Panasonic PT-FW530 User Manual

PEC

Product Number : PT-FW530

Product Name : LCD Projectors

ILE

As of March 2016. Specifications and appearance are subject to change without notice.

SFD16M036

1/11

LCD Projector

Specications

Main unit

Power supply

Power consumption

BTU value

LCDpanel

Lens

Lamp

Screen size Brightness*

Center-to-corner uniformity* Contrast*

Resolution

Scanning frequency

Keystone correction range

Standby Mode (Eco)* Standby Mode (Normal) 12W Standby Mode (Normal and Audio monitor out) 30W

Panel size Display method Drive method Pixels

HDMI/DIGITAL LINK RGB YP

Video/S-Video

BPR (YCBCR)

PT-

FW530

AC100 - 240V 4.5 - 1.8A 50Hz/60Hz 400W

0.5W, 0.3W (Taiwan)

Max 1,365 BTU

16.3 mm (0.64 in) diagonal (16:10 aspect ratio)

Transparent LCD panel (× 3, R/G/B)

Active matrix 1,024,000 (1,280 × 800) × 3, total of 3,072,000 pixels Manual zoom (throw ratio 1.22-2.26:1), Manual focus, F 1.6-2.2, f 17.1-31.7 mm

270 W UHM lamp

Lamp replacement cycle 6,000 hours (lamp power: Normal), 8,000 hours (lamp power: Eco) This is the maximum value when the lamp is turned on for 2 hours and off for 0.25 hours.

1.02–7.62 m (40–300 inches) (16:10 aspect ratio) 4,500 lumens

(Lamp power: Normal, Dynamic mode, Iris off, Daylight View:off, Auto Power Save:off)

90% 10,000:1

(Lamp power: Normal, Dynamic mode, Iris on, Daylight View:off, Auto Power Save:off)

1,280 × 800 pixels fH: 15- 91kHz, fV: 24 - 100Hz, dot clock: 25 - 162 MHz fH: 15- 91kHz, fV: 24 - 100Hz, dot clock: 162 MHz or lower 525i (480i): f 625i (576i): f 525p (480p): f 625p (576p): f 750 (720)/60p: f 750 (720)/50p: f 1125 (1080)/60i: f 1125 (1080)/50i: f 1125 (1080)/25p: f 1125 (1080)/24p: f 1125 (1080)/24sF: f 1125 (1080)/30p: f 1125 (1080)/60p: f 1125 (1080)/50p: f f

H: 15.75 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60] H: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]

Only [KEYSTONE] used

Vertical

keystone

correction

angle α (°)

±35 ±35 ±35±35 1.01.0 1.01.0

Horizontal

keystone

correction

angle β (°)

Vertical

keystone

correction

angle α (°)

H15.73 kHz; fV59.94 Hz, H15.63 kHz; fV50 Hz, H31.47 kHz; fV60 Hz, H31.25 kHz; fV50 Hz, H45.00 kHz; fV60 Hz, H37.50 kHz; fV50 Hz, H33.75 kHz; fV60 Hz, H28.13 kHz; fV50 Hz, H28.13 kHz; fV25 Hz, H27.00 kHz; fV24 Hz, H27.00 kHz; fV48 Hz, H33.75 kHz; fV30 Hz, H67.50 kHz; fV60 Hz, H56.25 kHz; fV50 Hz

[KEYSTONE] and [CURVED] used together Only [CURVED] used

Horizontal

keystone

correction

angle β (°)

Min. value

of R2/L2

Min. value

of R3/L3

Min. value

of R2/L2

Min. value

of R3/L3

[VERTICAL KEYSTONE] (viewed from the side) [HORIZONTAL KEYSTONE] (viewed from above)

Screen

As of March 2016 2/11

SFD16M036

LCD Projector

ibl

)

Y, P P

(

)

automatic

(

)

sub

)

PT-

FW530

Keystone correction range

Vertical arc correction (viewed from the side) Horizontal arc correction (viewed from above)

Projection distance Arc radius

Screen

Arc center

Screen

Projection distance Arc radius

• When [Curved screen correction] is used, the focus of the entire screen may be lost as correction increases.

• Make the curved screen a circular arc shape with one part of a perfect circle removed.

