and other countries and is used under license.
f Android is a trademark of Google Inc.
f HDMI, the HDMI logo and High-Denition Multimedia Interface is a trademark or registered trademark of HDMI
Licensing LLC.
f VueMagic is a trademark of Pixelworks, Inc.
f PJLink™ is a trademark or pending trademark in Japan, the United States, and other countries and regions.
f Adobe and Adobe Reader are trademarks or registered trademarks of Adobe Systems Inc. in the United States and/or other
countries.
f All other names, company names, and product names mentioned in this manual are trademarks or registered trademarks of
their respective owners.
Please note that the ® and TM symbols are not specied in this manual.
r Software information regarding this product
This product incorporates the following software.
(1) The software which is developed independently by or for Panasonic Corporation
(2) The software owned by third party and licensed to Panasonic Corporation
(3) The software which is licensed under the GNU GENERAL PUBLIC LICENSE Version2.0 (GPL V2.0)
(4) The software which is licensed under the GNU LESSER GENERAL PUBLIC LICENSE Version2.1 (LGPL V2.1)
(5) Open source software which is not licensed under the GPL V2.0 and LGPL V2.1
The software categorized as (3) ~ (5), the license is available in accordance with gnu general public license and gnu lesser
general public license respectively, it is distributed in the hope that it will be useful, but without any warranty, without even the
implied warranty of merchantability or tness for a particular purpose. As for the terms and conditions, please refer to the software license of the supplied CD-ROM.
If you wish to ask any questions as to the software, please contact (sav.pj.gpl.pavc@ml.jp.panasonic.com) by email.
r Illustrations in these operating instructions
f Illustrations of the projector, screen, and other parts may vary from the actual product.
r Page references
f Reference pages in this manual are indicated as : (x page 00).
r Terms
f In this manual, the “Wireless remote control unit” accessory is referred to as the “Remote control”.
f The <INPUT/ENTER> button on the control panel is functioned as the <ENTER> button when the menu screen is displayed.
The operating procedure of menu screen is described as "Press the <ENTER> button" in this manual in order to unify the
control panel operation with the remote control operation.
ENGLISH - 9
Features of the Projector
Quick Steps
Comfortable viewing in a bright
environment
▶ The high contrast ratio 12 000 : 1 is
achieved in a compact body.
▶ The low noise level 28 dB*1 supports
comfortable viewing during quiet scenes.
▶ Supports comfortable viewing in a bright
room by pressing the <DAYLIGHT VIEW>
button on the remote control. (Daylight
View Lite function)
*1 When [Lamp control] is set to [ (Eco 2)]
Abundant Image correction Function
▶ H/V Keystone, Corner correction and
Curved correction functions allow you to
correct the image to t the screen.
Reduced maintenance costs
For details, see the corresponding pages.
1. Set up your projector.
(x page 26)
2. Connect with other devices.
(x page 31)
3. Connect the power cord.
(x page 35)
4. Power on.
(x page 36)
▶ Maintenance costs are reduced by use of a
recommended lamp replacement interval of
10 000 H*1.
*1 When [Lamp control] is constantly set to [ (Eco 2)]
without switching to other modes
This time is only the target for replacement and not the
warranty time.
5. Select the input signal.
(x page 38)
6. Adjust the image.
(x page 38)
10 - ENGLISH
Contents
Contents
Contents
Read this first! ............................................2
Chapter 1 Preparation
Precautions for use ................................................. 14
Cautions when transporting .................................. 14
Cautions when installing ....................................... 14
Security ................................................................ 15
Cautions on use ................................................... 15
Notes on Using Wireless Connection ................... 16
Disposal ................................................................ 17
Accessories .......................................................... 18
Contents of the supplied CD-ROM ....................... 19
Optional accessories ............................................ 19
About your projector ............................................... 20
Remote control ..................................................... 20
Projector body ...................................................... 21
Preparing the remote control ................................. 24
Inserting and Removing batteries ......................... 24
When using the multiple projectors ...................... 24
Chapter 2 Getting Started
Setting up ................................................................. 26
Installation mode .................................................. 26
Parts for ceiling mount (Optional) ......................... 26
Screen size and throw distance ........................... 27
Adjusting adjustable foot ...................................... 30
Connecting ............................................................... 31
Before connecting ................................................ 31
Connecting example : AV equipment ................... 32
Connecting example : Computers ........................ 33
Chapter 3 Basic Operations
Powering on/off ....................................................... 35
Connecting the power cord .................................. 35
Power indicator ..................................................... 35
Powering On the Projector ................................... 36
A PIN code input screen appears ........................ 36
Making adjustments and selections ..................... 37
Powering Off the Projector ................................... 37
Projecting ................................................................. 38
Selecting the input signal ..................................... 38
How to adjust the state of the image .................... 38
Basic operations by using the remote control ..... 39
Using the automatic setup function ...................... 39
Switching the input signal ..................................... 39
Switching the aspect ratio of the image ................ 40
Using the keystone distortion and curved
correction functions ........................................... 40
Using the information function .............................. 40
Using the freeze function ...................................... 41
Be sure to read “Read this rst!” from page 2.
