Panasonic PT-DW730S, PT-DW730LS, PT-DW730LK, PT-DW730K Product Sheet

S P E C F I L E

The PT-DW7 30L S and PT- DW 730 LK are not equ ip ped with a len s.

Pro du c t Nu mb e r : PT-DW730S/DW730K

PT-DW730LS/DW730LK

Pro du c t Na me : DLP

As of J une 201 1. Specifications and appearance are subject to change without not ice.

SFD 11M 001

™

Projectors

1 / 1 5

S P E C F I L E

DLP™Projectors

PT-DW730S/DW730K/DW730LS/DW730LK

Specifi cat ions

Main unit

Power supply

Power consumption 120 V AC, 60 Hz

220 – 240 V AC, 50/60 Hz

DLP™ chip Panel size

Display method Pixels

Lens PT-DW730S/DW730K

PT-DW730LS/DW730LK Lamp Screen size

Brightness* Center-to-corner uniformity* Contrast* Resolution

Scanning frequency DVI-D

Optical axis shift Keystone correction range Installation Terminals DVI-D IN

RGB

YPBPR (YCBCR)

Video/S-Video

RGB 1 IN

R, G, B

Y, PB, PR (Y, CB, CR )

120 V AC, 7.5 A, 50/60 Hz 220 – 240 V AC, 4.3 A, 50/60 Hz 790 W (830 VA) (0.2 W with standby mode set to eco*1, 8Wwith standby mode set to normal. Both with fan stopped.) 760 W (950 VA) (0.3 W with standby mode set to eco*1, 9 W with standby mode set to normal. Both with fan stopped.)

16.5 mm (0.65 in) diagonal (16:10 aspect ratio) DLP™ chip × 1, DLP™ system 1,024,000 (1,280 × 800) × 1, total of 1,024,000 pixels Powered zoom/focus lenses (1.8 –2.5:1), F 1.7–1.9, f 25.6 – 35.7 mm Optional powered zoom/focus lenses and fixed-focus lens 300 W (max. 310 W) UHM lamps (× 2) (dual lamp system)

1.27–15.24 m (50–600 inches) (1.27–5.08 m (50–200 inches) with the ET-DLE055), 16:10 aspect ratio 7,000 lumens (dual lamp, lamp mode: high) 90% 2,500:1 (full on/full off, contrast mode: high, brightness: 3,500 lumens) 1,280 × 800 pixels (Input signals that exceed this resolution will be converted to 1,280 × 800 pixels.) fH: 15 kHz–91 kHz, fV:50Hz– 85 Hz, dot clock: 162 MHz or lower fH: 15 kHz – 91 kHz, fV:50Hz– 85 Hz, dot clock: 150 MHz or lower 480i (525i): fH 15.75 kHz; fV 60 Hz, 576i (625i): fH 15.63 kHz; fV 50 Hz, 480p (525p): fH 31.50 kHz; fV 60 Hz, 576p (625p): fH 31.25 kHz; fV 50 Hz, 720 (750)/60p: fH 45.00 kHz; fV 60 Hz, 720 (750)/50p: fH 37.50 kHz; fV 50 Hz, 1035/60i: fH 33.75 kHz; fV 60 Hz, 1080 (1125)/60i: fH 33.75 kHz; fV 60 Hz, 1080 (1125)/50i: fH 28.13 kHz; fV 50 Hz, 1080/25p: fH 28.13 kHz; fV 25 Hz, 1080/24p: fH 27.00 kHz; fV 24 Hz, 1080/24sF: fH 27.00 kHz; fV 48 Hz, 1080/30p: fH 33.75 kHz; fV 30 Hz, 1080/60p: fH 67.50 kHz; fV 60 Hz, 1080/50p: fH 56.25 kHz; fV 50 Hz fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60] fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] Vertical: +60% (powered), horizontal: ±10% (powered) Vertical: ±40° (±30° with the ET-DLE055 and ET-DLE080) Ceiling/floor, front/rear DVI-D 24-pin × 1, DVI 1.0 compliant, HDCP compatible, for single link only

480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, VGA (640 × 480) – WUXGA*3(1,920 × 1,200), compatible with non-

interlaced signals only, dot clock: 25–162 MHz BNC × 5 R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD/VD, SYNC: High impedance, TTL (positive/negative)

NOT E: HD/S YNC , and VD term ina ls do not acc ept tri- level sync signa ls .

Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms

As of J une 201 1

SFD11M 001

2 / 1 5

S P E C F I L E

DLP™Projectors

PT-DW730S/DW730K/DW730LS/DW730LK

RGB 2 IN

R, G, B

B, PR (Y, CB, CR )

Y, P VIDEO IN S-VIDEO IN SERIAL IN SERIAL OUT REMOTE 1 IN REMOTE 1 OUT REMOTE 2 IN LAN

Power cord length Cabinet materials Dimensions (W × H × D) PT-DW730S/DW730K

PT-DW730LS/DW730LK

Weight PT-DW730S/DW730K

PT-DW730LS/DW730LK

Operation noise*

Operating temperature Operating humidity

D-sub HD 15-pin × 1 R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD/VD, SYNC: High impedance, TTL (positive/negative)

NOT E: HD/S YNC , and VD term ina ls do not acc ept tri- level sync signa ls .

Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms BNC × 1, 1.0 Vp-p, 75 ohms Mini DIN 4-pin × 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms D-sub 9-pin × 1 for external control (RS-232C compliant) D-sub 9-pin × 1 for link control (RS-232C compliant) M3 jack × 1 for wired remote control M3 jack × 1 for link control D-sub 9-pin × 1 for external control (parallel) RJ-45 × 1 for network connection, 100Base-TX/10Base-T, compliant with PJLink™

3.0 m (9 ft10 in) Molded plastic 498 mm × 175 mm*4× 466 mm*5(19-19/32˝ × 6-7/8˝ *4× 18-11/32˝ *5) (with supplied lens) 498 mm × 175 mm*4× 432 mm*5(19-19/32˝ × 6-7/8˝ *4× 17˝ *5) (without lens) Approx. 16.3 kg (35.9 lbs) (with supplied lens) Approx. 15.4 kg (34.0 lbs) (without lens) 39 dB (lamp mode: high), 35 dB (lamp mode: normal) 0°– 45°C (32°–113°F)*

20%– 80% (no condensation)

Remote control unit

Power supply Operation range*

Dimensions (W × H × D) Weight

Supplied accessories

Optional accessories

Zoom lens (0.8–1.0:1) Zoom lens (1.4–2.0:1) Zoom lens (2.4 – 3.8:1) Zoom lens (3.8 – 5.7:1) Zoom lens (5.6 – 9.0:1) Fixed-focus lens (0.8:1) Ceiling mount bracket

Replacement lamp unit

Replacement filter unit

3 V DC (R6/AA type battery × 2) Approx. 30 m (98 ft5 in) when operated from directly in front of the signal receptor 51 × 176 × 23 mm (2˝ × 6-15/16˝ × 29/32˝) Approx. 134 g (4.7 oz) (including batteries)

Power cord (× 1) Power cord security lock (× 1) Wireless/wired remote control unit (× 1) Batteries for remote control (R6/AA type × 2)

ET-DLE080 ET-DLE150 ET-DLE250 ET-DLE350 ET-DLE450 ET-DLE055 ET-PKD56H (for high ceilings) ET-PKD55S (for low ceilings) ET-LAD60A ET-LAD60AW (Twin Pack) ET-EMF300

