Panasonic PT-FW530U, PT-FZ570U, PT-FX500U User Manual
Operating Instructions
Functional Manual
LCD Projector
Model No.
Commercial Use
PT-FZ570
PT-FW530
PT-FX500
Thank you for purchasing this Panasonic product.
This manual is intended for products manufactured from Aug. 2016 and beyond.
■
■ This manual is common to all the models regardless of sufxes of the Model No.
f for India
PT-FZ570D / PT-FW530D / PT-FX500D
f for other countries or regions
PT-FZ570 / PT-FW530 / PT-FX500
■ Before operating this product, please read the instructions carefully and save this manual
for future use.
■ Before using this product, be sure to read “Read this rst!” (x pages 4 to 13).
ENGLISH
TQBJ0956-2
Contents
Contents
Read this rst! ............................................4
Chapter 1 Preparation
Precautions for use ................................................. 17
Lens cushion ....................................................... 17
Cautions when transporting .................................. 17
Cautions when installing ....................................... 17
Security ................................................................19
DIGITAL LINK ....................................................... 19
Notes on Using Wireless Connection ................... 19
Early Warning Software ........................................ 21
Cautions on use ................................................... 22
Disposal ................................................................ 22
Accessories .......................................................... 23
Optional accessories ............................................ 24
About your projector ............................................... 25
Remote control ..................................................... 25
Projector body ...................................................... 26
Preparing the remote control ................................. 29
Inserting and removing the batteries .................... 29
When using the system with multiple projectors .. 29
Chapter 2 Getting Started
Setting up ................................................................. 31
Installation mode .................................................. 31
Parts for ceiling mount (optional) .......................... 32
Projected image and throw distance .................... 32
Adjusting adjustable feet ...................................... 35
Connecting ............................................................... 36
Before connecting ................................................ 36
Connecting example: AV equipment ....................37
Connecting example: Computers ......................... 38
Connecting example using DIGITAL LINK ...........38
Chapter 3 Basic Operations
Switching on/off the projector ................................ 41
Connecting the power cord .................................. 41
Power indicator ..................................................... 41
Switching on the projector .................................... 42
When the initial setting screen is displayed .......... 42
Making adjustments and selections ..................... 44
Switching off the projector .................................... 45
Direct power off function ....................................... 46
Projecting ................................................................. 47
Selecting the input signal ..................................... 47
Adjusting the image .............................................. 48
Adjustment range by the lens position shift
(optical axis shift) ............................................... 49
Operating with the remote control ......................... 50
Using the AV mute function ..................................50
Using the mute function ........................................ 50
Adjusting the volume ............................................ 50
Using the freeze function ...................................... 51
Using the on-screen display function ................... 51
Using the automatic setup function ...................... 51
Using the SCREEN ADJ button ............................ 52
Switching the aspect ratio of the image ................ 52
Using the digital zoom function ............................ 52
Using the presentation timer function ................... 53
Using the FUNCTION button ................................ 54
Displaying internal test patterns ........................... 54
Using the status function ...................................... 54
Using the ECO management function .................. 55
Setting the ID number of the remote control ........ 55
Chapter 4 Settings
Menu navigation ...................................................... 57
Navigating through the menu ............................... 57
Main menu ............................................................ 58
Sub-menu ............................................................. 58
[PICTURE] menu ...................................................... 61
[PICTURE MODE] ................................................ 61
[CONTRAST] ........................................................61
[BRIGHTNESS] .................................................... 61
[COLOR] ...............................................................62
[TINT] ...................................................................62
[SHARPNESS] ..................................................... 62
[COLOR TEMPERATURE] ................................... 62
[GAMMA] .............................................................. 63
[IRIS] ....................................................................63
[ADVANCED MENU] ............................................ 63
[DAYLIGHT VIEW] ................................................64
[DIGITAL CINEMA REALITY] ............................... 64
[NOISE REDUCTION] .......................................... 64
[TV-SYSTEM] .......................................................65
[RGB/YP
[POSITION] menu ................................................... 66
[REALTIME KEYSTONE] .....................................66
[SCREEN ADJUSTMENT]
[SCREEN ADJUSTMENT] (For PT-FW530
and PT-FX500) ...........................................................70
[SHIFT] ................................................................. 72
[DOT CLOCK].......................................................72
[CLOCK PHASE] .................................................. 73
[OVER SCAN] ...................................................... 73
[ASPECT] ............................................................. 73
[FRAME LOCK] .................................................... 74
[CLAMP POSITION] ............................................. 74
]/[RGB/YCBCR] .................................. 65
BPR
(For PT-FZ570) ..............66
2 - ENGLISH
Contents
[LANGUAGE] menu ................................................. 75
Changing the display language ............................ 75
[DISPLAY OPTION] menu ........................................ 76
[ON-SCREEN DISPLAY] ...................................... 76
[COMPUTER IN/OUT] .......................................... 77
[HDMI IN] ..............................................................78
[DIGITAL LINK IN] ................................................79
[CLOSED CAPTION SETTING]
480i YC
[SCREEN SETTING] ............................................ 81
[STARTUP LOGO] ................................................ 82
[AUTO SETUP SETTING] .................................... 82
[SIGNAL SEARCH] ..............................................83
[STARTUP INPUT SELECT] ................................83
[BACK COLOR] .................................................... 83
[WIDE MODE] ......................................................84
[SXGA MODE] ......................................................84
[P-TIMER] .............................................................84
[OTHER FUNCTIONS] ......................................... 85
[PROJECTOR SETUP] menu .................................. 87
[STATUS] .............................................................. 87
[PROJECTOR ID] ................................................. 87
[INITIAL START UP] ............................................. 87
[PROJECTION METHOD] .................................... 88
[LAMP POWER] ................................................... 88
[ECO MANAGEMENT] ......................................... 88
[RS-232C] .............................................................90
[FUNCTION BUTTON] ........................................ 91
[AUDIO SETTING] ............................................... 91
[TEST PATTERN] ................................................. 93
[FILTER COUNTER].............................................94
[SCHEDULE] ........................................................ 94
[DATE AND TIME] ................................................96
[INITIALIZE ALL] ..................................................97
[SECURITY] menu ................................................... 98
[PASSWORD] ....................................................... 98
[PASSWORD CHANGE] ......................................98
[DISPLAY SETTING] ............................................ 98
[TEXT CHANGE] .................................................. 99
[MENU LOCK] ...................................................... 99
[MENU LOCK PASSWORD] ................................99
[CONTROL DEVICE SETUP] ...............................99
[NETWORK] menu ................................................. 101
[DIGITAL LINK MODE] ....................................... 101
[DIGITAL LINK STATUS] ....................................101
[DIGITAL LINK MENU] .......................................102
[WIRED LAN] ..................................................... 102
[PROJECTOR NAME] ........................................ 102
[NETWORK CONTROL] .................................... 103
[NETWROK STATUS] ........................................103
[INITIALIZE] ........................................................104
input) .......................................................81
BCR
(Only for NTSC,
Chapter 5 Operation of Function
Network connections ............................................ 106
When connecting via wired LAN ........................ 106
When connecting via wireless LAN .................... 108
About Presenter Light ........................................... 110
About VueMagic .................................................... 112
Web control function ............................................. 113
Accessing from the web browser ....................... 113
Chapter 6 Maintenance
Lamp/temperature/lter indicators ...................... 130
When an indicator lights up ................................ 130
Maintenance/replacement..................................... 132
Before performing maintenance/replacement .... 132
Maintenance ....................................................... 132
Replacing the unit ............................................... 135
Troubleshooting .................................................... 138
Chapter 7 Appendix
Technical information ........................................... 141
PJLink protocol ................................................... 141
Control commands via LAN ................................ 142
<SERIAL IN> terminal ........................................145
[MENU LOCK PASSWORD] operations ............ 148
List of compatible signals ................................... 149
Specications ........................................................ 151
Dimensions ............................................................ 153
Precautions for Attaching Ceiling
Mount Bracket .................................................. 154
Index ....................................................................... 155
ENGLISH - 3
Read this rst!
