Panasonic PT-DW7000 User Manual

< 1 >
S PEC F ILE
Product Number : PT-DW7000
Product Name : 3-Chip DLP™ Projector
As of February 2009. Appearance and specifications are subject to change without notice.
S PEC F ILE
PT-DW7000
As of February 2009 < 2 >

Specifications

Main Unit
Power supply: North America:
Europe, Asia
Power consumption:
DLP™ chip: Panel size:
Display method:
Pixels:
Lens:
Lamp:
Screen size:
Brightness*
1
:
Center-to-corner uniformity*1:
Contrast*1:
Resolution:
Scanning frequency: RGB:
YPBPR (YCBCR):
S-Video/Video:
Optical axis shift*: Vertical:
Horizontal:
Keystone correction range:
Installation:
Terminals: RGB1 IN:
R, G, B:
Y, P B, PR
RGB2 IN:
R, G, B:
Y, P B, PR
120 V AC, 20 A, 60 Hz
220–240 V AC, 15 A, 50/60 Hz
800 W (800 VA)(North America: 12 W in standby mode with fan
stopped, Europe: 15 W in standby mode with fan stopped)
0.85˝ diagonal (16:9 aspect ratio)
DLP™ device x 3 (R, G, B), DLP™ projection system
1,049,088 (1,366 x 768) x 3, total of 3,147,264 pixels
Optional powered zoom/focus lenses
300 W UHM lamp x 2
70– 600 inches, 16:9 aspect ratio
(70 – 300 inches with the ET-D75LE5, 16:9 aspect ratio)
6,000 lumens (four-lamp operation mode)
90%
4,000:1 (full on/full off, in dynamic iris 3 mode)
1,300:1 (full on/full off, with dynamic iris off)
1,366 x 768 pixels (Input signals that exceed this resolution will be
converted to 1,366 x 768 pixels.)
Horizontal: 15–100 kHz, Vertical: 24– 120 Hz*
2
,
Dot clock: 20–162 MHz
480i: fH 15.75 kHz; fV 60 Hz, 576i: fH 15.63 kHz; fV 50 Hz,
480p: fH 31.50 kHz; fV 60 Hz, 576p: fH 31.25 kHz; fV 50 Hz,
720/60p: fH 45.00 kHz; fV 60 Hz, 1035/60i: fH 33.75 kHz; fV 60 Hz,
1080/60i: fH 33.75 kHz; fV 60 Hz, 1080/50i: fH 28.13 kHz; fV 50 Hz,
1080/25p: fH 28.13 kHz; fV 25 Hz, 1080/24p: fH 27.00 kHz; fV 24 Hz,
1080/24sF: fH 27.00 kHz; fV 48 Hz,
1080/30p: fH 33.75 kHz; fV 30 Hz
Horizontal: 15.75/15.63 kHz, Vertical: 50/60 Hz,
(NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM)
±70% (±60% with the ET-D75LE6) from center of screen, powered
±30% from center of screen, powered
Vertical: ±40° (±34° with the ET-D75LE1, ±19° with the ET-D75LE5,
±28° wih the ET-D75LE6)
Ceiling/floor, front/rear
BNC x 5
G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms,
B, R: 0.7 Vp-p, 75 ohms
HD, VD, SYNC: 1.4–5.0 Vp-p, positive/negative automatic
Y: 1.0 p-p, 75 ohms (incl. sync signal), PB/PR: 0.7 Vp-p, 75 ohms
0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms
D-sub HD 15-pin (female) x 1
G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms,
B, R: 0.7 Vp-p, 75 ohms
HD, VD, SYNC: TTL, positive/negative automatic
Y: 1.0 p-p, 75 ohms (incl. sync signal), PB/PR: 0.7 Vp-p, 75 ohms
0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms
S PEC F ILE
PT-DW7000
As of February 2009 < 3 >
VIDEO IN:
VIDEO OUT:
S-VIDEO IN:
SERIAL IN*
4
:
SERIAL OUT*4:
REMOTE 1 IN:
REMOTE 1 OUT:
REMOTE 2 IN:
Optional board slot*5:
With ET-MD77SD1 installed: SERIAL IN:
SERIAL OUT:
LAN:
With ET-MD77SD3 installed: SERIAL IN:
SERIAL OUT:
LAN:
With ET-MD77DV installed: DVI-D IN:
With ET-MD77NT installed: LAN:
Power cord:
Cabinet material:
Dimensions (W x H x D):
Weight:
Operating temperature*6:
Operating humidity:
Remote Control Unit
Number of functions:
Power supply:
Operation range*7:
Dimensions (W x H x D):
Weight:
BNC x 1, 1.0 Vp-p, 75 ohms
BNC x 1, 1.0 Vp-p, 75 ohms, active through
Mini DIN 4-pin x 1
Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
D-sub 9-pin (female) x 2, for external control (RS-232C/RS-422 compli-
ant)
D-sub 9-pin (male) x 1, for link control
M3 jack x 1 for wired remote control
M3 jack x 1 for link control
D-sub 9-pin (female) x 1 for external control (parallel)
x 1
BNC x 1, SD-SDI signal (4:2:2), SMPTE 259M compliant, 480i, 576i
BNC x 1, active through
RJ-45 x 1, for network connection, 10Base-T/100Base-TX
BNC x 1
SD-SDI signal (4:2:2): SMPTE 259M compliant, 480i, 576i
Single-link HD-SDI signal (YPBPR 4:2:2 10-bit): SMPTE 292M compiant,
720/50p, 720/60p, 1080/50i, 1080/60i, 1080/25p, 1080/24p,
1080/24sF, 1080/30p
BNC x 1, active through
RJ-45 x 1, for network connection, 10Base-T/100Base-TX
DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP, compati-
ble with single link only
EDID1: 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p,
1080/24sF, 1080/25p, 1080/30p
EDID2: Compatible with non-interlaced signals only,
Effective resolution: VGA (640 x 480) – U-XGA (1,600 x 1,200),
Dot clock: 25–162 MHz
RJ-45 x 1, for network connection, 10Base-T/100Base-TX
2.5 m/8´2˝
Moulded plastic
530 x 200 x 569 mm (20-7/8˝ x 7-7/8˝ x 22-13/32˝) (without lens)
22 kg (48.5 lbs) or less (without lens)
0°–40°C (32°–104°F)
10%–80% (no condensation)
32 keys, 46 functions
3 V DC (AA battery x 2)
Wireless: Approx. 7 m/23´ when operated from directly signal receptor
Wired: Approx. 15 m/49´3˝
50 x 31 x 181 mm (1-31/32˝ x 1-7/32˝ x 7-1/8˝)
110 g (3.9 oz) (including batteries)
S PEC F ILE
PT-DW7000
As of February 2009 < 4 >
Weights and dimensions shown are approximate. Specifications subject to change without notice. *1 Values indicate overall average values of the product at the time of shipment and are stated based on JIS X 6911:2003 Data Projector
Specification Sheet Format. Measurement method and conditions are based on Appendix 2. *2 Smooth image reproduction may not be possible when a motion video signal with a vertical frequency other than 50 or 60 Hz is input. *3 Shift range is limited during simultaneous horizontal and vertical shifting. *4 Contact your dealers for details when the control using RS-232C or RS-422 is required. *5 The LAN terminal on the optional board will be inactivated after installation. Use the LAN terminal on the main unit. *6 Operating temperature is 0°C– 40°C (32°F–104°F) when the fan control is set to “HIGHLAND” (for over 1,400 m to 2,700 m above sea level). *7 Operation range differs depending on environments.
Supplied Accessories
Optional Accessories
Zoom lens (1.0–1.2:1):
Zoom lens (1.5–2.0:1):
Zoom lens (2.1–3.1:1):
Zoom lens (3.1–5.2:1):
Zoom lens (5.2–8.2:1):
Zoom lens (8.2–15.4:1):
Fixed-focus lens (0.8:1):
SD-SDI board:
HD/SD-SDI board:
DVI-D board:
Network board:
Wireless mouse receiver
Replacement lamp unit
Replacement long-life lamp unit
Ceiling mount bracket for high ceilings
Ceiling mount bracket for low ceilings
Dual stacking mount bracket
Carrying handle
Power cord, wireless/wired remote control, AA batteries for remote
control (x 2), remote control cable (15 m/49´3˝)
ET-D75LE6
ET-D75LE1
ET-D75LE2
ET-D75LE3
ET-D75LE4
ET-D75LE8
ET-D75LE5
ET-MD77SD1
ET-MD77SD3
ET-MD77DV
ET-MD77NT
ET-RMRC2
ET-LAD7700 (one bulb)
ET-LAD7700W (a set of two bulbs)
ET-LAD7700L (one bulb)
ET-LAD7700LW (a set of two bulbs)
ET-PKD77H
ET-PKD75S
ET-DFD75
ET-HAD75
Loading...
+ 8 hidden pages