Panasonic PT-LX30H, PT-LX26H, PT-LW25H Product Sheet

PT-LW25H Series

LCD Proje ctors

PT-LW25H
PT-LX30H
PT-LX26H
PT-LX26
PT-LX22

Light, Bright, High-Contrast
Portable Projectors

PT-LW25H

2,500 lm 3,000 : 1 WXGA

Wired LAN Speaker

PT-LX30H

3,000 lm 2,500 : 1 XGA

Wired LAN Speaker

PT-LX26H

2,600 lm 2,500 : 1 XGA

Wired LAN Speaker

PT-LX26

2,600 lm 500 : 1 XGA

PT-LX22

2,200 lm 500 : 1 XGA

Superb Functions
in a Lightweight Body

• Up to 3,000 lm of brightness in a compact
body, weighing 2.99 kg or less

• High contrast ratio up to 3,000:1 with
variable iris

• A maximum 4,000-hour
cycle and 4,000-hour
cycle

• Quiet 29-dB design does not interrupt
meetings or classes

• Low standby power consumption of 0.47 W

(standby mode: Eco)

*1

for sharp images

*2

*3

air fi lter replacement

(lamp p ower: Eco)

lamp replacement

Simple Setup and
Easy Operation

• Real-Time Keystone Correction
automatically corrects vertical image
distortion

• The Auto Setup function enables Auto Input
Signal Search and Guidance functions for
easy projector operation

• Complete with basic terminals, two
computer input

• Easy remote monitoring and control over a
LAN with Multi Projector Monitoring and
Control Software, PJLink™(class1), web
browser

(PT-LW25H/LX30H/LX26H)

(PT-LW25H/LX30H/LX26H)

* Feature d Image: PT-LW25H

Convenient Functions for
a Variety of Applications

• 1 W speaker enables audio playback
directly from the projector

(PT-LW25H/LX30H/LX26H)

• Presentation support/control tools such as
Presentation Timer, Freeze Function, and
Digital Zoom

• Color-board and Blackboard modes adjust
the colors to provide high quality projection
possible in rooms that don’t have a screen

• Direct Power Off right after use

• Effective theft prevention with the startup logo

• Projector identifi cation system for remote
control allocation of up to six projectors

• Built-in closed caption decoder

*1 Variabl e iris: for the P T-LW25H/LX30H/LX 26H only. *2 This is the maxi mum value when the la mp power is s et to Eco, with th e lamp tur ned on for 2 ho urs and of f for 0.25 hour s. Increa ses in the l amp on
cycle or ex tended u se with the l amp continuousl y turned o n will shor ten the lamp repl acement cycle. Whe n the lamp p ower is set to High or Normal, the lam p replac ement cyc le is up to 3,00 0 hours. T he usage
enviro nment af fects the l amp repl acemen t cycle. *3 With the lamp power set to Eco. Th e usage environme nt affects the dura tion of the fi lter.

Specifications

Model PT-LW25H PT-LX30H PT-LX26H PT-LX26 PT-LX22

Power supply

Power consumption

Panel size

LCD panel

Display method

Pixels

Lens
Lamp
Screen size (diagonal)
Brightness*³
Center-to-corner uniformity*³

Contrast*³

Resolution

RGB (analog)

Scanning
frequency

Optical axis shift
Keystone correction range
Installation

Terminals

Built-in speaker
Noise level
Cabinet materials
Dimensions (W × H × D)
Weight
Operating environment

Supplied accessories

*1 When Standby mode is set to Eco, network functions such as standby on via LAN are not available. Also, only certain commands can be received for external control using the serial terminal. *2 The values given for the recommended lamp replacement cycles
are maximum. The usage environment affects the lamp replacement cycle. *3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *4 Input signals that exceed this resolution will be converted to 1,280 x
800 pixels. *5 Input signals that exceed this resolution will be converted to 1,024 x 768 pixels. *6 Power cords available (x 2) for the PT-LW25HEA/LX30HEA/LX26HEA/LX26EA/LX22EA.

BPR

YP

(YCBCR)

VIDEO/S-VIDEO

COMPUTER IN 1/
S-VIDEO IN

COMPUTER IN 2/
MONITOR OUT

VIDEO IN
AUDIO IN

COMPUTER
AUDIO IN

SERIAL IN
LAN

15 mm (0.59 inches) diagonal

(16:10 aspect ratio)

1,024,000 (1,280 × 800) x 3,

total of 3,072,000 pixels

2,500 lm (lamp power: High) 3,000 lm (lamp power: High) 2,600 lm (lamp power: High) 2,200 lm (lamp power: High)

(full on/full off, lamp power: High, Iris: on)

1,280 × 800 pixels

Dimensions Optional accessories

297 W (0.47 W in Eco standby mode

16 mm (0.63 inches) diagonal

3,000:1

*4

H: 15–100 kHz, fV: 50–100 Hz, dot clock: 140 MHz or lower (Signals exceeding the dot clock rate of 140 MHz are downsampled.)