Read this rst!
WARNING: THIS APPARATUS MUST BE EARTHED.
WARNING: To prevent damage which may result in re or shock hazard, do not expose this appliance to rain
or moisture.
This device is not intended for use in the direct eld of view at visual display workplaces. To avoid
incommoding reexions at visual display workplaces this device must not be placed in the direct
eld of view.
The equipment is not intended for used at a video workstation in compliance BildscharbV.
The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.
WARNING:
1. Remove the plug from the mains socket when this unit is not in use for a prolonged period of time.
2. To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualied
service personnel.
3. Do not remove the earthing pin on the mains plug. This apparatus is equipped with a three prong earthing-
type mains plug. This plug will only t an earthing-type mains socket. This is a safety feature. If you are
unable to insert the plug into the mains socket, contact an electrician. Do not defeat the purpose of the
earthing plug.
WARNING:
This equipment is compliant with Class A of CISPR32.
In a residential environment this equipment may cause radio interference.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
WARNING: RISK OF ELECTRIC SHOCK. DON’T OPEN
AVERTISSEMENT:RISQUEDECHOCÉLECTRIQUE.NEPASOUVRIR.
WARNUNG:ZURVERMEIDUNGEINESELEKTRISCHENSCHLAGESGERÄTNICHTÖFFNEN.
ПРЕДУПРЕЖДЕНИЕ:ОПАСНОСТЬ ПОРАЖЕНИЯ ЭЛЕКТРИЧЕСКИМ ТОКОМ. НЕ ОТКРЫВАТЬ.
경고:감전 위험이 있으므로 열지마십시오.
Indicated on the projector
The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the
o
7
user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may
be of sufcient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
product.
WARNING:
CAUTION: To assure continued compliance, follow the attached installation instructions. This includes using
TURN THE POWER OFF AND DISCONNECT THE POWER PLUG FROM THE WALL OUTLET
BEFORE REPLACING THE LAMP UNIT.
the provided power cord and shielded interface cables when connecting to computer or peripheral
devices. Also, any unauthorized changes or modications to this equipment could void the user’s
authority to operate this device.
4 - ENGLISH
Read this rst!
This is a device to project images onto a screen, etc., and is not intended for use as indoor lighting in a domestic environment.
Directive 2009/125/EC
Importer's name and address within the European Union
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 11, 22525 Hamburg, Germany
CAUTION (North/Middle/South America)
Power Supply: This Projector is designed to operate on 100 V - 240 V, 50 Hz/60 Hz AC, house current only.
CAUTION: The AC power cord which is supplied with the projector as an accessory can only be used for
power supplies up to 125 V. If you need to use higher voltages than this, you will need to obtain a
separate 250 V power cord. If you use the accessory cord in such situations, re may result.
CAUTION (North/Middle/South America)
This equipment is equipped with a three-pin grounding-type power plug. Do not
remove the grounding pin on the power plug. This plug will only t a grounding-type
power outlet. This is a safety feature. If you are unable to insert the plug into the
outlet, contact an electrician. Do not defeat the purpose of the grounding plug.
Do not remove
WARNING (USA and Canada)
fNot for use in a computer room as dened in the Standard for the Protection of Electronic Computer/Data
Processing Equipment, ANSI/NFPA 75.
fFor permanently connected equipment, a readily accessible disconnect device shall be incorporated in the
building installation wiring.
fFor pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.
NOTICE USA only:
fThis product has a High Intensity Discharge (HID) lamp that contains mercury. Disposal may be regulated
in your community due to environmental considerations. For disposal or recycling information, please visit
Panasonic website: http://www.panasonic.com/environmental or call 1-888-769-0149.
For USA-California Only
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling
may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
NOTIFICATION (Canada)
This class A digital apparatus complies with Canadian ICES-003.
Contains mercury/Contenu avec mercure
For more information on safe handling
procedures, the measures to be taken in
case of accidental breakage and safe
disposal options visit:
ec.gc.ca/mercure-mercury/.
Dispose of or recycle in accordance with
applicable laws.
Pour plus de renseignements sur les
procédures de manutention sécuritaire, les
mesures à prendre en cas de bris accidentel et
les options d’élimination sécuritaire visitez:
ec.gc.ca/mercure-mercury/.
Mettez au rebut ou recyclez conformément
aux lois applicables.
ENGLISH - 5
Read this rst!
FCC NOTICE (USA)
Verication
Model Number: PT-FZ570 / PT-FW530 / PT-FX500
Trade Name: Panasonic
Responsible Party: Panasonic Corporation of North America
Address: Two Riverfront Plaza, Newark, NJ 07102-5490
General Contact: http://www.panasonic.com/support
Projector Contact: http://panasonic.net/avc/projector/
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Warning:
To assure continued compliance, follow the attached installation instructions. This includes using the provided
power cord and shielded interface cables when connecting to computer or peripheral devices. Also, any unau-
thorized changes or modications to this equipment could void the user’s authority to operate this device.
6 - ENGLISH
Read this rst!
IMPORTANT: THE MOULDED PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse
is tted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating
of 13 amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
If the plug contains a removable fuse cover, you must ensure that it is retted when the fuse is replaced. If you
lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover
can be purchased from an Authorised Service Center.
If the tted moulded plug is unsuitable for the mains socket in your home, then the fuse should be
removed and the plug cut off and disposed of safely. There is a danger of severe electrical shock if the
cut off plug is inserted into any 13 amp socket.
If a new plug is to be tted, please observe the wiring code as shown below.
If in any doubt, please consult a qualied electrician.
WARNING: THIS APPLIANCE MUST BE EARTHED.
IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows.
The wire which is coloured GREEN - AND - YELLOW must be connected to the terminal in the
plug which is marked with the letter E or by the Earth symbol
AND - YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the plug which is marked
with the letter N or coloured BLACK.
or the BSI mark on the body of the fuse.
Green - and - Yellow: Earth
Blue: Neutral
Brown: Live
or coloured GREEN or GREEN -
The wire which is coloured BROWN must be connected to the terminal in the plug which is marked
with the letter L or coloured RED.
