Panasonic MC-CL483K, MC-CL481K User Manual
Operating Instructions
Vacuum Cleaner
Model No.
MC-CL481K
MC-CL483K
We would recommend that you carefully study these Operating Instructions before attempting to
operate the unit, and that you note the Important Safety Instructions.
Keep pages 3 and 8 open when reading this manual, to make easier identify the different parts of
the product.
.
.
.
.
TABLE OF CONTENTS / /
• Important safety instructions for the user
A) Identification of main parts
B) How to assemble your cleaner
.................................................... 4
............................................... 4
Page / /
............................... 2
...............................
...............................
...............................
...............................
...............................
...............................
C) How to operate your cleaner
D) Maintenance and Servicing
• Specifications
............................................................................. 9
................................................... 5
..................................................... 6
Page / /
...............................
...............................
...............................
...............................
...............................
...............................
IMPORTANT SAFETY INSTRUCTIONS FOR THE USER
Before using the vacuum cleaner, please observe these basic precautions.
WARNING: To reduce the risk of fire, electric shock, or injury.
.
:.
.
:.
• This appliance is not intended for use by infirm persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
• Do not use the appliance if the power cord or plug is damaged or faulty.
• This appliance is provided with a flexible cord and if this becomes damaged, it must be repaired by an Authorized Service Centre or a qualified person in order
to avoid any hazard.
• Unplug from the socket outlet when not in use and before cleaning the appliance or undertaking maintenance operations.
• Turn off the appliance before removing the plug. Do not pull on the power cord, always pull on the plug body itself.
• Do not handle plug or vacuum cleaner with wet hands.
• Do not use wet filters after wash, make sure they are completely dry to avoid damaging the cleaner.
• Do not vacuum flammable or combustible substances, neither use in areas where they may be present.
• Do not vacuum hot ash, embers or large and sharp objects.
• Do not vacuum water or other liquids.
• Keep the vacuum cleaner away from heat sources such as radiators, fires, direct sunlight, etc.
• This vacuum cleaner is fitted with a thermal cut-out device which automatically turns off the cleaner to prevent overheating of the motor. When this happens,
disconnect the cleaner from the socket outlet and check the dust compartment and filters as they may be full or clogged with fine dust. Check for any other
obstructions in the hose or tube. After removing the obstruction, leave the cleaner to cool down until the thermal cut-out resets after approximately 60 minutes.
..
.
.
.
..
.
.
.
.
.
.
.
.
.
.
) (
•) (
•
•
•
•
•
•
•
•
•
•
•
•
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
•
•
•
•
•
•
•
•
•
•
•
2
A
B(a) B(b)
A A
B
B-1
D
R S
B-2
D
F
L
H
F
C
G
G
I
EH
U
T
J
K
V
M
O
P
Q
N
W
B-4
H
C
G
G
EH
C
C-1
B-3
2
K
J
1
B-5
C-2 C-3
N
L
X
A
M
M
I
N
B
A
C-4 C-5 C-6 C-7
M
3
A -
IDENTIFICATION OF MAIN PARTS /
B - HOW TO ASSEMBLE YOUR
CLEANER /
A) Floor nozzle
B) Extension wand (a) Telescopic wand (MC-CL483K)
(b) Extension wand (MC-CL481K)
C) Hose
D) Curved wand
E) Connection pipe
F) Suction regulator
G) Projection
H) Hose supporter
I) Plug
J) Crevice nozzle
K) Dusting brush
L) Switch knob button (Only MC-CL483K)
M) Cord rewind button
N) ON/OFF Switch button
O) Dust compartment buckle
P) Filter knob
Q) Hose inlet
R) Dust compartment
S) Pre-filter
T) Filter unit
U) Slider supporter
V) Slider
W) Pre-motor filter
(MC-CL K)
(MC-CL K)
(MC-CL K)
(b)
(b)
(A
(B(a)
(C
(D
(E
(F
(G
(H
(I
(J
(K
(L)MC-CL K(
(M
(N/
(O
(P
(Q
(R
(S
(T
(U
(V
(W
W (
B-1 Cleaning tools
• Crevice tool
Crevice tool is use for cleaning crevices, corners, base boards and
between cushions.
• Dusting brush
Dusting brush is use for furniture, venetian blinds and bookshelves and
have to be attached onto the crevice tool.
B-2 Insert the curved wand and connection pipe into the hose supporter at
each end of the hose until the projection clicks into the hole of the
attachment.
B-3 Insert the connection pipe into the hose inlet and turn it clockwise until
it locks in place. To disconnect the hose, turn it counter-clockwise and
then remove.
B-4 Insert the curved wand into the upper end of the extension wand and
the floor nozzle to the other end.
B-5 Hold the grip and push the knob adjuster and extend telescopic wand
to the required length. (Only MC-CL483K)
B-
•
.
•
.
.
.
.
.
.
A (
B ((a)(MC-CL K)
C (
D (
E (
F (
G (
H (
I (
J (
K (
L ()MC-CL K(
M (
N (/
O (
P (
Q (
R (
S (
T (
U (
V (
K(MC-CL
.
.
.
) .
B-
B-
B-
.
B-
) .K(MC-CL
B-
•
•
B-
B-
.
B-
B-
4
Loading...