Using the AV mute function .................................. 41
Using the presentation timer function ................... 41
Switching the lamp power .................................... 41
Using the digital zoom function ............................ 41
Controlling the volume of the speaker .................. 42
Switching the image mode ................................... 42
Using the mute function ........................................ 42
Using the Daylight View Lite function ................... 43
Setting the remote control ID numbers ................. 43
Chapter 4 Settings
Menu Navigation ...................................................... 45
Navigating through the menu ............................... 45
Main menu ............................................................ 46
Sub-menu ............................................................. 47
Input menu ............................................................... 49
Switching the input source ................................... 49
[Display] menu ......................................................... 50
[Auto PC adj.] ....................................................... 50
[Fine sync] ............................................................ 50
[H Position] ........................................................... 50
[V Position] ........................................................... 51
[H.Size] ................................................................. 51
[Aspect] ................................................................ 51
[Project way] ......................................................... 52
[Menu position] ..................................................... 52
[Background display] ............................................ 52
[System] ............................................................... 52
[Color adjust] menu ................................................. 53
[Image mode] ....................................................... 53
[Contrast] .............................................................. 53
[Brightness] .......................................................... 53
[Color] ................................................................... 54
[Tint] ...................................................................... 54
[Color temp.] ......................................................... 54
[Red] / [Green] / [Blue] .......................................... 54
[Sharpness] .......................................................... 55
[Daylight View] ...................................................... 55
[Setting] menu ......................................................... 56
[On start] ............................................................... 56
[Standby mode] .................................................... 56
[High land] ............................................................ 56
[Lamp control] ....................................................... 57
[Cooling fast] ........................................................ 57
[Closed caption] .................................................... 57
[Key lock] .............................................................. 58
[Iris] ....................................................................... 58
[Sound] ................................................................. 58
[HDMI Setup] ........................................................ 59
[Expand] menu ......................................................... 60
[Language] ........................................................... 60
[Auto setup] .......................................................... 60
ENGLISH - 11
Contents
[Keystone] ............................................................ 62
[Logo] ................................................................... 64
[Security] .............................................................. 66
[Power management] ........................................... 68
[Filter counter] ...................................................... 68
[Test pattern] ......................................................... 69
[Network] .............................................................. 69
[Remote control] ................................................... 70
[Factory default] .................................................... 71
[Memory Viewer] menu ........................................... 72
[Set Slide] ............................................................. 72
[Slide Transition Effect] ......................................... 72
[Sort Order] ........................................................... 72
[Rotate] ................................................................. 72
[Best Fit] ............................................................... 73
[Repeat] ................................................................ 73
[Apply] .................................................................. 73
[Info.] menu ............................................................. 74
[Info.] .................................................................... 74
Chapter 5 Operation of Function
Chapter 7 Appendix
Technical Information ........................................... 102
Using the PJLink protocol ................................... 102
<SERIAL IN> terminal ........................................ 103
List of compatible signals ................................... 106
Specications ........................................................ 108
Dimensions ............................................................ 110
Ceiling mount bracket safeguards........................111
Index ....................................................................... 112
About Memory Viewer function .............................. 76
What you can project with the Memory Viewer
function .............................................................. 76
Cautions on using USB Memory .......................... 76
Displaying the Memory Viewer screen ................. 77
Playing the pictures .............................................. 77
Executing the slide ............................................... 77
Playing the video .................................................. 77
Displaying the PDF .............................................. 78
Termination of the Memory Viewer ....................... 78
USB Display function .............................................. 79
When using Windows ........................................... 79
When using Mac OS ............................................ 80
Network connection ................................................ 81
When connecting via wired LAN .......................... 81
When connecting via wireless LAN ...................... 82
About Presenter Light ............................................. 84
About VueMagic ...................................................... 85
Web control function ............................................... 86
Computer that can be used for setting ................. 86
Accessing from the web browser ......................... 86
Chapter 6 Maintenance
Power/Warning Indicators ...................................... 93
When an indicator lights up .................................. 93
Maintenance/replacement....................................... 95
Before performing maintenance/replacement ...... 95
Maintenance ......................................................... 95
Replacing the unit ................................................. 97
Troubleshooting .................................................... 100
12 - ENGLISH
Chapter 1 Preparation
This chapter describes things you need to know or check before using the projector.
ENGLISH - 13
Chapter 1 Preparation - Precautions for use
Precautions for use
Cautions when transporting
f When transporting the projector, handle it with care and avoid excessive vibration and impacts. Doing so may damage the
internal parts and result in malfunctions.
f Do not transport the projector with the adjustable foot extended. Doing so may damage the adjustable foot.
f Do not move or transport the projector with the wireless module (Model No.: ET-WML100) of the optional accessories
attached. Doing so may damage the wireless module.
Cautions when installing
rDo not set up the projector outdoors.