How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.
ENGLISH - 7
To remove the battery
Remote Control Battery
Read this rst!
1. Press the guide and lift the cover.
ii)
i)
2. Remove the batteries.
Brazil Only
Brasil Apenas
rManuseio de baterias usadas
BRASIL
Após o uso, as pilhas e/ou baterias deverão
ser entregues ao estabelecimento comercial
ou rede de assistência técnica autorizada.
Cobrir os terminais positivo (+) e negativo (-) com uma ta isolante adesiva, antes de depositar numa caixa
destinada para o recolhimento. O contato entre partes metálicas pode causar vazamentos, gerar calor, romper
a blindagem e produzir fogo. (Fig. 1)
Fig. 1
Fita Isolante
Como isolar os terminais
Fita Isolante
Não desmonte, não remova o invólucro, nem amasse a bateria. O gás liberado pela bateria pode irritar a
garganta, danicar o lacre do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo
devido ao curto circuito dos terminais. Não incinere nem aqueça as baterias, elas não podem car expostas a
temperaturas superiores a 100 °C (212 °F). O gás liberado pela bateria pode irritar a garganta, danicar o lacre
do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo devido ao curto circuito dos
terminais provocado internamente.
Evite o contato com o liquido que vazar das baterias. Caso isto ocorra, lave bem a parte afetada com bastante água.
Caso haja irritação, consulte um médico.
rRemoção das baterias
1. Pressione a guia e levante a tampa.
ii)
i)
2. Remova as baterias.
8 - ENGLISH
Read this rst!
WARNING:
rPOWER
The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible
when problems occur. If the following problems occur, cut off the power supply immediately.
Continued use of the projector in these conditions will result in re or electric shock.
fIf foreign objects or water get inside the projector, cut off the power supply.
fIf the projector is dropped or the cabinet is broken, cut off the power supply.
fIf you notice smoke, strange smells or noise coming from the projector, cut off the power supply.
Please contact an Authorized Service Center for repairs, and do not attempt to repair the projector yourself.
During a thunderstorm, do not touch the projector or the cable.
Electric shocks can result.
Do not do anything that might damage the power cord or the power plug.
If the power cord is used while damaged, electric shocks, short-circuits or re will result.
fDo not damage the power cord, make any modications to it, place it near any hot objects, bend it
excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle.
Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary.
Completely insert the power plug into the wall outlet and the power connector into the projector
terminal.
If the plug is not inserted correctly, electric shocks or overheating will result.
fDo not use plugs which are damaged or wall outlets which are coming loose from the wall.
Do not use anything other than the provided power cord.
Failure to observe this will result in electric shocks or re. Please note that if you do not use the provided power
cord to ground the device on the side of the outlet, this may result in electric shocks.
Clean the power plug regularly to prevent it from becoming covered in dust.
Failure to observe this will cause a re.
fIf dust builds up on the power plug, the resulting humidity can damage the insulation.
fIf not using the projector for an extended period of time, pull the power plug out from the wall outlet.
Pull the power plug out from the wall outlet and wipe it with a dry cloth regularly.
Do not handle the power plug and power connector with wet hands.
Failure to observe this will result in electric shocks.
Do not overload the wall outlet.
If the power supply is overloaded (ex., by using too many adapters), overheating may occur and re will result.
rON USE/INSTALLATION
Do not place the projector on soft materials such as carpets or sponge mats.
Doing so will cause the projector to overheat, which can cause burns, re or damage to the projector.
Do not set up the projector in humid or dusty places or in places where the projector may come into
contact with oily smoke or steam.
Using the projector under such conditions will result in re, electric shocks or deterioration of components.
Deterioration of components (such as ceiling mount brackets) may cause the projector which is mounted on the
ceiling to fall down.
Do not install this projector in a place which is not strong enough to take the full weight of the projector
or on top of a surface which is sloped or unstable.
Failure to observe this will cause projector to fall down or tip over the projector, and severe injury or damage
could result.
ENGLISH - 9
Read this rst!
WARNING:
Do not cover the air intake/exhaust ports.
Doing so will cause the projector to overheat, which can cause re or damage to the projector.
fDo not place the projector in narrow, badly ventilated places.
fDo not place the projector on cloth or papers, as these materials could be drawn into the air intake port.
fProvide at least 1 m (40") of space between any walls or objects and the exhaust port, and at least 50 cm (20")
of space between any walls or objects and the intake port.
Do not place your hands or other objects close to the air exhaust port.
Doing so will cause burns or damage your hands or other objects.
fHeated air comes out of the air exhaust port. Do not place your hands or face, or objects which cannot
withstand heat close to this port.
Do not look at or place your skin into the light emitted from the lens while the projector is being used.
Doing so can cause burns or loss of sight.
fStrong light is emitted from the projector’s lens. Do not look at or place your hands directly into this light.
fBe especially careful not to let young children look into the lens. In addition, turn off the power and switch
off the main power when you are away from the projector.
Never attempt to remodel or disassemble the projector.
High voltages can cause re or electric shocks.
fFor any inspection, adjustment and repair work, please contact an Authorized Service Center.
Do not project an image with the lens cover attached.
Doing so can cause re.
Do not allow metal objects, ammable objects, or liquids to enter inside of the projector. Do not allow
the projector to get wet.
Doing so may cause short circuits or overheating, and result in re, electric shock, or malfunction of the
projector.
fDo not place containers of liquid or metal objects near the projector.
fIf liquid enters inside of the projector, consult your dealer.
fParticular attention must be paid to children.
Use the ceiling mount bracket specied by Panasonic.
Using the ceiling mount bracket other than the specied one will result in falling accidents.
fAttach the supplied safety cable to the ceiling mount bracket to prevent the projector from falling down.
Installation work (such as ceiling mount bracket) should only be carried out by a qualied technician.
If installation is not carried out and secured correctly, it can cause injury or accidents, such as electric shocks.
fBe sure to use the wire provided with the ceiling mount bracket as an extra safety measure to prevent the
projector from falling down. (Install in a different location to the ceiling mount bracket.)
10 - ENGLISH
Read this rst!
WARNING:
rACCESSORIES
Do not use or handle the batteries improperly, and refer to the following.
Failure to observe this will cause burns, batteries to leak, overheat, explode or catch re.
fDo not use unspecied batteries.
fDo not use chargeable batteries.
fDo not disassemble dry cell batteries.
fDo not heat the batteries or place them into water or re.
fDo not allow the + and – terminals of the batteries to come into contact with metallic objects such as
necklaces or hairpins.
fDo not store or carry batteries together with metallic objects.
fStore the batteries in a plastic bag and keep them away from metallic objects.
fMake sure the polarities (+ and –) are correct when inserting the batteries.
fDo not use a new battery together with an old battery or mix different types of batteries.
fDo not use batteries with the outer cover peeling away or removed.
If the battery uid leaks, do not touch it with bare hands, and take the following measures if necessary.
fBattery uid on your skin or clothing could result in skin inammation or injury.
