Panasonic MC-UL810-00 Servise Manual
Vacuum Cleaner
MC-UL810-00
Order Number MAC1106001CE
Specifications are subject to change without notice for further improvement.
© 2011 PANASONIC CONSUMER ELECTRONICS
COMPANY, DIVISION OF PANASONIC
CORPORATION OF NORTH AMERICA. All rights
MC-UL810-00
CONTENTS
Page Page
1 WIRING DIAGRAM AND DRAWING 3
1.1. Wiring Diagram
1.2. Wire Management Drawing
2 EXPLODED VIEW AND PARTS LIST
2.1. Body
2.2. Nozzle Housing
3
4
5
5
7
2.3. Dust Bin Assembly
2.4. Packing Materials
3 SERVICE PROCEDURES
3.1. CORD REEL
3.2. FAN MOTOR
3.3. ON/OFF SWITCH
9
11
12
12
14
15
2
1 WIRING DIAGRAM AND DRAWING
1.1. Wiring Diagram
MC-UL810-00
3
MC-UL810-00
1.2. Wire Management Drawing
NOTE:
For general servicing, it is necessary to eliminate pinching of any wire during reassembly. After servicing any electrical
component or electrical enclosure, the unit should be reassembled and checked for dielectric breakdown or current leakage.
Use part number AC79FCWZZ000 (FIBERGLASS CLOTH TAPE) whenever original tape is removed.
4
2 EXPLODED VIEW AND PARTS LIST
2.1. Body
2.1.1. Exploded View
MC-UL810-00
5
Loading...