The projector is designed for indoor use only.
rDo not set up the projector in the following locations.
f Places where vibration and impacts occur such as in a car or vehicle: Doing so may cause damage to internal components
or malfunction.
f Locations near the sea or areas affected by corrosive gas: Corrosion may damage internal components or cause the
projector to malfunction.
f Near the exhaust of an air conditioner: Depending on the conditions of use, the screen may uctuate in rare cases due
to the heated air from the air exhaust port or the hot or cooled air. Make sure that the exhaust from the projector or other
equipment, or the air from the air conditioner does not blow toward the front of the projector.
f Places with sharp temperature uctuations such as near lights (studio lamps): Doing so may shorten the life of the lamp, or
result in deformation of the outer case due to heat, which may cause malfunctions.
The operating environment temperature of the projector should be between 5 °C (41 °F) and 40 °C (104 °F) when using
it at elevations lower than 1 400 m (4 593') above sea level, between 5 °C (41 °F) and 35 °C (95 °F) when using it at high
altitudes (between 1 400 m (4 593') and 2 700 m (8 858') above sea level), and between 5 °C (41 °F) and 30 °C (86 °F)
when using it at high altitudes (between 2 700 m (8 858') and 3 000 m (9 843') above sea level).
f Near high-voltage power lines or near motors: Doing so may interfere with the operation of the projector.
rBe sure to ask a specialized technician when installing the product to a ceiling.
This requires an optional ceiling mount bracket. Be sure to use the Projector Mount Bracket together with the ceiling mount
bracket for high ceilings or low ceilings.
Model No.:
ET-PKL100H (for high ceilings), ET-PKL100S (for low ceilings), ET-PKL420B (Projector Mount Bracket)
rWhen using the projector in the elevation of below 1 400 m (4 593'), make sure [High
land] is set to [Off].
Failure to do so may shorten the life of the internal parts and result in malfunctions.
rWhen using the projector in the elevation of above 1 400 m (4 593') and below 2 700 m
(8 858'), make sure [High land] is set to [On 1].
Failure to do so may shorten the life of the internal parts and result in malfunctions.
rWhen using the projector in the elevation of above 2 700 m (8 858') and below 3 000 m
(9 843'), make sure [High land] is set to [On 2].
Failure to do so may shorten the life of the internal parts and result in malfunctions.
rDo not install the projector at elevations of 3 000 m (9 843') or higher above sea level.
Failure to do so may shorten the life of the internal parts and result in malfunctions.
rDo not tilt the projector or place it on its side.
Do not tilt the projector body more than approximately ±30 degrees vertically or ±15 degrees horizontally. Over tilting may
result in shortening the life of the components.
Within 30°
Within 30°
14 - ENGLISH
Within 15°
Within 15°
Chapter 1 Preparation - Precautions for use
rCautions when setting the projectors
f Do not stack the projectors.
f Do not use the projector supporting it by the top.
f Do not block the ventilation ports (intake and exhaust) of the projector.
f Avoid heating and cooling air from the air conditioning system directly blow to the ventilation ports (intake and exhaust) of
the projector.
over 500 mm
(19-11/16")
over 500 mm
(19-11/16")
f Do not install the projector in a conned space.
When placing the projector in a conned space, a ventilation and/or air conditioning system is required. Exhaust heat may
accumulate when the ventilation is not enough, triggering the protection circuit of the projector.
over 1 000 mm
(39-3/8")
over 200 mm
(7-7/8")
Security
Take safety measures against following incidents.
f Personal information being leaked via this product.
f Unauthorized operation of this product by a malicious third party.
f Interfering or stopping of this product by a malicious third party.
Security instruction (Æ pages 66, 88)
f Make your password as difcult to guess as possible.
f Change your password periodically.
f Panasonic or its afliate company never inquires a password directly to a customer. Do not tell your password in case you
receive such an inquiry.
f The connecting network must be secured by rewall or others.
f Set a password for web control and restrict the users who can log in.
Cautions on use
rTo get a good picture quality
f Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light from indoor
lamps from shining onto the screen.
f Depending on where the projector is used, heated air from an exhaust port or warm or cold air from an air conditioner can
cause a shimmering effect on screen.
Avoid using in locations where exhaust or streams of air from projector, other devices and air conditioners ow between the
projector and the screen.
f The lens of projector is affected by the heat from the luminous source. Because of this, the focusing may not be stable right
after the power is turned on. Focusing is stabled after projecting image for 30 minutes and longer.
rDo not touch the surface of the projector lens with your bare hand.
If the surface of the lens becomes dirty from ngerprints or anything else, this will be magnied and projected onto the screen.
ENGLISH - 15
Chapter 1 Preparation - Precautions for use
rLCD Panel
The display unit of this projector comprises three LCD panels. Although an LCD panel is a product of high-precision
technology, some of the pixels on the projected image may be missing or constantly lit. Please note that this is not a
malfunction.
Displaying a still image for a longer time may result in an after-image on the LCD panels. If this happens, display the all white
screen in the Test pattern for an hour or more.
rOptical components
Operating the projector in an environment with high temperature or heavy exposure to dust or tobacco smoke will reduce the
service life of the optical components, such as the LCD panel and polarizing plate, and may necessitate their replacement
within less than one year of use. For details, consult your dealer.
rLamp
The luminous source of the projector is a mercury lamp with high internal pressure.