Rinse with clean water and seek medical advice immediately.
fBattery uid coming in contact with your eyes could result in loss of sight.
In this case, do not rub your eyes. Rinse with clean water and seek medical advice immediately.
Do not remove unspecied screws during the lamp unit replacement.
Doing so can cause electric shocks, burns, or injury.
Do not disassemble the lamp unit.
If the lamp breaks, it could cause injury.
Lamp replacement
The lamp has high internal pressure. If improperly handled, an explosion and severe injury or accidents will
result.
fThe lamp can easily explode if struck against hard objects or dropped.
fBefore replacing the lamp unit, be sure to turn the power off and to disconnect the power plug from the wall
outlet.
Electric shocks or explosions can result if this is not done.
fWhen replacing the lamp unit, turn the power off and allow the lamp to cool for at least one hour before
handling it otherwise it can cause burns.
Do not use the supplied power cord with devices other than this projector.
fUsing the supplied power cord with devices other than this projector may cause short circuits or
overheating, and result in electric shock or re.
Do not allow children to reach the batteries.
Accidentally swallowing them can cause physical harm.
fIf swallowed, seek medical advice immediately.
Remove the depleted batteries from the remote control promptly.
fLeaving them in the unit may result in uid leakage, overheating, or explosion of the batteries.
ENGLISH - 11
Read this rst!
CAUTION:
rPOWER
When disconnecting the power cord, be sure to hold the power plug and the power connector.
If the power cord itself is pulled, the lead will become damaged, and re, short-circuits or serious electric shocks
will result.
When not using the projector for an extended period of time, disconnect the power plug from the wall
outlet.
Failure to do so may result in re or electric shock.
Disconnect the power plug from the wall outlet before carrying out any cleaning and replacing the unit.
Failure to do so may result in electric shock.
rON USE/INSTALLATION
Do not place heavy objects on top of the projector.
Failure to observe this will cause the projector to become unbalanced and fall, which could result in damage or
injury. The projector will be damaged or deformed.
Do not put your weight on this projector.
You could fall or the projector could break, and injury will result.
fBe especially careful not to let young children stand or sit on the projector.
Do not place the projector in extremely hot locations.
Doing so will cause the outer casing or internal components to deteriorate, or result in re.
fTake particular care in locations exposed to direct sunlight or near heaters.
Do not install the projector in a location where salt pollution or corrosive gas may occur.
Doing so may result in falling due to corrosion. Also, it may result in malfunctions.
Do not place objects in front of the lens while the projector is being used.
Doing so can cause re, damage to an object, or malfunction of the projector.
fExtremely strong light is emitted from the projector’s lens.
Do not stand in front of the lens while the projector is being used.
Doing so can cause damage and burns to clothing.
fExtremely strong light is emitted from the projector’s lens.
Always disconnect all cables before moving the projector.
Moving the projector with cables still attached can damage the cables, which will cause re or electric shocks to
occur.
When mounting the projector on the ceiling, keep mounting screws and power cord from contact with
metal parts inside the ceiling.
Contact with metal parts inside the ceiling can cause electric shocks.
Never plug headphones and earphones into <VARIABLE AUDIO OUT> terminal.
Excessive sound pressure from earphones and headphones can cause hearing loss.
rACCESSORIES
Do not use the old lamp unit.
If used it could cause lamp explosion.
If the lamp has broken, ventilate the room immediately. Do not touch or bring your face close to the
broken pieces.
Failure to observe this will cause the user to absorb the gas which was released when the lamp broke and
which contains nearly the same amount of mercury as uorescent lamps, and the broken pieces will cause
injury.
fIf you believe that you have absorbed the gas or that the gas has got into your eyes or mouth, seek medical
advice immediately.
fAsk your dealer about replacing the lamp unit and check the inside of the projector.
12 - ENGLISH
Read this rst!
CAUTION:
When not using the projector for an extended period of time, remove the batteries from the remote
control.
Failure to observe this will cause the batteries to leak, overheat, catch re or explode, which may result in re
or contamination of surrounding area.
rMAINTENANCE
Do not attach the air lter unit while it is wet.
Doing so may result in electric shock or malfunctions.
fAfter you clean the air lter units, dry them thoroughly before reattaching them.
Ask your dealer about cleaning inside the projector once a year.
Continuous use while dust is accumulated inside the projector may result in re.
fFor cleaning fee, ask your dealer.
ENGLISH - 13
rTrademarks
fWindows, Internet Explorer and Mircrosoft Edge are registered trademarks or trademarks of Microsoft
Corporation in the United States and other countries.
fMac, Mac OS, OS X, iPad, iPhone, iPod touch and Safari are trademarks of Apple Inc., registered in the United
States and other countries.
fIOS is a trademark and registered trademark of Cisco in the United States and other countries and is used
under license.
fAndroid is a trademark of Google Inc.
fVueMagic is a trademark of Pixelworks, Inc.
fPJLink
fHDMI, the HDMI Logo and High-Denition Multimedia Interface are trademarks or registered trademarks of
fRoomView and Crestron RoomView are registered trademarks of Crestron Electronics, Inc.
fHDBaseT™ is a trademark of HDBaseT Alliance.
fAdobe, Adobe Flash Player and Adobe Reader are trademarks or registered trademarks of Adobe Systems Inc.
fSome of the fonts used in the on-screen menu are Ricoh bitmap fonts, which are manufactured and sold by
fAll other names, company names and product names mentioned in this manual are trademarks or registered
TM
is a registered trademark or pending trademark in Japan, the United States and other countries and
regions.
HDMI Licensing LLC in the United States and other countries.
TM
Crestron Connected
in the United States and/or other countries.
Ricoh Company, Ltd.
trademarks of their respective owners.
Please note that the
and Fusion RV are trademarks of Crestron Electronics, Inc.
®
and TM symbols are not specied in this manual.
rSoftware information regarding this product
This product incorporates the following software.
(1) The software which is developed independently by or for Panasonic Corporation
(2) The software owned by third party and licensed to Panasonic Corporation
(3) The software which is licensed under the GNU GENERAL PUBLIC LICENSE Version2.0 (GPL V2.0)
(4) The software which is licensed under the GNU LESSER GENERAL PUBLIC LICENSE Version2.1 (LGPL V2.1)
(5) Open source software which is not licensed under the GPL V2.0 and LGPL V2.1
The software categorized as (3) ~ (5), the license is available in accordance with gnu general public license and
gnu lesser general public license respectively, it is distributed in the hope that it will be useful, but without any
warranty, without even the implied warranty of merchantability or tness for a particular purpose. As for the terms
and conditions, please refer to the software license of the supplied CD-ROM.
If you wish to ask any questions as to the software, please contact (sav.pj.gpl.pavc@ml.jp.panasonic.com) by
email.
rIllustrations in this manual
fIllustrations of the projector, screen, and other parts may vary from the actual product.
fPictures shown are illustrations of PT-FZ570 in this manual, other models have their own characteristics and
may be different from them.
rReference pages
fReference pages in this manual are indicated as (x page 00).
rTerm
fIn this manual, the “Wireless remote control unit” accessory is referred to as “Remote control”.