Wei ght s and dime nsi on s sho wn are appro xi ma te. Spec ifica ti ons and app ea ran ce are subj ec t to cha nge with ou t noti ce . *1 Whe n the stan dby mode is set to eco, netw or k func ti on s such as powe r on ove r the LAN netw ork wi ll not ope rat e, and the se ri al out pu t termi-

nal cann ot be used . Also , onl y cer tai n com mands can be receiv ed for exte rn al cont rol usin g the ser ia l termin al . *2 Measu remen t, me as uri ng cond iti on s, an d met hod of nota tion all comp ly wit h ISO 2111 8 inte rn at ional stan dar ds . *3 WUX GA resol ut io n is supp or te d only when the sign al s are com pl ia nt wit h VES A CVT-RB (Coo rdi na ted Vide o Timi ng -R edu ce d Bla nki ng ). *4 Wit h leg s at sho rte st posi tio n. *5 Pro tr udi ng part s not inc lu de d. *6 The oper at ing temp er atu re ra ng e is 0°C to 40° C (32 °F to 104 °F ) whe n the fan cont rol is set to Hig h Alti tu de mo de (f or al ti tud es from 1,4 00 m to

2,7 00 m (4, 59 3 ft to 8,858 ft) abov e sea lev el ). Al so , if the amb ie nt te mpera tu re exc ee ds 40 °C (1 04° F) (35° C (95° F) in High Al titud e mod e) whe n

the proj ect or is bein g used with Lamp Se lect set to Dual an d Lam p Powe r set to High , the lig ht outpu t may be reduc ed appro xi ma tel y 20% to

pro te ct the proj ect or. *7 Ope ra ti on ran ge diffe rs depe ndi ng on envi ron me nts .

As of J une 201 1

SFD11M 001

3 / 1 5

S PEC F ILE

2 3 45

DLP™Projectors

Dimensions

423 (16-21/32)

466 (18-11/32)

9 (11/32)

43 (1-11/16)

PT-DW730S/DW730K/DW730LS/DW730LK

unit : mm (inch) NOTE: This illustration is not drawn to scale. The illustration shows the PT-DW730S/DW730K.

155 (6-3/32)

77.5

(3-1/16)20 (25/32)

175 (6-7/8)

416 (16-3/8)

498 (19-19/32)

21 (13/16)

Terminals

G/Y

R/P

S-VIDEO IN

VIDEO IN RGB1 IN RGB2 IN DVI-D I N

LAN

IN OUT

REMOTE 1 REMOTE 2

6 78 9 10 11

B/P

IN OUT SERIAL

SYNC/HD

1 Video input

2 S-Video input

3 RGB 1 input

4 RGB 2 Input

5 DVI-D input

7 Remote 1 input

8 Remote 1 output

9 Remote 2 input

10 Serial input

11 Serial output

6 LAN connector

As of June 2011

SFD11M001

4/15

S PEC F ILE

DLP™Projectors

Standard setting-up position

Upper edge of projected image

Projected image

Lower edge of projected image

Projected image

PT-DW730S/DW730K/DW730LS/DW730LK

*1 When the lens protrudes to the maximum.

(13-3/8–

340–420

16-17/32)

416–496

(6-10/16)

168

100 (3-15/16)

400

(15-3/4)

255 (10-1/32)

100

(3-15/16)

A: 84 mm (3-5/16˝) with the ET-DLE080

43 mm (1-11/16˝ ) with the supplied lens 44 mm (1-23/32˝) with the ET-DLE150 45 mm (1-25/32˝) with the ET-DLE250 51 mm (2˝ ) with the ET-DLE350

(16-3/8–

344

(13-17/32)

95 mm (3-3/4˝ ) with the ET-DLE450

19-17/32)

27 mm (1-1/16˝) with the ET-DLE055

*2 Adjustable in 40 mm (1-9/16˝) steps.

NOTE:

Illustrations show the projector installed using optiona ET-PKD56H and an optional lens.

This illustration is not drawn to scale.

l ceiling mount bracket

unit : mm (inch)

Caution:

• All construction work should be done by a qualified technician.

• When mounting to the ceiling, use the special mounting bracket. To prevent the projector from swaying or dropping, attach the wire between the mounting bracket and the ceiling.

As of June 2011

SFD11M001

5/15

+ 10 hidden pages