A high pressure mercury lamp has following characteristics.
f The brightness of the lamp will decrease by duration of usage.
f The lamp may burst with sound or shorten life by shock or chipping.
f The life of the lamp varies greatly depending on individual specicities and usage conditions. In particular, continuous use
over 6 hours and frequent on/off switching of the power greatly deteriorate the lamp and affect the lamp life.
f In rare cases, the lamp burst shortly after the projection.
f The risk of bursting increases when the lamp is used beyond its replacement cycle. Make sure to replace the lamp unit
consistently. (“When to replace the lamp unit” (x page 97), "Replacing the lamp unit" (x page 98))
f If the lamp bursts, gas contained inside of the lamp is released in a form of smoke.
f It is recommended to store replacement lamps for contingency.
rComputer and external device connections
f When connecting a computer or an external device, read this manual carefully regarding the use of power cords and
shielded cables as well.
Notes on Using Wireless Connection
Wireless connection function of the projector uses radio waves in the 2.4 GHz band.
A radio station license is not required, but be sure to read and fully understand the following items before use.
The wireless module (Model No.: ET-WML100) of optional accessories must be installed when you want to use the wireless
LAN function of this projector.
r Do not use near other wireless equipment.
The following equipment may use radio waves in the same band as the projector.
When the projector is used near these devices, radio wave interference may make communication impossible, or the
communication speed may become slower.
f Microwave ovens, etc.
f Industrial, chemical and medical equipment, etc.
f In-plant radio stations for identifying moving objects such as those used in factory manufacturing lines, etc.
f Designated low-power radio stations
r If at all possible, avoid the use of cellular phones, TV sets or radios near the projector.
Cellular phones, TV sets, radios and similar devices use different radio bands from the projector, so there is no effect on
wireless communication or the transmission and reception of these devices. However, radio waves from the projector may
produce audio or video noise.
r Wireless communication radio waves cannot penetrate steel reinforcements, metal, concrete, etc.
Communication is possible through walls and oors made from materials such as wood and glass (except glass containing
wire mesh), but not through walls and oors made from steel reinforcements, metal, concrete, etc.
r Avoid using the projector in locations prone to static electricity.
If the projector is used in a location prone to static electricity, such as on a carpet, the wireless LAN or wired LAN connection
may be lost.
If the static electricity or noise make it impossible to establish a connection with the LAN, please press the power button on the
remote control or the control panel to power off the projector, and eliminate the source of static electricity or noise, then turn on
the projector.
16 - ENGLISH
Chapter 1 Preparation - Precautions for use
r Using the projector outside the country
Note that depending on countries or regions there are restrictions on the channels and frequencies at which you can use the
wireless LAN.
r Available wireless LAN channels
The channels (frequency range) that can be used differ according to the country or region. Refer to the table below.
Country or region Standard Channels used Frequency band (Center frequency)
Global IEEE802.11b/g/n 1 - 11 channel 2.412 GHz - 2.462 GHz
The frequency and channel differ depending on the country.
Please use the wireless LAN feature in compliance with the laws of each country.
Note
f The wireless module (Model No.: ET-WML100) of the optional accessories is required if you want to use the wireless LAN
function of this projector.
About Wireless LANs
The advantage of a wireless LAN is that information can be exchanged between a PC or other such equipment and an
access point using radio waves as long as you are within range for radio transmissions.
On the other hand, because the radio waves can travel through obstacles (such as walls) and are available everywhere
within a given range, problems of the type listed below may occur if security-related settings are not made.
f A malicious third-part may intentionally intercept and monitor transmitted data including the content of e-mail and
personal information such as your ID, password, and/or credit card numbers.
f A malicious third-party may access your personal or corporate network without authorization and engage in the following
types of behavior.
Retrieve personal and/or secret information (information leak)
Spread false information by impersonating a particular person (spoong)
Overwrite intercepted communications and issue false data (tampering)
Spread harmful software such as a computer virus and crash your data and/or system (system crash)
Since most wireless LAN adapters or access points are equipped with security features to take care of these problems, you
can reduce the possibility of these problems occurring when using this product by making the appropriate security settings
for the wireless LAN device.
Some wireless LAN devices may not be set for security immediately after purchase. To decrease the possibility of
occurrence of security problems, before using any wireless LAN devices, be absolutely sure to make all security-related
settings according to the instructions given in the operation manuals supplied with them.
Depending on the specications of the wireless LAN, a malicious third-party may be able to break security settings by
special means.
Panasonic asks customers to thoroughly understand the risk of using this product without making security settings, and
recommends that the customer make security settings at their own discretion and responsibility.
Disposal
When disposing of the product, ask your local authority or dealer about the correct methods of disposal.
The lamp contains mercury. When disposing of the used lamp unit, ask your nearest local authorities or dealer about proper
disposal of the unit.
Dispose of used batteries according to the instructions or your local disposal rule or guidelines.
ENGLISH - 17
Chapter 1 Preparation - Precautions for use
Accessories
Make sure the following accessories are provided with your projector. Numbers enclosed < > show the number of accessories.