14 - ENGLISH
Features of the Projector
Highly exible setup
▶ Easy and highly exible setup is achieved
by 1.8 times zoom lens, lens shift function
and DIGITAL LINK compatibility (
19
).
▶ KEYSTONE, CORNER CORRECTION and
CURVED CORRECTION functions allow
you to correct the distortion of the various
images easily.
Reduced maintenance costs
▶ New lamp driving system and long life lter
have greatly improved the recommended
time to replace the lamp and lter, so you
can reduce the maintenance cost.
[Reference]
fLamp: 6 000 Hours ([LAMP POWER] is set to [NORMAL])
8 000 Hours ([LAMP POWER] is set to [ECO])
fFilter: 16 000 Hours
* This time is only the target for replacement and not the
warranty time.
x page
Quick Steps
For details, refer to the corresponding pages.
1. Set up the projector.
(x page 31)
2. Connect with external devices.
(x page 36)
3. Connect the power cord.
(x page 41)
4. Switch on the projector.
(x page 42)
5. Make initial settings.
(x page 43)
fTake this step when you switch on the power for
the rst time after purchasing the projector.
Energy conservation achieved
through the ECO function
▶ The function to reduce power consumption
is installed, which is optimizing the light
source power according to the brightness
of the surroundings, input signal, and video
mute status.
6. Select the input signal.
(x page 47)
7. Adjust the image.
(x page 48)
ENGLISH - 15
Chapter 1 Preparation
This chapter describes things you need to know or check before using the projector.
16 - ENGLISH
Chapter 1 Preparation — Precautions for use
Precautions for use
Lens cushion
fIn order to protect the projection lens from the vibration during transportation, lens cushion is attached to the
product at the time of purchase. Please remove the lens cushion before use.
Lens cushion
Cautions when transporting
fWhen transporting the projector, hold it securely by its bottom and avoid excessive vibration and impacts. They
may damage the internal components and result in malfunctions.
fDo not transport the projector with the adjustable feet extended. Doing so may damage the adjustable feet.
fDo not move or transport the projector with the wireless module (Model No.: ET-WML100) of the optional
accessories attached. Doing so may damage the wireless module.
Cautions when installing
rDo not set up the projector outdoors.
The projector is designed for indoor use only.
rDo not set up the projector in the following locations.
fPlaces where vibration and impacts occur such as in a car or vehicle: Doing so may cause damage to internal
components or malfunction.
fLocations near the sea or areas affected by corrosive gas: Corrosion may damage internal components or
cause the projector to malfunction.
fNear the exhaust of an air conditioner: Depending on the conditions of use, the screen may uctuate in rare
cases due to the heated air from the air exhaust port or the hot or cooled air. Make sure that the exhaust
from the projector or other equipment, or the air from the air conditioner does not blow toward the front of the
projector.
fNear high-voltage power lines or near motors: Doing so may interfere with the operation of the projector.
fPlaces with sharp temperature uctuations such as near lights (studio lamps): Doing so may shorten the life of
the lamp, or result in deformation of the outer case due to heat, which may cause malfunctions.
Follow the operating environment temperature of the projector.
rBe sure to ask a specialized technician or your dealer when installing the projector on
a ceiling.
The optional Ceiling Mount Bracket is required. Be sure to use the Projector Mount Bracket together with the
ceiling mount bracket for high ceilings or low ceilings.
Model No.:
ET-PKD120H (for High Ceilings), ET-PKE300B (Projector Mount Bracket)
ET-PKD120S (for Low Ceilings), ET-PKE300B (Projector Mount Bracket)
rAsk a qualied technician or your dealer to install the cable wiring for DIGITAL LINK
connection.
Image and sound may be disrupted if cable transmission characteristics cannot be obtained due to inadequate
installation.
ENGLISH - 17
Chapter 1 Preparation — Precautions for use
rThe projector may not work properly due to strong radio waves from the broadcast
station or the radio.
If there is any facility or equipment, which outputs strong radio waves, near the installation location, install the
projector at a location sufciently far from the source of the radio waves. Or, wrap the LAN cable connected to the
<DIGITAL LINK/LAN> terminal by using a piece of metal foil or a metal pipe which is grounded at both ends.
rFocus adjustment
The projection lens is thermally affected by the light from the light source, making the focus unstable in the period
just after switching on the power. It is recommended that images be projected continuously for at least 30 minutes
before the focus is adjusted.
rDo not install the projector at elevations of 2 700 m (8 858') or higher above sea level.
rDo not use the projector in a location that the ambient temperature exceeds 40 °C
(104 °F).
Using the projector in a location that the altitude is too high or the ambient temperature is too high may reduce the
life of the components or result in malfunctions.
The upper limit of the operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F)
when using it at elevations lower than 1 400 m (4 593') above sea level, and between 0 °C (32 °F) and 35 °C
(95 °F) when using it at high altitudes (between 1 400 m (4 593') and 2 700 m (8 858') above sea level).
rDo not use the projector vertically or tilted to the right or the left.
fDo not use the projector tilted at an angle that exceeds ±30° from the vertical plane or ±15° from the horizontal
plane. It may reduce the life of the components.
+30°
-
30°
+15°
-
15°
rCautions when setting up the projector
fUse the adjustable feet only for the oor standing installation and for adjusting the angle. Using them for other
purposes may damage the projector.
fWhen installing and using the projector with a method other than the oor standing installation using the
adjustable feet or the ceiling mount, please x the projector by using the four screw holes with "M6" mark for
ceiling mount (as shown in the gure).
(Screw diameter: M6, tapping depth inside the set: 12 mm (15/32"), torque: 4 ± 0.5 N·m)
Also at that time, make sure that there is no clearance between the screw holes for ceiling mount on the
projector bottom and the setting surface by inserting spacers (metallic) between them.
When using the existing ceiling mount bracket (for high ceilings) ET-PKF110H or the existing ceiling mount
bracket (for low ceilings) ET-PKF110S, you can use the four screw holes with “M4” mark (as shown in the
gure), but do not use these holes for other than ceiling mount. (x page 154)
(Screw diameter: M4, tapping depth inside the set: 8 mm (5/16"), torque: 1.25 ± 0.2 N·m)
In addition, do not mix the M4 and M6 screw holes for installation.
Adjustable feet
Screw holes for ceiling mount (M6)
The positions of screw holes for ceiling mount and adjustable feet
18 - ENGLISH
M6
M4
M6
M4
M4
M6
M6
M4
M4
M6
Screw holes for
ceiling mount (M4)
Chapter 1 Preparation — Precautions for use
+15°
-
15°
fDo not stack projectors on top of each other.
fDo not use the projector supporting it by the top.
fDo not block the ventilation ports (intake and exhaust) of the projector.
fPrevent hot and cool air from the air conditioning system to blow directly to the ventilation ports (intake and
exhaust) of the projector.
1 000 mm (40") or longer500 mm (20") or longer
1 000 mm (40") or longer
100 mm (4")
fDo not install the projector in a conned space.
