Panasonic PTFX400U, PT-FW430 Spec File

S P E C F I L E

Pro du c t Nu mb e r : PT-FW430

Pro du c t Na me : LCD Projector

As of M arc h 201 1. Specifications and ap peara nce are subject to change without n otice .

SFL 11M 005 -1

1 / 1 4

S PEC F ILE

PT-FW430

LCD Projector

As of March 2011

SFL11M005-1

2/14

Specifications

Main unit

Power supply
Power consumption

LCD panel Panel size

Display method
Pixels

Pixel configuration
Lens
Throw ratio
Lamp
Screen size
Colors
Brightness*

2

Center-to-corner uniformity*

2

Contrast*

2

Resolution

Scanning frequency HDMI/DVI-I (digital)

DVI-I (analog)/RGB

YPBPR (YCBCR)

Video/S-Video

Optical axis shift

Keystone correction range
Installation
Built-in speaker Size

Output power
Terminals HDMI IN

100 –240 V AC, 3.9 –1.4 A, 50/60 Hz
330 W
(0.3 W at 100 –120 V AC, 0.4 W at 220 –240 V AC when standby mode
set to eco,*19 W when standby mode set to normal, 20 W when
standby mode set to normal and audio monitor out.)

18.9 mm (0.74 inches) diagonal (16:10 aspect ratio)
Transparent LCD panel (× 3, R/G/B)
1,024,000 (1,280 × 800) × 3, total of 3,072,000 pixels
Stripe
Manual (2× zoom), manual focus F 1.7 – 2.6, f 21.6 – 43.0 mm

1.34 –2.68:1
250 W UHM lamp

0.84 –7.62 m (33 – 300 inches) diagonally, 16:10 aspect ratio
Full color (16,777,216 colors)
3,500 lumens
80%
600:1 (full on/full off)
1,280 × 800 pixels (Input signals that exceed this resolution will be
converted to 1,280 × 800 pixels.)
fH: 27.0 kHz – 68.7 kHz, fV: 24 .0 Hz – 85.0 Hz,
dot clock: 25 .2 MHz –148.5 MHz
fH: 15 .6 kHz – 91.1 kHz, fV: 24 .0 Hz – 85.1 Hz,
dot clock: 162 MHz or lower
480i (525i): fH 15.75 kHz; fV 60 Hz,
576i (625i): fH 15.63 kHz; fV 50 Hz,
480p (525p): fH 31.50 kHz; fV 60 Hz,
576p (625p): fH 31.25 kHz; fV 50 Hz,
720 (750)/60p: fH 45.00 kHz; fV 60 Hz,
720 (750)/50p: fH 37.50 kHz; fV 50 Hz,
1080 (1125)/60i: fH 33.75 kHz; fV 60 Hz,
1080 (1125)/50i: fH 28.13 kHz; fV 50 Hz,
1080 (1125)/24p: fH 27.00 kHz; fV 24 Hz,
1080 (1125)/60p: fH 67.50 kHz; fV 60 Hz,
1080 (1125)/50p: fH 56.25 kHz; fV 50 Hz
fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Vertical: ±51% from center of screen (manual),
horizontal: ±24% from center of screen (manual)
Vertical: ±30°
Ceiling/desk, front/rear (menu selection)
4 cm (1-9/16 inches) (round) × 1

5.0 W (monaural)
HDMI 19-pin × 1, Deep Color, HDCP compatible

480p (525p), 576p (625p), 720 (750)/60p, 720 (750)/50p,
1080 (1125)/60i, 1080 (1125)/50i, 1080 (1125)/24p, 1080 (1125)/60p,
1080 (1125)/50p
VGA (640 × 480) – WSXGA+(1,680 × 1,050), compatible with non­interlaced signals only, dot clock: 25.2 MHz –146.25 MHz
Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz,
32 kHz)

S PEC F ILE

PT-FW430

LCD Projector

As of March 2011

SFL11M005-1

3/14

DVI-I IN*

3

Digital

R, G, B

Y, P B (CB), PR (CR)

COMPUTER (RGB) IN

R, G, B

Y, P B (CB), PR (CR)

VIDEO IN

S-VIDEO IN

AUDIO IN 1

AUDIO IN 2

AUDIO IN 3

AUDIO OUT

SERIAL IN

LAN

WIRELESS MODULE
Power cord length
Cabinet materials
Dimensions (W × H × D)

Weight
Operation noise
Operating temperature
Operating humidity

Remote control unit

Power supply
Operation range*

6

Dimensions (W × H × D)
Weight

Supplied accessories

DVI-I 29-pin × 1
DVI 1.0 compliant, compatible with HDCP, compatible with single link
only

480p (525p), 576p (625p), 720 (750)/60p, 720 (750)/50p,
1080 (1125)/60i, 1080 (1125)/50i, 1080 (1125)/24p, 1080 (1125)/60p,
1080 (1125)/50p
VGA (640 × 480) – WSXGA+(1,680 × 1,050), compatible with non-

interlaced signals only, dot clock: 25.2 MHz –146.25 MHz
G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms;
B, R: 0.7 Vp-p, 75 ohms;
HD/VD, SYNC: high impedance, TTL (positive/negative)

NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.

Y: 1.0 Vp-p (including sync signal);
PB (CB), PR (CR): 0.7 Vp-p, 75 ohms
D-sub HD 15-pin (female) × 1
G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms;
B, R: 0.7 Vp-p, 75 ohms;
HD/VD, SYNC: high impedance, TTL (positive/negative)

NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.