Wireless remote control unit <1>
(N2QAYA000116)
Power cord
(K2CG3YY00184)
(K2CT3YY00079) RGB signal cable <1>
CD-ROM <1>
(TXFQB02VMC9)
AAA/R03 or AAA/LR03 battery <2>
(for remote control unit)
(K1HY15YY0012)
(K2CM3YY00039)
Attention
f After unpacking the projector, discard the power cord cap and packaging material properly.
f Do not use the supplied power cord for devices other than this projector.
f For lost accessories, consult your dealer.
f Store small parts in an appropriate manner, and keep them away from young children.
Note
f The type and number of the power cord depend on the country in which you purchased the product.
f The model numbers of accessories are subject to change without prior notice.
18 - ENGLISH
Chapter 1 Preparation - Precautions for use
Contents of the supplied CD-ROM
The contents of the supplied CD-ROM are as follow.
Operating Instructions
Operating Instructions – Multi Projector Monitoring & Control Software
Operating Instructions – Presenter Light Software
Instruction/list (PDF)
Software
List of Compatible Projector Models
Software license
Multi Projector Monitoring & Control
Software (Windows)
Optional accessories
Options Model No.
ET-PKL100H (for high ceilings)
Ceiling Mount Bracket
Replacement Lamp Unit ET-LAL500
Replacement Filter Unit ET-RFL300
D-SUB - S Video conversion cable ET-ADSV
Wireless Module
*1 In this document, the alphabet letters at the end of the model numbers are omitted.
ET-PKL100S (for low ceilings)
ET-PKL420B (Projector Mount Bracket)
ET-WML100E / ET-WML100U
*1
This is a list of projectors that are compatible with the Multi Projector Monitoring & Control Software and its restrictions.
The open source software licenses that
used in this projector are included in the
PDF les.
This software allows you to monitor and
control multiple projectors connected to
the LAN.
Note
f The model numbers of optional accessories are subject to change without prior notice.
ENGLISH - 19
Chapter 1 Preparation - About your projector
About your projector
Remote control
13
1
2
3
4
5
6
7
8
9
10
11
12
1 Power <v/b> button
Turns the projector on or off. (v standby / b power on)
2 <COMPUTER 1> button
Switches the Computer 1 or Component (YC
signal to project.
BCR
3 <COMPUTER 2> button
Switches the Computer 2 signal to project.
4 <VIDEO> button
Switches the Video signal or S-video signal to project.
5 <MEMORY VIEWER/USB DISPLAY/NETWORK>
button
Switches the Memory Viewer signal, the USB Display
signal or the Network signal to project.
6 <ENTER> button/asqw buttons
Used to navigate through the menu screen.
7 <MENU> button
Open or close the On-Screen Menu. (x page 45)
8 <ASPECT> button
Switches the aspect ratio of the image.
9 <FREEZE> button
Pauses the projected image and mute the audio
temporarily. (x page 41)
10 <AV MUTE> button
Used to turn off the audio and video temporarily.
(x page 41)
11 <D.ZOOM +/-> buttons
Zoom in and out the images. (x page 41)
/YPBPR)
14
15
16
17
18
19
20
21
22
12 <VOLUME +/–> buttons
Adjusts the volume of the built-in speaker or audio
output. (x page 42)
13 Remote control signal emitter
14 <AUTO SETUP> button
Executes Input search, Auto PC adj. and Auto Keystone
correction at the same time. (x page 39)
15 <HDMI> button
Switches the HDMI signal to project.
16 <INFO.> button
Displays the [Info.] menu. (x page 74)
17 <KEYSTONE> button
Displays the [Keystone] menu. (x page 40)
18 <LAMP> button
Switches the settings of [Lamp control].
(Æ pages 41, 57)
19 <P-TIMER> button
Operate the P-timer function. (x page 41)
20 <IMAGE> button
Switches the image mode.
(x pages 42, 53)
21 <DAYLIGHT VIEW> button
Used to correct the image when the projector is used in a
bright surroundings.
(x pages 43, 55)
22 <MUTE> button
Used when temporarily turning off the audio.
(x page 42)
Attention
f Do not drop the remote control.
f Avoid contact with liquids.
f Do not attempt to modify or disassemble the remote control.
f Please observe the following contents that are described on
the back of the remote control unit (see the right picture).
1. Do not use a new battery together with an old battery.
2. Do not use unspecied batteries.
3. Make sure the polarities (+ and -) are correct when inserting the batteries.
f In addition, please read the contents that are related to batteries in the "Read this rst!".
20 - ENGLISH
1.Do not use old battery with new one.
2.Do not use batteries other than the
type specified.
3.Be sure the batteries are inserted properly.
Chapter 1 Preparation - About your projector
Note
f The remote control can be used within a distance of about 5 m (16'4-13/16") if pointed directly at the remote control signal
receiver. The remote control can control at angles of up to ± 30 ° vertically and ± 30 ° horizontally, but the effective control
range may be reduced.
f If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not
operate correctly.
f You can operate the projector by reecting the remote control signal on the screen. The operating range may differ due to
the loss of light caused by the properties of the screen.
f When the remote control signal receiver is lit with a uorescent light or other strong light source, the projector may become
inoperative. Set the projector as far from the luminous source as possible.