When installing the projector in a conned space, provide air conditioning or ventilation separately. Exhaust heat
may accumulate when the ventilation is not enough, triggering the protection circuit of the projector.
or longer
Security
When using this product, take safety measures against the following incidents.
fPersonal information being leaked via this product
fUnauthorized operation of this product by a malicious third party
fInterfering or stopping of this product by a malicious third party
Take sufcient security measures. (x pages 98, 125)
fMake your password difcult to guess as much as possible.
fChange your password periodically. The password can be set in [SECURITY] menu → [PASSWORD CHANGE].
fPanasonic Corporation or its afliate companies will never ask for your password directly. Do not divulge your
password in case you receive such inquiries.
fThe connecting network must be secured by a rewall, etc.
fSet a password for the web control and restrict the users who can log in. The password for the web control can
be set in [Change password] page of the web control function.
DIGITAL LINK
“DIGITAL LINK” is a technology to transmit the video, audio, Ethernet, and serial control signals using a twisted
pair cable by adding unique functions by Panasonic to the HDBaseTTM communication standard formulated by
HDBaseT Alliance.
This projector supports the optional Panasonic DIGITAL LINK output supported device (Model No.: ET-YFB100G,
ET-YFB200G) and peripheral devices by other manufacturers (twisted-pair-cable transmitters such as the
“XTP transmitter” of Extron Electronics) that use the same HDBaseT
manufacturers that the operation has been veried with this projector, refer to Panasonic website
(http://panasonic.net/avc/projector/). Note that the verication for devices of other manufacturers has been
made for the items set by Panasonic Corporation, and not all the operations have been veried. For operation or
performance problems caused by the devices of other manufacturers, contact the respective manufacturers. In
addition, the projector does not support audio transmission because it is not equipped with audio function.
TM
standard. For the devices of other
ENGLISH - 19
Chapter 1 Preparation — Precautions for use
Notes on Using Wireless Connection
Wireless connection function of the projector uses radio waves in the 2.4 GHz band.
A radio station license is not required, but be sure to read and fully understand the following items before use.
The wireless module (Model No.: ET-WML100) of optional accessories must be installed when you want to use
the wireless LAN function of this projector.
rDo not use near other wireless equipment.
The following equipment may use radio waves in the same band as the projector.
When the projector is used near these devices, radio wave interference may make communication impossible, or
the communication speed may become slower.
fMicrowave ovens, etc.
fIndustrial, chemical and medical equipment, etc.
fIn-plant radio stations for identifying moving objects such as those used in factory manufacturing lines, etc.
fDesignated low-power radio stations.
r If at all possible, avoid the use of cellular phones, TV sets or radios near the projector.
Cellular phones, TV sets, radios and similar devices use different radio bands from the projector, so there is no
effect on wireless communication or the transmission and reception of these devices. However, radio waves from
the projector may produce audio or video noise.
r Wireless communication radio waves cannot penetrate steel reinforcements, metal,
concrete, etc.
Communication is possible through walls and oors made from materials such as wood and glass (except glass
containing wire mesh), but not through walls and oors made from steel reinforcements, metal, concrete, etc.
r Avoid using the projector in locations prone to static electricity.
If the projector is used in a location prone to static electricity, such as on a carpet, the wireless LAN or wired LAN
connection may be lost.
If the static electricity or noise make it impossible to establish a connection with the LAN, please press the power
button on the remote control or the control panel to power off the projector, and eliminate the source of static
electricity or noise, then turn on the projector.
rUsing the projector outside the country
Note that depending on countries or regions there are restrictions on the channels and frequencies at which you
can use the wireless LAN.
rAvailable wireless LAN channels
The channels (frequency range) that can be used differ according to the country or region. Refer to the table
below.
Country or region Standard Channels used Frequency band (Center frequency)
Global IEEE802.11b/g/n 1 - 11 channel 2.412 GHz - 2.462 GHz
The frequency and channel differ depending on the country.
Please use the wireless LAN feature in compliance with the laws of each country.
Note
fThe wireless module (Model No.: ET-WML100) of the optional accessories is required if you want to use the wireless LAN
function of this projector.
20 - ENGLISH
Chapter 1 Preparation — Precautions for use
About Wireless LANs
The advantage of a wireless LAN is that information can be exchanged between a PC or other such equipment
and an access point using radio waves as long as you are within range for radio transmissions.
On the other hand, because the radio waves can travel through obstacles (such as walls) and are available
everywhere within a given range, problems of the type listed below may occur if security-related settings are
not made.
fA malicious third-part may intentionally intercept and monitor transmitted data including the content of e-mail
and personal information such as your ID, password, and/or credit card numbers.
fA malicious third-party may access your personal or corporate network without authorization and engage in
the following types of behavior.
Retrieve personal and/or secret information (information leak)
Spread false information by impersonating a particular person (spoong)
Overwrite intercepted communications and issue false data (tampering)
Spread harmful software such as a computer virus and crash your data and/or system (system crash)
Since most wireless LAN adapters or access points are equipped with security features to take care of these
problems, you can reduce the possibility of these problems occurring when using this product by making the
appropriate security settings for the wireless LAN device.
Some wireless LAN devices may not be set for security immediately after purchase. To decrease the possibility
of occurrence of security problems, before using any wireless LAN devices, be absolutely sure to make all
security-related settings according to the instructions given in the operation manuals supplied with them.
Depending on the specications of the wireless LAN, a malicious third-party may be able to break security
settings by special means.
Panasonic asks customers to thoroughly understand the risk of using this product without making security
settings, and recommends that the customer make security settings at their own discretion and responsibility.
Early Warning Software
The projector supports “Early Warning Software”, which monitors the status of the display (projector and at panel
display) and the peripheral devices inside an intranet, and noties of abnormality of such equipment and detects
signs of possible abnormality. Also, maintenance can be performed in advance, because this software gives
notication of approximate time to replace consumables of the display, to clean each part of the display, and to
replace the components of the display.
Depending on the type of license, the number of displays that can be registered for monitoring varies. Limited to
the rst 90 days after installation in a computer, it is possible to register up to 2048 units of displays free of charge.
Download the software from Panasonic website (http://panasonic.net/avc/projector/pass/). It is necessary to
register and login to PASS
*1 PASS: Panasonic Professional Display and Projector Technical Support Website
Refer to Panasonic website (http://panasonic.net/avc/projector/pass/) for details.
*1
to download.
ENGLISH - 21
Chapter 1 Preparation — Precautions for use
Cautions on use
rTo get a good picture quality
fIn order to view a beautiful image in higher contrast, prepare an appropriate environment. Draw curtains or
blinds over windows and turn off any lights near the screen to prevent outside light or light from indoor lamps
from shining onto the screen.
rDo not touch the surface of the projection lens with your bare hands.
If the surface of the projection lens becomes dirty from ngerprints or anything else, this will be magnied and
projected onto the screen.