fH: 15.75 kHz, fV: 60 Hz [480i(525i)] fH: 15.63 kHz, fV: 50 Hz [576i(625i)] fH: 31.50 kHz, fV: 60 Hz [480p(525p)] fH: 31.25 kHz, fV: 50 Hz [576p(625p)]
fH: 45.00 kHz, fV: 60 Hz [720(750)/60p] fH: 37.50 kHz, fV: 50 Hz [720(750)/50p] fH: 33.75 kHz, fV: 60 Hz [1080(1125)/60i] fH: 28.13 kHz, fV: 50 Hz [1080(1125)/50i]

13:1 6:1

D-sub HD 15-pin (female) x 1 (RGB×1), (input/output selectable using on-screen menu)

RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (class 1)) —

Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software) Software CD-ROM (Logo Transfer Software)

f

(When Monitor Out is selected, the COMPUTER IN 1 signal is output.)

RCA pin x 2 (L-R x 1) for VIDEO input —

3.2 cm round shape × 1, output power: 1 W (monaural) —

Approximately 2.99 kg (6.59 lbs) Approximately 2.90 kg (6.39 lbs)

Power cord x 1

unit: mm (inch)

Replacement lamp unit

ET-LAL100

*1

, 8.6 W in Network standby mode.)

(4:3 aspect ratio)

230 W × 1, lamp replacement cycle (lamp power: High, Normal/Eco): 3,000 hours/4,000 hours

f

H: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]

(The D-Sub/S-VIDEO conversion cable ET-ADSV is required for inputting S-VIDEO signals.)

M3 × 1 (L-R x 1) —

349 x 105 x 247 mm (13.7” x 4.1” x 9.7”) (with legs at shortest position, not including protruding parts)

Operating temperature: 5°C–35°C (41°F–95°F), operating humidity: 20%-80% (no condensation)

1.2x manual zoom, manual focus, F 2.10–2.25, f 19.11-22.94 mm

(full on/full off, lamp power: High, Iris: on)

D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR/S-VIDEO x 1)

D-sub 9-pin (male) × 1 for external control (RS-232C compliant)

37.0 dB (lamp power: High), 34.1 dB (lamp power: Normal), 29.0 dB (lamp power: Eco)

*6

, wireless remote control unit, batteries (AAA/R03/LR03 type × 2), VGA cable x 1, filter cover

Replacement filter unit

ET-RFL100

100-240 V AC, 50/60 Hz

Transparent LCD panel (x 3, R/G/B)

786,432 (1,024 × 768) x 3, total of 2,359,296 pixels

0.76–7.62 m (30–300 inch)

2,500:1

Vertical: ±30° (±20° when Auto Keystone)

RCA pin × 1 (Composite VIDEO)

85%

Ceiling/floor, front/rear

Molded plastic

Ceiling mount
bracket for
high ceilings*⁷

ET-PKV100H

1,024 × 768 pixels

297 W (0.47 W in Eco standby mode*1,

8.6 W in Serial standby mode.)

14 mm (0.55 inches) diagonal (4:3 aspect ratio)

*2

500:1

—

Bracket assembly

ET-PKL100B

*5

Ceiling mount bracket
for low ceilings*⁷

ET-PKV100S

(full on/full off, lamp power: High)

287 W (0.47 W in Eco standby mode*1,

7.1 W in Serial standby mode.)

D-Sub/S-VIDEO
conversion cable

ET-ADSV

*7 This product is used together with an optional bracket assembly (sold separately).

Projection distance

unit: meters (feet)

PT-LW25H

(16:10 aspect ratio; throw ratio: 1.5–1.8:1)

Diagonal

image size

Projection distance (L)

min.(wide) max.(tele)

Height f rom the
edge of screen to
cente r of lens ( H)

0.76 [30"] 0.9 (3.1) 1.1 (3.7) 0.03 (0.09)

1.02 [40"] 1.3 (4.1) 1.5 (5.0) 0.04 (0.13)

1.27 [50"] 1.6 (5.2) 1.9 (6.3) 0.05 (0.16)

1.52 [60"] 1.9 (6.3) 2.3 (7.5) 0.06 (0.19)

1.78 [70"] 2.2 (7.3) 2.7 (8.8) 0.07 (0.22)

2.03 [80"] 2.6 (8.4) 3.1 (10.1) 0.08 (0.25)

2.29 [90"] 2.9 (9.4) 3.5 (11.3) 0.09 (0.28)

2.54 [100"] 3.2 (10.5) 3.8 (12.6) 0.10 (0.32)

3.05 [120"] 3.8 (12.6) 4.6 (15.1) 0.12 (0.38)

3.81 [150"] 4.8 (15.8) 5.8 (18.9) 0 .14 (0.47)

5.08 [2 00"] 6 .4 (21.1) 7.7 (25.3) 0.19 (0.63)

6.35 [250"] 8.0 (26.3) 9.6 (31.6) 0.24 (0.79)

7.62 [300"] 9.6 (31.6) 11.0 (3 6.1)

*8 There is no guarantee of the lens performance when the projection distance exceeds 11.0 m (36.1 feet).