Y: 1.0 Vp-p (including sync signal);
PB (CB), PR (CR): 0.7 Vp-p, 75 ohms
RCA pin × 1, 1.0 Vp-p, 75 ohms
Mini DIN 4-pin × 1, Y: 1.0 Vp-p; C: 0.286 Vp-p, 75 ohms
M3 × 1 (L, R × 1), input impedance: 22 kilohms or more
M3 × 1 (L, R × 1), 0.5 Vrms, input impedance: 22 kilohms or more
RCA × 2 (L, R × 1), 0.5 Vrms, input impedance: 22 kilohms or more
M3 × 1 (L, R × 1) (monitor out: 0– 2.0 Vrms, variable)
D-sub 9-pin (female) × 1, for external control (RS-232C compliant)
RJ-45 × 1, for network connection, 100Base-TX/10Base-T, compliant
with PJLink™
Connector for optional wireless module ET-WM200U/WM200E × 1

2.0 m (6 ft 7 in)
Molded plastic (PC + ABS)
430 mm × 125.5 mm*4× 323 mm
(16-15/16 × 4-15/16*4× 12-23/32 inches) (including the lens)
Approximately 6.0 kg (13.2 lbs)
33 dB (lamp mode: NORMAL), 29 dB (lamp mode: ECO)
0°–40°C (32°–104°F)*

5

20%– 80% (no condensation)

3 V DC (R6/LR6/AA type battery × 2)
Approximately 15 m (49 ft 3 in) when operated from directly in front of
the signal receptor
48 × 163 × 24.5 mm (1-13/32˝ × 6-5/8˝ × 31/32˝)
Approx. 117 g (4.1 oz) (including batteries)

Power cord with security lock (× 1)
Wireless remote control unit (× 1)
Batteries for remote control (AA/R6/LR6 type × 2)
Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring

and Control Software Ver. 2.5, Wireless Manager ME 5.5) (× 1)

S PEC F ILE

PT-FW430

LCD Projector

As of March 2011

SFL11M005-1

4/14

Weights and dimensions shown are approximate. Specifications subject to change without notice.
*

1 When the standby mode is set to ECO, network functions such as power on over the LAN network will not operate. Also, only certain com-

mands can be received for external control using the serial terminal.

*

2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.

*

3 The DVI-I IN terminal also accepts analog signals.

*

4 With legs at shortest position.

*

5 Operation range differs depending on environments.

*

6 The operating temperature range is 0°C–35°C (32°F–95°F) when used in High-Altitude mode (1,400 m (4,593 ft) to 2,700 m (8,858 ft)).

*

7 The operation system must be pre-installed at the factory or clean installed.

Wireless Manager ME 5.5 system requirements

OS

Web browser

CPU

Memory
Free hard disk space
CD-ROM drive
Wireless LAN

Wired LAN connector

Optional accessories

Replacement lamp unit
Replacement filter unit
Ceiling mount bracket

Wireless module

To use network functions, a PC is required that meets the conditions
given below.
Microsoft

®

Windows®XP: Professional 32-bit, Home Edition 32-bit, Tablet PC

Edition 2005 32-bit

Windows Vista®: Ultimate 32-bit/64-bit, Business 32-bit/64-bit, Home

Premium 32-bit/64-bit, Home Basic 32-bit/64-bit

Windows®7: Ultimate 32-bit/64-bit, Professional 32-bit/64-bit,

Home Premium 32-bit/64-bit
Apple Mac OS X*7: v10.4, v10.5, v10.6
Windows®: Internet Explorer 6.0/7.0/8.0
Mac OS: Safari 2.0/3.0/4.0
Windows®: 1 GHz or higher Intel®Pentium®III or higher, or

other compatible processor
Mac OS X: 1 GHz or higher PowerPC G4, or 1.8 GHz or higher

Intel®Core™processor
256 MB or more (512 MB or higher is recommended for Mac OS X)
60 MB or more
CD-ROM drive or DVD drive (required for installation)
The optional ET-WM200 is required.
IEEE 802.11b/g/n compatible (built-in wireless LAN system or external
IEEE 802.11b/g/n LAN card must be installed and running normally.)

NOTE: Wireless connection may not be possible with some IEEE 802.11b/g/n wireless

LAN systems. Macintosh computers must have a built-in wireless LAN adapter.
For IEEE 802.11n connection, use a wireless LAN adapter, projector and access
point that are IEEE 802.11n compatible, and connect with Infrastructure mode.

RJ-45

ET-LAF100A
ET-EMF100
ET-PKF110H (for high ceilings)
ET-PKF110S (for low ceilings)
ET-WM200U (for North America)
ET-WM200E (for Europe and Asia)

323

53

228.5

430

(2-3/32)

(9)

(16-15/16)

11510.5

125. 5

71

(12-23/32)

(4-17/32)(13/32)

(4-15/16)

(2-25/32)

Dimensions

unit : mm (inch)
NOTE: This illustration is not drawn to scale.

S PEC F ILE

PT-FW430

LCD Projector

As of March 2011

SFL11M005-1

5/14

Terminals

AC IN

AUDIO IN

AUDIO IN 3

VARIABLE
AUDIO OUT

RL

MAIN

POWER

COMPUTER IN

S-VIDEO IN

DVI-I IN

IN

LAN

SERIAL IN

VIDEO

IN

OFF ON

1

7891011

23456

1 LAN connector
2 HDMI input
3 DVI-I input
4 Computer input
5 S-Video input
6 Video input
7 Serial input
8 Audio input 1
9 Audio input 2
10 Audio input 3
11 Audio out put