Please keep in mounting the supplied lens cover when you do not use the projector.
rLCD panel
fThe LCD panel is precision-made. Note that in rare cases, pixels of high precision could be missing or always
lit. Note that such phenomena do not indicate malfunction. If still images are projected for a long time, a residual
image may remain on the LCD panel. Note that the residual image may not disappear.
rOptical parts
When the operating environment temperature is high or in environments where lots of dust, cigarette smoke, etc.
is present, the replacement cycle of the LCD panel, polarizing plates and other optical parts may be shorter even
if used for less than one year. Consult your dealer for details.
rDo not move the projector or subject it to vibration or impact while it is operating.
Doing so may shorten the life of the built-in motor.
rLamp
The light source of the projector is a high-pressure mercury lamp.
A high-pressure mercury lamp has the following characteristics.
fThe luminance of the lamp will decrease by duration of usage.
fThe lamp may burst with a loud sound or have its service life shortened because of shock, chipping, or
degradation due to cumulative runtime.
fThe lamp life varies greatly depending on individual differences and usage conditions. In particular, continuous
use for 12 hours or more and frequent off/on switching of the power greatly deteriorate the lamp and affects the
lamp life.
fIn rare cases, the lamp bursts shortly after projection starts.
fThe risk of bursting increases when the lamp is used beyond its replacement cycle. Make sure to replace the
lamp unit regularly.
(“When to replace the lamp unit” (x page 135), “How to replace the lamp unit” (x page 136))
fIf the lamp bursts, gas contained inside of the lamp is released in the form of smoke.
fIt is recommended that you store the Replacement lamp unit as a contingency.
rComputer and external device connections
fWhen connecting a computer or an external device, read this manual carefully regarding the use of power cords
and shielded cables as well.
Disposal
To dispose of the product, ask your local authorities or dealer for correct methods of disposal.
The lamp contains mercury. When disposing of used lamp units, contact your local authorities or dealer for correct
methods of disposal.
22 - ENGLISH
Chapter 1 Preparation — Precautions for use
Accessories
Make sure that the following accessories are provided with your projector. Numbers enclosed in < > show the
number of accessories.
Wireless remote control unit <1>
(N2QAYA000123)
Power cord
(TXFSX02RYJZ)
(TXFSX02RYLZ)
Lens cover <1>
(TXFKK01XMQZ)
CD-ROM <1>
(TXFQB02XSLZ)
AAA/R03 or AAA/LR03 battery <2>
(For remote control unit)
(TXFSX02RWFZ)
(TXFSX02UTRZ)
Attention
fAfter unpacking the projector, discard the power cord cap and packaging material properly.
fDo not use the supplied power cord for devices other than this projector.
fFor missing accessories, consult your dealer.
fStore small parts in an appropriate manner, and keep them away from small children.
Note
fThe type and number of the supplied power cords vary depending on the country or region where you purchased the
product.
fThe model numbers of accessories are subject to change without prior notice.
ENGLISH - 23
Chapter 1 Preparation — Precautions for use
Contents of the supplied CD-ROM
The contents of the supplied CD-ROM are as follows.
Instruction/list (PDF) Operating Instructions
Multi Monitoring & Control Software Operating Instructions
Logo Transfer Software Operating Instructions
Presenter Light Software Operating Instructions
List of Compatible Device Models
Software license
Software
Multi Monitoring & Control Software
(Windows)
Logo Transfer Software (Windows)
Optional accessories
This is a list of display models (projector or
at panel display) that are compatible with the
software contained in the CD-ROM and their
restrictions.
The open source software licenses that used
in this projector are included in the PDF les.
This software allows you to monitor and
control multiple displays (projector or at
panel display) connected to the LAN.
This software allows you to transfer original
images, such as company logos to be
displayed when projection starts, to the
projector.
Optional accessories
(product name)
ET-PKD120H (for High Ceilings)
Ceiling Mount Bracket
Replacement Lamp Unit
Replacement Filter Unit ET-RFF200
Early Warning Software
(Basic license/3-year license)
Digital Interface Box ET-YFB100G
DIGITAL LINK Switcher
Wireless Module ET-WML100E / ET-WML100U
D-SUB - S Video conversion cable
*1 The sufx of the Model No. differs according to the license type.
*2 In this document, the alphabet letters at the end of the model numbers are omitted.
ET-PKD120S (for Low Ceilings)
ET-PKE300B (Projector Mount Bracket)
ET-LAEF100
ET-SWA100 Series
ET-YFB200G
ET-ADSV
*1
Model No.
*2
Note
fThe model numbers of optional accessories are subject to change without prior notice.
24 - ENGLISH
Chapter 1 Preparation — About your projector
About your projector
Remote control
Front Top
1
2
3
4 4
5
10
11
23
6
15
7
9
1 Power <v/b> button (v standby/b power on)
Sets the projector to the state where the projector is switched
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in the projection mode.
Also starts projection when the power is switched off (standby
mode).
2 Remote control indicator
Blinks if any button in the remote control is pressed.
3 <MENU> button/<RETURN> button/<ENTER> button/
asqw buttons
Used to navigate through the menu screen. (x page 57)
4 <VOL
5 <DEFAULT> button
6 Input selection (<COMPUTER1/2>, <DIGITAL LINK>,
7 Number (<0> ~ <9>) buttons
8 <ON SCREEN> button
9 <ID ALL> button
10 <AUTO SETUP> button
-
> button/<VOL+> button
Adjusts the volume of the built-in speaker or audio output.
(x page 50)
Resets the content of the sub-menu to the factory default.
(x page 58)
<VIDEO>, <NETWORK>, <HDMI1>, <HDMI2>) buttons
Switches the input signal to project. (x page 47)
Used for entering an ID number or a password in a multiple
projectors environment.
Switches on (display)/off (hide) the on-screen display function.
(x page 51)
Used to simultaneously control all the projectors with a
single remote control in a multiple projector environment.
(x page 55)
Automatically adjusts the image display position while the
image is projected. (x page 51)
16
17
12
13
14
Bottom
18
19
20
21
228
11 <FUNCTION> button
Assigns a frequently used operation as a shortcut button.
(x page 54)
12 <TEST PATTERN> button
Displays the test pattern. (x page 54)
13 <ID SET> button
Sets the ID number of the remote control in a multiple projector
environment. (x page 55)
14 <ECO> button
Displays the setting screen relating to ECO management.
(x pages 55, 88)
15 <SCREEN ADJ> button
You can correct various types of distortion in a projected
image. (x page 52)
16 <FREEZE> button
Used when pausing the image and turning off the audio.
(x page 51)
17 <P-TIMER> button
Operates the presentation timer function. (x page 53)
18 <D.ZOOM -> button/<D.ZOOM +> button
Zoom in and out the images. (x pages 52, 86)
19 <AV MUTE> button
Used when temporarily turning off the video and the audio.