Projector body
Top Bottom
1 3
5
4
Side
7
Side
2
Front
8 9
Rear
6
6
10
Projection direction
11 12 13 14
WARNING
Keep your hands and other objects away from the air exhaust port.
f Keep your hand and face away.
f Do not insert your nger.
f Keep heat-sensitive articles away.
Heated air from the air exhaust port can cause burns, injury, or deformations.
1 Control Panel and Indicators (x page 22)
2 Lamp cover (x page 98)
The lamp unit is located inside.
3 Security Chain Hook
Attaches a burglar prevention cable, etc.
4 Focus ring (Front)
Adjust the focus.
3
5 Zoom ring (Back)
Adjust the zoom.
6 Adjustable foot
Adjust the projection angle.
7 Air intake port / Air lter cover (x page 95)
The air lter unit is inside.
8 Remote control signal receiver
ENGLISH - 21
1
2 3
4
5 6 7
8
9
10
11
12
Chapter 1 Preparation - About your projector
9 Projection Lens
10 Air exhaust port
11 <AC IN> terminal
Connect the supplied power cord.
12 Security slot
13 Rear terminals
14 Speaker
Attention
f Do not block the ventilation ports (intake and exhaust) of the projector.
Control panel and Indicators
1
2
3
4
1 Power indicator <ON(G)/STANDBY(R)>
Displays the status of the power.
2 Power <v/b> button
Turns the projector on/off. (v standby / b power on)
3 asqw buttons
Used to select the menu items in the menu operation.
4 <MENU> / q button
Displays the menu screen.
5 Warning indicator <WARNING>
6 <KEYSTONE> button
7 <INPUT/ENTER> / w button
This security slot is compatible with the Kensington
security cables.
5
6
7
Indicates the abnormal conditions of the projector.
Used to correct the keystone. (Æ page 40)
Displays the input source menu. (Æ pages 38, 49)
Used to execute <ENTER> button when the menu
screen appears.
Note
f The <INPUT/ENTER> button on the control panel is functioned as the <ENTER> button when the menu screen is displayed.
The operating procedure of menu screen is described as "Press the <ENTER> button" in this manual in order to unify the
control panel operation with the remote control operation.
Rear terminals
22 - ENGLISH
Chapter 1 Preparation - About your projector
1 <VARIABLE AUDIO OUT> terminal
This is the terminal to output the audio signal input to the
projector.
2 <VIDEO IN> terminal
This is the terminal to input video signals.
3 <COMPUTER 1 IN> terminal
This is the terminal to input RGB, Component (YCBCR/
YPBPR) or S-video signals.
4 <COMPUTER 2 IN> terminal
This is the terminal to input RGB signals.
5 <HDMI IN> terminal
This is the terminal to input HDMI signals.
6 <LAN> terminal
This is the LAN terminal to connect to the network.
7 <USB B (DISPLAY)> terminal
This terminal is used to connect the projector to the
computer with a USB cable when you want to use the
USB Display function.
8 <USB A (VIEWER/WIRELESS)> terminal
When using the Memory Viewer function, insert the USB
memory directly to this terminal. (x page 76 )
Please insert the wireless module (Model No.:
ET-WML100) directly to this terminal when using the
wireless LAN function. (x page 82 )
9 <AUDIO IN 1> terminal
This is the terminal to input computer audio signals.
10 <AUDIO IN 2 (L/R)> terminal
This is the terminal to input Video, S-video and YCBCR/
YPBPR audio signals.
There are a left (L) terminal and a right (R) terminal.
11 <SERIAL IN> terminal
This is the RS-232C compatible terminal to externally
control the projector by connecting a computer.
12 <MONITOR OUT> terminal
This is the terminal to output the RGB signals from
<COMPUTER 1 IN> terminal or <COMPUTER 2 IN>
terminal to external monitor.
This terminal will output the corresponding input signals
when switching to Computer 1 or Computer 2 input.
Attention
f When a LAN cable is directly connected to the projector, the network connection must be made indoors.
ENGLISH - 23
(ii)
Chapter 1 Preparation - Preparing the remote control
Preparing the remote control
Inserting and Removing batteries
(i)
Fig. 1
1) Open the cover. (Fig. 1)
2) Insert batteries and close the cover (Insert the "m" side first.). (Fig. 2)
f When removing the batteries, perform the steps in reverse order.
Fig. 2
When using the multiple projectors
When you use the system with multiple projectors, you can operate all the projectors simultaneously or each projector
individually using single remote control, if unique ID number is assigned to each projector.
When you want to set the ID number, at rst you need to set the ID number of the projector, and then set the ID number on the
remote control.
The factory default ID number of the unit (the projector and the remote control) is set to [ALL], you can control with this setting.
If necessary, please set the ID number to the remote control and the projector.
About how to set the ID number of the remote control, please refer to “Setting the remote control ID numbers”. (x page 43)
Note
f Set the ID number of the projector from the [Expand] menu → [Remote control]. (x page 70)
24 - ENGLISH
Chapter 2 Getting Started
This chapter describes things you need to do before using the projector such as the setup and
connections.