*8

0.29 (0.95)

PT-LX30H

(4:3 aspect ratio; throw ratio: 1.5–1.8:1)

Diagonal

image size

Projection distance (L)

min.(wide) max.(tele)

0.76 [30"] 0.9 (2.9) 1.1 (3.5) 0.07 (0.21)

1.02 [40"] 1. 2 (3.9) 1.4 (4.7) 0. 09 (0.29)

1.27 [5 0"] 1.5 (4.9) 1.8 (5.9) 0.11 (0.36)

1.5 2 [60"] 1. 8 (5.9) 2. 2 (7.1) 0.13 (0.4 3)

1.78 [70"] 2.1 (6.9) 2.5 (8.3) 0.15 (0.50)

2.03 [80"] 2.4 (7.9) 2.9 (9.5) 0.17 (0.57)

2.29 [90"] 2.7 (8.9) 3.3 (10.7) 0.20 (0.64)

2.54 [100"] 3.0 (9.9) 3.6 (11.9) 0.22 (0.71)

3.05 [120"] 3.6 (11.9) 4.3 (14.3) 0.26 (0.86)

3.81 [150"] 4 .5 (14.8) 5 .4 (17.8) 0.33 (1.0 7)

5.08 [2 00"] 6 .0 (19.8) 7.3 (23. 8) 0. 44 (1.4 3)

6.35 [2 50"] 7.6 (2 4.8) 9.1 (29.8) 0.5 4 (1.79)

7.62 [ 300 "] 9.1 (2 9.7) 10.9 (35 .7) 0. 65 (2.14)

Caution

Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fi re, malfunction or electric shock.

NOTE ON USE

1 The projector uses a high-voltage mercury lamp under high internal pressure. This lamp may break, emitting a popping
sound, or fail to illuminate, due to impact or extended use.
2 The high-wattage lamp becomes very hot during operation. Please observe the following precautions:

• Never place objects on top of the projector while it is in operation.

• Make sure there is an unobstructed space of 1,000 mm (39-3/8 in) or more around the projector’s exhaust openings.

• If stacking projector units, care must be taken to provide the recommended space between units. These space
requirements also apply to installation where only one projector unit is operating at one time and the other unit is used as
a backup.

Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Product availability differs depending on region and country. This product may be subject to export control regulations.
The projection distances and throw ratios given in this brochure are for use only as guidelines. For more detailed information,
please consult the dealer from whom you are purchasing the product. The PJLink trademark is an application trademark in Japan,
the United States, and other countries and regions or registered trademarks. All other trademarks are the property of
their respective trademark owners.
© 2011 Panasonic Corporation. All rights reserved.

• If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must match the
operating temperature listed in the specifi cations table during use. Also, make sure the projector’s intake and exhaust
openings are not blocked. Ensure there is suffi cient ventilation to prevent hot air from the exhaust openings being
recirculated into the intake opening.
3 The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.

• The lamp replacement cycle varies greatly depending on individual lamp characteristics and usage conditions.

• The brightness of the lamp will gradually decrease with use.
4 Due to natural characteristics of lamps, screen brightness may fl uctuate. This is not an indication of faulty lamp performance.

PT-LX26H/LX26/LX22

(4:3 aspect ratio; throw ratio: 1.7–2.0:1)

Height f rom the
edge of screen to
cente r of lens ( H)

Diagonal

image size

Projection distance (L)

min.(wide) max.(tele)

Height f rom the
edge of screen to
cente r of lens ( H)

0.76 [30"] 1.0 (3.3) 1.2 (4.0) 0.07 (0.21)

1.02 [40"] 1.4 (4.5) 1.6 (5.4) 0.09 (0.29)

1.27 [50"] 1.7 (5.6) 2.0 (6.7) 0.11 (0.36)

1.52 [60"] 2.0 (6.7) 2.5 (8.1) 0.13 (0.43)

1.78 [70"] 2.4 (7.8) 2.9 (9.4) 0.15 (0.50)

2.03 [80"] 2.7 (9.0) 3.3 (10.8) 0.17 (0.57)

2.29 [90"] 3.1 (10.1) 3.7 (12.1) 0.20 (0.6 4)

2.54 [100 "] 3.4 (11.2) 4.1 (13.5) 0.22 (0.71)

3.05 [120"] 4.1 (13.5) 4.9 (16.2) 0.26 (0.86)

3.81 [150"] 5.2 (16.9) 6.2 (20.3) 0.33 (1.07)

5.08 [2 00"] 6 .9 (22.6) 8.3 (27.1) 0. 44 (1.4 3)

6.35 [250"] 8.6 (28.2) 10.3 (33.9) 0.54 (1.79)

7.62 [300 "] 10.3 (33.9) 11.0 (36.1)

*8

0.65 (2.14)

For more information about Panasonic projectors

http://panasonic.net/avc/projector

All information included here is valid as of November 2011.

PT-LW25HG1 Printed in Japan.