S PEC F ILE
DLP™Projectors
PT-DW640K/DW640S/DW640LK/DW640LS
Specifications
Main unit
Power supply
Power consumption 120 V AC, 50/60 Hz
220–240 V AC, 50/60 Hz
DLP™ chip Panel size
Display method
Pixels
Lens PT-DW640K/DW640S
PT-DW640LK/DW640LS
Lamp
Screen size
Brightness*
Center-to-corner uniformity*
Contrast*
Resolution
Scanning frequency HDMI/DVI-D
Optical axis shift
Keystone correction range
Installation
Terminals HDMI IN
2
2
2
RGB
PR(YCBCR)
YPB
Video/S-Video
DVI-D IN
120 V AC, 6.8 A, 50/60 Hz
220–240 V AC, 3.8 A, 50/60 Hz
710 W (740 VA) (0.2 W with STANDBY MODE set to ECO*1, 6 W with
STANDBY MODE set to NORMAL)
690 W (860 VA) (0.3 W with STANDBY MODE set to ECO*1, 8 W with
STANDBY MODE set to NORMAL)
16.5 mm (0.65 in) diagonal (16:10 aspect ratio)
DLP™ chip × 1, DLP™ system
1,024,000 (1,280 × 800) × 1, total of 1,024,000 pixels
Powered zoom/focus lenses (1.8–2.4:1), F 1.7–2.0, f 25.6– 33.8 mm
Optional powered zoom/focus lenses and fixed-focus lens
280 W UHM lamps (× 2) (dual lamp system)
1.27–15.24 m (50 – 600 inches) (1.27– 5.08 m (50– 200 inches) with the
ET-DLE055), 16:10 aspect ratio
6,000 lumens (dual lamp,
LAMP MODE: NORMAL
)
90%
2,000:1 (full on/full off,
CONTRAST MODE: HIGH
, brightness: 3,000 lumens)
1,280 × 800 pixels
H: 15 – 91 kHz, fV : 50 – 85 Hz, dot clock: 25 –162 MHz
f
: 15 – 91 kHz, fV: 50 – 85 Hz, dot clock: 162 MHz or lower
fH
525i (480i): fH15.75 kHz; fV60 Hz,
625i (576i): fH15.63 kHz; fV50 Hz,
525p (480p): f
H 31.50 kHz; fV 60 Hz,
625p (576p): fH31.25 kHz; fV50 Hz,
H
750 (720) / 60p: f
45.00 kHz; fV60 Hz,
750 (720) / 50p: fH37.50 kHz; fV50 Hz,
1125 (1035)/60i: fH33.75 kHz; fV60 Hz,
1125 (1080) / 60i: f
H 33.75 kHz; fV 60 Hz,
1125 (1080) / 50i: fH 28.13 kHz; fV 50 Hz,
1125 (1080) / 25p: fH
28.13 kHz; fV25 Hz,
1125 (1080) / 24p: fH27.00 kHz; fV24 Hz,
1125 (1080) / 24sF: fH27.00 kHz; fV48 Hz,
H
1125 (1080) / 30p: f
33.75 kHz; fV30 Hz,
1125 (1080) / 60p: fH 67.50 kHz; fV 60 Hz,
1125 (1080) / 50p: fH
56.25 kHz; fV50 Hz
fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Vertical: +60% (powered), horizontal: ±10% (powered)
NOTE: Optical axis shift function cannot be operated when used with the ET-DLE055.
Vertical: ±40° (±30° with the ET-DLE055 and ET-DLE080)
Ceiling/floor, front/rear
HDMI 19-pin × 1, Deep Color, HDCP compatible
525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p,
1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/25p, 1125 (1080)/24p,
1125 (1080)/24sF, 1125 (1080)/30p, 1125 (1080)/60p, 1125 (1080)/50p
3
VGA (640 × 480) – WUXGA*
(1,920 × 1,200), compatible with non-
interlaced signals only, dot clock: 25–162 MHz
DVI-D 24-pin × 1, DVI 1.0 compliant, HDCP compatible, for single link only
525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p,
1125(1080)/60i, 1125(1080)/50i, 1125 (1080)/25p, 1125 (1080)/24p,
1125 (1080)/24sF, 1125 (1080)/30p, 1125 (1080)/60p, 1125 (1080)/50p
VGA (640 × 480) – WUXGA*
3
(1,920 × 1,200), compatible with non-
interlaced signals only, dot clock: 25–162 MHz
As of November 2012
SFD12M015
2/17
S PEC F ILE
DLP™Projectors
PT-DW640K/DW640S/DW640LK/DW640LS
RGB 1 IN
R, G, B
, PR(Y, CB, CR)
B
Y, P
RGB 2 IN
R, G, B
B, PR (Y, CB, CR)
Y, P
VIDEO IN
S-VIDEO IN
SERIAL IN
SERIAL OUT
REMOTE 1 IN
REMOTE 1 OUT
REMOTE 2 IN
LAN
Power cord length
Cabinet materials
Dimensions (W × H × D) PT-DW640K/DW640S
PT-DW640LK/DW640LS
Weight PT-DW640K/DW640S
PT-DW640LK/DW640LS
Operation noise*
2
Operating temperature
Operating humidity
BNC × 5
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD/VD, SYNC: TTL, high impedance, positive/negative automatic
NOTE: HD/SYNC, and VD terminals do not accept tri-level sync signals.
Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms
D-sub HD 15-pin × 1
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD/VD, SYNC: TTL, high impedance, positive/negative automatic
NOTE: HD/SYNC, and VD terminals do not accept tri-level sync signals.
Y: 1.0 Vp-p (including sync signal), PB/PR (CB /CR): 0.7 Vp-p, 75 ohms
BNC × 1, 1.0 Vp-p, 75 ohms
Mini DIN 4-pin × 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
D-sub 9-pin × 1 for external control (RS-232C compliant)
D-sub 9-pin × 1 for link control (RS-232C compliant)
M3 jack × 1 for wired remote control
M3 jack × 1 for link control
D-sub 9-pin × 1 for external control (parallel)
RJ-45 × 1 for network connection, 100Base-TX/10Base-T, compliant
with PJLink™
3.0 m (9 ft 10 in)
Molded plastic
498 × 175*4× 440 mm
(19-19/32 × 6-7/8*4× 17-5/16 inches) (with supplied lens)
498 × 175*
(19-19/32 × 6-7/8*
4
× 432 mm
4
× 17 inches) (without lens)
Approx. 16 kg (35.3 lbs) (with supplied lens)
Approx. 15.1 kg (33.3 lbs) (without lens)
35 dB (dual lamp operation,
LAMP MODE: NORMAL
29 dB (dual lamp operation, LAMP MODE
0–45 °C (32–113 °F) *
5
:
ECO
),
)
20%–80% (no condensation)
Remote control unit
Power supply
Operation range*
6
Dimensions (W × H × D)
Weight
3 V DC (R6/AA type battery × 2)
Approx. 30 m (98 ft 5 in) when operated from directly in front of the
signal receptor
51 × 176 × 23 mm (2 × 6-15/16 × 29/32 inches)
Approx. 134 g (4.7 oz) (including batteries)
As of November 2012
SFD12M015
3/17
S PEC F ILE
DLP™Projectors
Supplied accessories
Optional accessories
Zoom lens (0.8–1.0:1)
Zoom lens (1.4–2.0:1)
Zoom lens (2.4–3.8:1)
Zoom lens (3.8–5.7:1)
Zoom lens (5.6–9.0:1)
Fixed-focus lens (0.8:1)
Ceiling mount bracket
Replacement lamp unit
Replacement filter unit
PT-DW640K/DW640S/DW640LK/DW640LS
Power cord (× 1) (x 2 for DW640EK/DW640ES/DW640ELK/DW640ELS)
Power cord security lock (× 1)
Wireless/wired remote control unit (× 1)
Batteries for remote control (R6/AA type × 2)
Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring
& Control Software) (× 1)
ET-DLE080
ET-DLE150
ET-DLE250
ET-DLE350
ET-DLE450
ET-DLE055
ET-PKD56H (for high ceilings)
ET-PKD55S (for low ceilings)
ET-LAD60A
ET-LAD60AW (Twin Pack)
ET-EMF300
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
1 When the
*
cannot be used. Also, only certain commands can be received for external control using the serial terminal.
2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*
3 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
*
4 With legs at shortest position.
*
5 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the fan control is set to High Altitude mode (for altitudes from 1,400 m
*
to 2,700 m (4,593 ft to 8,858 ft) above sea level). Also, if the ambient temperature exceeds 40 °C (104 °F) (35 °C (95 °F) in High Altitude mode)
when the projector is being used with Lamp Select set to Dual and Lamp Power set to High, the light output may be reduced approximately
20% to protect the projector.
6 Operation range differs depending on environments.
*
As of November 2012
SFD12M015
STANDBY MODE is set to ECO, network functions such as power on over the LAN network will not operate, and the serial output terminal
4/17
S PEC F ILE
DLP™Projectors
Standard setting-up position
Upper edge of projected image
HH
Projected image
Lower edge of projected image
L
Projected image
PT-DW640K/DW640S/DW640LK/DW640LS
2
*
(13-3/8–
340–420
16-17/32)
L
1
A*
(6-5/8)
L
168
100
(3-15/16)
400
(15-3/4)
255
(10-1/32)
100
(3-15/16)
*1 When the lens protrudes to the maximum.
A: 84 mm (3-5/16˝) with the ET-DLE080
17 mm (43/64˝ ) with the supplied lens
44 mm (1-23/32˝) with the ET-DLE150
45 mm (1-25/32˝) with the ET-DLE250
(16-3/8–
416–496
344
51 mm (2˝) with the ET-DLE350
19-17/32)
95 mm (3-3/4˝) with the ET-DLE450
27 mm (1-1/16˝) with the ET-DLE055
*2 Adjustable in 40 mm (1-9/16˝) steps.
(13-17/32)
NOTE:
Illustrations show the projector installed
using optional ceiling mount bracket
ET-PKD56H and an optional lens.
This illustration is not drawn to scale.
unit : mm (inch)
Caution:
• All construction work should be done by a qualified technician.
• When mounting to the ceiling, use the special mounting bracket.
Furthermore, in order to prevent it from falling down from the ceiling, use the supplied wire on the mounting bracket.
As of November 2012
SFD12M015
6/17