ENGLISH - 25
Chapter 2 Getting Started - Setting up
Setting up
Installation mode
There are four ways to set up the projector. Set the [Display] menu → [Project way] (x page 52) depending on the
installation location.
Mounting on the ceiling and projecting forward Setting on a desk/oor and projecting from rear
(Using the translucent screen)
Menu item Method Menu item Method
[Project way] [Ceiling/Front] [Project way] [Rear]
Mounting on the ceiling and projecting from rear
(Using the translucent screen)
Menu item Method Menu item Method
[Project way] [Ceiling/Rear] [Project way] [Front]
Setting on a desk/oor and projecting forward
Parts for ceiling mount (Optional)
This requires an optional ceiling mount bracket. Be sure to use the Projector Mount Bracket together with the ceiling mount
bracket for high ceilings or low ceilings.
Model No.:
f Use only the ceiling mount brackets specied for this projector.
f Refer to the Installation Instructions for the ceiling mount bracket when you install the bracket and the projector.
Attention
f To ensure projector performance and security, installation of the ceiling mount bracket must be carried out by your dealer or
a qualied technician.
ET-PKL100H (for high ceilings), ET-PKL100S (for low ceilings), ET-PKL420B (Projector Mount Bracket)
26 - ENGLISH
Chapter 2 Getting Started - Setting up
Screen size and throw distance
Refer to the screen size and projection distances to install the projector. Image size and image position can be adjusted in
accordance with the screen size and screen position.
Projected image
SD
SH
SW
L (LW/LT) *
1
SH Image height (m)
SW Image width (m)
H Distance from the center of lens to the image lower end (m)
SD Projected image size (m)
Projection distance (m)
SH
SW
Screen
H
Screen
*1 LW : Minimum distance
LT : Maximum distance
Attention
f Before installing, please read “Precautions for use” (x page 14).
L (LW/LT)
L (LW/LT)
Projection distance
For PT-LW362
All measurements below are approximate and may differ slightly from the actual measurements. (Unit: m)
Projection
size
Screen
diagonal
Minimum
distance
(SD)
0.76 (30") 1.1 1.3 0.065 1.0 1.2 0.008 0.9 1.1 0.027
1.02 (40") 1.4 1.7 0.087 1.3 1.6 0.011 1.3 1.5 0.036
1.27 (50") 1.8 2.2 0.109 1.6 2.0 0.014 1.6 1.9 0.046
1.52 (60") 2.2 2.6 0.131 2.0 2.4 0.017 1.9 2.3 0.055
1.78 (70") 2.5 3.0 0.152 2.3 2.8 0.019 2.2 2.7 0.063
2.03 (80") 2.9 3.5 0.174 2.6 3.2 0.022 2.6 3.1 0.072
2.29 (90") 3.3 3.9 0.196 3.0 3.6 0.025 2.9 3.5 0.082
2.54 (100") 3.6 4.4 0.218 3.3 4.0 0.028 3.2 3.8 0.091
3.05 (120") 4.4 5.2 0.261 4.0 4.8 0.033 3.8 4.6 0.109
3.81 (150") 5.4 6.6 0.327 4.9 5.9 0.041 4.8 5.8 0.137
5.08 (200") 7.3 8.7 0.435 6.6 7.9 0.054 6.4 7.7 0.181
6.35 (250") 9.1 10.9 0.544 8.3 9.9 0.068 8.0 9.7 0.227
7.62 (300") 10.9 13.1 0.653 9.9 11.9 0.082 9.6 11.6 0.272
4:3 aspect ratio 16:9 aspect ratio 16:10 aspect ratio
(LW)
Maximum
distance
(LT)
Height
position
(H)
Minimum
distance
(LW)
Maximum
distance
(LT)
Height
position (H)
Minimum
distance
(LW)
Maximum
distance
(LT)
Height
position (H)
ENGLISH - 27
Chapter 2 Getting Started - Setting up
For PT-LW312
All measurements below are approximate and may differ slightly from the actual measurements. (Unit: m)
Projection
size
Screen
diagonal
(SD)
0.76 (30") 1.1 1.3 0.065 1.0 1.2 0.008 0.9 1.1 0.027
1.02 (40") 1.4 1.7 0.087 1.3 1.6 0.011 1.3 1.5 0.036
1.27 (50") 1.8 2.2 0.109 1.6 2.0 0.014 1.6 1.9 0.046
1.52 (60") 2.2 2.6 0.131 2.0 2.4 0.017 1.9 2.3 0.055
1.78 (70") 2.5 3.0 0.152 2.3 2.8 0.019 2.2 2.7 0.063
2.03 (80") 2.9 3.5 0.174 2.6 3.1 0.022 2.5 3.1 0.072
2.29 (90") 3.3 3.9 0.196 3.0 3.5 0.025 2.9 3.5 0.082
2.54 (100") 3.6 4.3 0.218 3.3 3.9 0.028 3.2 3.8 0.091
