Panasonic PT-FW100NTEA User Manual
PT-FW100NTEA
LCD Projector
Long-Lasting
Brightness
With its outstanding flexibility, the
PT-FW100NTEA makes an ideal
replacement for existing ceilingmounted systems. It requires little
maintenance after installation, so
total cost of ownership is low.
A Bright Choice for
New Installations and
Replacement Use
Auto Rolling Filter (ARF) and Anti-Dust Design
A Micro Cut Filter, a high-efficiency electrostatic
filter, with superior dust-collecting performance
combines with Panasonic’s original Auto Rolling
Filter and anti-dust design to minimise brightness
loss due to dust accumulation. The Auto Rolling Filter periodically
winds the used section into the casing so that a fresh section of filter
is exposed. Thus, peak performance is maintained. In developing the
anti-dust design, Panasonic totally re-engineered the airflow path, from
intake to exhaust, to create a cabinet that hermetically seals off the
projector interior. This design and the Auto Rolling Filter team up to
keep the air inside the projector dust-free at all times.
New Drive System for Optimal Lamp Performance
Lamps used in a projector require much higher precision than ordinary
household lamps. Panasonic employs a number of new technologies—
including a new drive system—that help maintain optimal lamp performance for longer-lasting brightness.
ARF unit
ARF unit
Micro Cut Filter
A high-efficiency electrostatic filter in the air intake section
traps dust particles that are 1 microns* or larger. By capturing approximately 7 times as much dust as our previous
filters, it guards against optical blocks and reduces the
penetration of dust into the interior to provide stable operation by preventing drops in brightness.
Size of particles
1
A DVANCED T ECHNOLOGIES THAT M AINTAIN H IGH
B RIGHTNESS OVER A L ONGER S ERVICE L IFE
100
0.5
0.05
0.01
(micrometer)
10
Dust
1
Dead
mite
Pollen
25–50 µm
Mould
2.5–20 µm
Bacteria
Virus
up t o 0.25 µm
Loading...