(x page 50)
20 <MUTE> button
Used when temporarily turning off the audio. (x page 50)
21 <ASPECT> button
Switches the aspect ratio of the image. (x page 52)
22 <STATUS> button
Displays the projector information. (x pages 54, 87)
23 Remote control signal transmitter
24 This terminal is not used in this projector.
24
ENGLISH - 25
Chapter 1 Preparation — About your projector
Attention
fDo not drop the remote control.
fAvoid contact with liquids or moisture.
fDo not attempt to modify or disassemble the remote control.
fPlease observe the following contents that are described on the back of the remote
control unit (see the right picture).
1. Do not use a new battery together with an old battery.
2. Do not use unspecied batteries.
3. Make sure the polarities (+ and -) are correct when inserting the batteries.
fIn addition, please read the contents that are related to batteries in the "Read this rst!".
1.Do not use old battery with new one.
2.Do not use batteries other than the
type specified.
3.Be sure the batteries are inserted properly.
Caution label at the back of the remote control
Note
fWhen operating the remote control by directly pointing the remote control signal receiver of the projector, operate the remote control at
a distance approx. 30 m (98'5") or shorter from the remote control signal receiver. The remote control can control at angles of up to ±30°
vertically and horizontally, but the effective control range may be reduced.
fIf there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate properly.
fThe signal will be reected off the screen. However, the operating range may be limited from light reection loss due to the screen material.
fIf the remote control signal receiver directly receives strong light, such as uorescent light, the remote control may not operate properly. Use
it in a place distant from the light source.
fThe power indicator <ON(G)/STANDBY(R)> will blink if the projector receives a remote control signal.
Projector body
Front Side
1 762 3 4 5
8
9 10 8
Rear
11
12
13 14 1615
17
Projection direction
WARNING
Keep your hands and other objects away from the air
exhaust port.
fKeep your hands and face away.
fDo not insert your ngers.
fKeep heat-sensitive objects away.
Heated air from the air exhaust port can cause burns, injury, or
deformations.
1 Remote control signal receiver (front)
2 Power indicator <ON(G)/STANDBY(R)>
Displays the status of the power.
18
3 Lamp indicator <LAMP>
Displays the status of the lamp.
4 Temperature indicator <TEMP>
Displays the status of the internal temperature.
5 Filter indicator <FILTER>
Displays the status of the air lter unit.
6 Focus lever (Front)
Zoom lever (Back)
7 Lens shift lever
Adjusts the projection position.
8 Adjustable feet
Adjusts the projection angle.
9 Speaker
10 Projection lens
11 Air exhaust port
12 Remote control signal receiver (rear)
19
11
26 - ENGLISH
Chapter 1 Preparation — About your projector
13 <AC IN> terminal
Connect the supplied power cord.
14 <MAIN POWER> switch
Turns off/on the main power.
15 Connecting terminals (x page 28)
16 Security slot
This security slot is compatible with the Kensington security
cables.
Bottom Top
Projection direction
17 Control panel (x page 27)
18 Air lter cover
The air lter units are inside.
19 Air intake port
21
19
20 Burglar hook port
Attaches a burglar prevention cable, etc.
21 Luminance sensor
Measures the brightness of the installation environment. When
the daylight view function is set to [AUTO], the vividness of the
image is automatically corrected. (x page 64)
Attention
fDo not block the ventilation ports (intake and exhaust) of the projector.
r Control panel
1
2
3
4
1 Power <v/b> button (v standby/b power on)
Sets the projector to the state where the projector is switched
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in the projection mode. Also starts
projection when the power is switched off (standby mode).
2 <MENU> button/<ENTER> button/asqw buttons
Used to navigate through the menu screen. (x page 57)
Returns to the previous menu when a sub-menu is displayed.
Also used to enter a password in [SECURITY] or enter
characters.
2220
22 Lamp cover
The lamp unit is inside.
5
3
6
3 <VOL
4 <AV MUTE> button
5 <INPUT SELECT> button
6 <AUTO SETUP> button
-
> button/<VOL+> button
Adjusts the volume of audio output. (x page 50)
Used when temporarily turning off the image and audio.
(x page 50)
Switches the input signal to project. (x page 47)
Automatically adjusts the screen display position when
projecting the image. (x page 51)
ENGLISH - 27
r Connecting terminals
1 32 4 5 6
7 8 9 10 11
Chapter 1 Preparation — About your projector
1 <WIRELESS> terminal
Insert the optional wireless module (Model No.: ET-WML100)
directly to this terminal when using the wireless LAN function.
2 <COMPUTER 2 IN/1 OUT> terminal
This is the terminal to input RGB signals or YC
signals, also to output the <COMPUTER 1 IN> RGB signals
and YCBCR/YPBPR signals, which is input to the terminal.
3 <COMPUTER 1 IN> terminal
This is the terminal to input RGB signals, YC
or Y/C signals.
4 <HDMI 1 IN> terminal/<HDMI 2 IN> terminal
This is the terminal to input HDMI signals.
5 <LAN> terminal
This is the LAN terminal to connect to the network.
6 <DIGITAL LINK/LAN> terminal
This is the LAN terminal to connect to the network. This is also
used when connecting a video signal transmission device via
the LAN terminal.
/YPBPR
BCR
/YPBPR signals,
BCR
7 <DC OUT> terminal
This is a USB terminal only for power supply. (DC 5 V,
maximum 900 mA)
This can be used when power is to be supplied to a wireless
display adapter, etc.
8 <SERIAL IN> terminal
This is the RS-232C compatible terminal to externally control
the projector by connecting a computer.
9 <VIDEO IN> terminal
This is the terminal to input video signals.
10 <AUDIO IN 1> terminal/<AUDIO IN 2> terminal/
<AUDIO IN 3> terminal
This is the terminal to input audio. Left input <L> and right input
<R> are provided for the <AUDIO IN 3> terminal.
11 <VARIABLE AUDIO OUT> terminal
This is the terminal to output the input audio signal to the
projector.
Attention
fWhen a LAN cable is directly connected to the projector, the network connection must be made indoors.
28 - ENGLISH
Chapter 1 Preparation — Preparing the remote control
Preparing the remote control
Inserting and removing the batteries
ii)
i)
Fig. 1
1) Open the cover. (Fig. 1)
2) Insert the batteries and close the cover (insert the m side first). (Fig. 2)
fWhen removing the batteries, perform the steps in reverse order.
Fig. 2
When using the system with multiple projectors
When you use the system with multiple projectors, you can operate all the projectors simultaneously or each
projector individually by using single remote control, if a unique ID number is assigned to each projector.
When you want to set the ID number, at rst you need to complete the Initial setting, and then after setting the ID
number of the projector, set the ID number on the remote control.
About Initial setting, please refer to “When the initial setting screen is displayed” (x page 43).
The factory default ID number of the unit (the projector and the remote control) is set to [ALL], you can control with
this setting. If necessary, please set the ID number to the remote control and the projector.
About how to set the ID number of the remote control, please refer to “Setting the ID number of the remote control”
(x page 55).
Note
fSet the ID number of the projector from the [PROJECTOR SETUP] menu → [PROJECTOR ID] (x page 87).
ENGLISH - 29
Chapter 2 Getting Started
This chapter describes things you need to do before using the projector such as the setup and connections.
30 - ENGLISH
Loading...