3.05 (120") 4.3 5.2 0.261 3.9 4.7 0.033 3.8 4.6 0.109
3.81 (150") 5.4 6.5 0.327 4.9 5.9 0.041 4.8 5.8 0.137
5.08 (200") 7.3 8.7 0.435 6.6 7.9 0.054 6.4 7.7 0.181
6.35 (250") 9.1 10.9 0.544 8.2 9.9 0.068 8.0 9.6 0.227
7.62 (300") 10.9 13.1 0.653 9.9 11.9 0.082 9.6 11.6 0.272
Minimum
distance
4:3 aspect ratio 16:9 aspect ratio 16:10 aspect ratio
(LW)
Maximum
distance
(LT)
Height
position
(H)
Minimum
distance
(LW)
Maximum
distance
(LT)
Height
position (H)
Minimum
distance
(LW)
Maximum
distance
(LT)
Height
position (H)
For PT-LB412, PT-LB382 and PT-LB332
All measurements below are approximate and may differ slightly from the actual measurements. (Unit: m)
Projection size 4:3 aspect ratio 16:9 aspect ratio
Minimum
Screen diagonal (SD)
0.76 (30") 0.9 1.1 0.065 1.0 1.2 0.008
1.02 (40") 1.2 1.4 0.087 1.3 1.6 0.011
1.27 (50") 1.5 1.8 0.109 1.6 2.0 0.014
1.52 (60") 1.8 2.2 0.131 2.0 2.4 0.017
1.78 (70") 2.1 2.5 0.152 2.3 2.8 0.019
2.03 (80") 2.4 2.9 0.174 2.6 3.2 0.022
2.29 (90") 2.7 3.3 0.196 3.0 3.6 0.025
2.54 (100") 3.0 3.6 0.218 3.3 4.0 0.028
3.05 (120") 3.6 4.4 0.261 4.0 4.8 0.033
3.81 (150") 4.5 5.5 0.327 4.9 5.9 0.041
5.08 (200") 6.1 7.3 0.435 6.6 7.9 0.054
6.35 (250") 7.6 9.1 0.544 8.3 9.9 0.068
7.62 (300") 9.1 10.9 0.653 9.9 11.9 0.082
distance
(LW)
Maximum
distance
(LT)
Height position (H)
Minimum
distance
(LW)
Maximum
distance
(LT)
Height position (H)
28 - ENGLISH
Chapter 2 Getting Started - Setting up
Projection distance formulas
To use a screen size not listed in this manual, check the screen size SD (m) and use the respective formula to calculate
projection distance.
The unit of all the formulae is m. (Values obtained by the following calculation formulae contain a slight error.)
If you want to calculate the projection distance with projected image size SD (unit: inch) by substituting, please assign 0.0254
times to the SD value.
For PT-LW362
4:3 aspect ratio 16:9 aspect ratio 16:10 aspect ratio
Screen height (SH)
Screen width (SW)
Minimum distance (LW)
Maximum distance (LT)
For PT-LW312
Screen height (SH)
Screen width (SW)
Minimum distance (LW)
Maximum distance (LT)
= 0.6 × SD = 0.490 × SD = 0.530 × SD
= 0.8 × SD = 0.872 × SD = 0.848 × SD
= 1.4369 × SD - 0.025 = 1.3045 × SD - 0.025 = 1.2692 × SD - 0.025
= 1.7263 × SD - 0.025 = 1.5673 × SD - 0.025 = 1.5249 × SD - 0.025
4:3 aspect ratio 16:9 aspect ratio 16:10 aspect ratio
= 0.6 × SD = 0.490 × SD = 0.530 × SD
= 0.8 × SD = 0.872 × SD = 0.848 × SD
= 1.4332 × SD - 0.02327 = 1.3008 × SD - 0.02327 = 1.2660 × SD - 0.02327
= 1.7202 × SD - 0.02367 = 1.5615 × SD - 0.02367 = 1.5195 × SD - 0.02367
For PT-LB412, PT-LB382 and PT-LB332
4:3 aspect ratio 16:9 aspect ratio
Screen height (SH)
Screen width (SW)
Minimum distance (LW)
Maximum distance (LT)
= 0.6 × SD = 0.490 × SD
= 0.8 × SD = 0.872 × SD
= 1.1974 × SD - 0.025 = 1.3045 × SD - 0.025
= 1.4386 × SD - 0.025 = 1.5673 × SD - 0.025
ENGLISH - 29
Chapter 2 Getting Started - Setting up
Adjusting adjustable foot
Lift the front of the projector and press the foot lock latch with your nger to adjust the projection angle up and down. Release
your nger to lock the adjustable foot.
For slight adjustment, rotate the adjustable foot.
Rotate the adjustable foot to extend it as shown in the gure, and rotate it in the opposite direction to contract it.
Foot lock latch
Adjustable range
Adjustable foot : 40 mm (1-9/16")
Attention
f Heated air comes out of the air exhaust port while the lamp is lit. Do not touch the air exhaust port directly when you adjust
the adjustable foot.
f If keystone distortion occurs on the projected image, perform [Keystone] from the [Expand] menu. (x page 62)
30 - ENGLISH
Loading...