Screen

Arc center

Screen

Optical axis shift Vertical: ±60% (Manual) Horizontal: ±30% (Manual) Installation Ceiling/oor, front/rear Speaker 4.0 cm (1-9/16 in) 10W (monaural) × 1 Terminals

HDMI IN 1/HDMI IN 2

9-pin

eep

olor

ompat

e wtHDCP

Audio signal: linear PC (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz COMPUTER 1 IN D-sub HD 15-pin (female) × R,G,B:

.7 Vp-p, 75 ohms, (G: 1.0 Vp-p, 75 ohms for sync on G HD/VD, SYNC: TTL, high impedance, positive/negative automat

, C

Y: 1.0 Vp-p (including sync signal),

: 0.7 Vp-p, 75 ohms

Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohm

MPUTER 2 IN/MPUTER 1 OU

D-sub HD 15-pin (female) ×

R,G,B:

.7 Vp-p, 75 ohms, (G: 1.0 Vp-p, 75 ohms for sync on HD/VD, SYNC: TTL, high impedance, positive/negative

OTE: SYNC/HD and VD terminals do not accept tri-level sync signals.

Y:1.0 Vp-p (including sync signal),

(

0.7 Vp-p, 75 ohms VIDEO IN Pin jack × 1, 1.0 Vp-p, 75 ohm AUDIO IN 1/AUDIO IN 2 M3 × 2, 0.5 Vrms, input impedance: 22 kilohms or mor AUDIO IN 3 Pin jack(L, R) × 1, 0.5 Vrms, input impedance: 22 kilohms or mor VARIABLE AUDIO OUT M3 × 1 (monitor out, stereo) 0–2.0 Vrms, variable, out

ERIAL IN

9 p × 1, for external control (RS-232C compliant

ut impedance: 2.2 kilohms or les

DIGITAL LINK/LAN RJ-45 x 1 (HDBaseT™ compatible), 100Base-TX, PJLink(Class 1) Deep Color, compatible with HDC Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz) LAN RJ-45 x 1 for network connection 10Base-T/100Base-TX compatible with Art-Net, PJLink™Class 1 WIRELESS USB Type A × 1, for wireless projection with optional dongle (ET-WML100 DC OUT USB Type A × 1, for power supply (DC5 V, max 900 mA

Projection distance Arc radius

As of March 2016 3/11

SFD16M036

LCD Projector

PT-

FW530

Power cord length Cabinet materials Dimensions (W × H × D)

2.0 m (6 ft7 in) Molded plastic 498 x 145*

x 398.3mm

(19-19/32 x 5-11/16*

Weight* Operation noise Operating environment

Operating temperature Operating humidity

Approx. 7.9kg (17.4lbs) 29 dB (Eco), 33 dB (Normal) 0–40 °C (32–104 °F)* 20%–80% (no condensation)

Remote control unit

Power supply Operation range*

3 V DC (R03/LR03/AAAtypebattery × 2) Approx. 30 m (98 ft5 in) when operated from directly in front of the

signal receptor

Dimensions (W × H × D) Weight

48 × 145 × 27 mm (1-7/8 × 5-23/32 × 1-1/16inches) Approx. 102 g (3.6 oz) (including batteries)

Supplied accessories

Power cord (including power cord holder)(× 1) Wireless/wireled remote control unit (× 1) Batteries for remote control (AAA/R03/LR03 type× 2) Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring &

Control Software) (× 1) Lens cap (× 1)

Optional accessories

Ceiling mount bracket

ET-PKD120H (for high ceilings)

ET-PKD120S (for low ceilings) Bracket assembly Replacement lamp unit Replacement filter unit

ET-PKE300B (for ET-PKD120H/PKD120S)

ET-LAEF100

ET-RFF200 Early Warning Software ET-SWA100series Digital Interface Box ET-YFB100G DIGITAL LINK Switcher ET-YFB200G Wireless module D-SUB - S Video conversion cable

ET-WML100

ET-ADSV

x 15-11/16 in ) with supplied lens

Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.

1 When the standby mode is set to eco, network functions such as power on over the LAN network will not operate, and the serial output termi-

nal cannot be used. Also, only certain commands can be received for external control using the serial terminal. Only Taiwan model, 0.15 W.

2 Measurement, measuring conditions, and method of notation all comply with

legs at shortest position.

3 With

4 Average value. May differ depending on models.

5 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when used at altitudes between 1,400 m and 2,700 m (4,593 ft to 8,858 ft) above

sea level. When operating temperature exceeds 40 °C (35 °C at high altitude), lamp power may automatically switch to ECO in order to protect the projector.

6 Operation range differs depending on environments.

ISO/IEC 21118:2012 international standards.

As of March 2016 4/11

SFD16M036

+ 7 hidden pages