Panasonic KX-WP1050E User Manual

Quick Start Guide

Wi-Fi Phone for Skype™

Executive Travel Set

Model No. KX-WP1050E

Contents

1. Packing the accessories ..........2

2. Installing the base unit .............2

3. Setting up the base unit ...........6

This product is designed
for use in the following
countries:

UK, Germany, France (indoor
use), USA, Canada, Japan

Thank you for purchasing a Panasonic Wi-Fi Phone for Skype
Executive Travel Set.

Please read this Quick Start Guide before using the unit and save for future
reference.

For further details, please read the Operating Instructions included in the
CD-ROM.
The Operating Instructions are in PDF format. Please note that Adobe
Reader® (6.0 or later) or Acrobat® Reader (5.0 or later) is required to view
the Operating Instructions.

4. Setting up the handset .............8

5. Menus .................................... 11

6. Managing contacts .................13

7. Making / answering calls ........15

8. Troubleshooting ......................15

®

No emergency calls: Skype is not a replacement for your ordinary
telephone and cannot be used for emergency calling.

We recommend keeping a record of the following information for
future reference.

Date of purchase

Serial No.
(found on the bottom of the base unit)

MAC address
(found on the bottom of the base unit)

Name and address of dealer

Note:

LIn the event of problems, you should contact your equipment supplier in

the fi rst instance.

Sales Department:
Panasonic Business Systems U.K.

Panasonic House, Willoughby Road, Bracknell, Berkshire, RG12 8FP

Panasonic Communications Co., Ltd.

1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan

Copyright:

This material is copyrighted by Panasonic Communications Co., Ltd.,
and may be reproduced for internal use only. All other reproduction, in
whole or in part, is prohibited without the written consent of Panasonic
Communications Co., Ltd.

2007 Panasonic Communications Co., Ltd. All Rights Reserved.

©

PQQW15844ZA SJ0207SM0

1

Packing the accessories

1

2

3

j

9

Note:

LDo not include the CD-ROM when packing the

accessories in the carrying case.

LCharge the battery for 6 hours before initial use.

Trademarks:

LMicrosoft, Windows and Internet Explorer are either registered

trademarks or trademarks of Microsoft Corporation in the United States
and/or other countries.

LSkype, SkypeIn, SkypeOut and the S logo are trademarks of Skype

Limited.

LWi-Fi is a trademark of the Wi-Fi Alliance.

4

6

5

7

8

k

l

Included accessories

No. Accessory item Quantity

1

Ethernet cable (approx. 0.5 m) 1

2

Charge cable (approx. 0.5 m) 1

3

AC mains lead*1 (approx. 1.8 m) 1

4

AC adaptor for base unit (approx. 1.9 m) 1

5

Base unit (Wireless travel router) 1

6

Handset stand 1

7

Battery 1

8

Handset 1

9

Carrying case 1

j

Quick Start Guide 1

k

CD-ROM (Operating Instructions are included.) 1

l

Wireless LAN sticker*

*1

The included AC mains lead is compatible with a power source up to 250 V AC.
You might need a separate AC mains lead when you use this product in other
countries.
For USA, Canada and Japan: Part No. PQJA10188Z
For Germany and France: Part No. PFJA02A006Z

*2

Your base unit’s default network name (SSID) and network key for wireless
connection are printed. As this information is important for the base unit
settings, save this sticker in a safe place.

LAdobe, Acrobat and Reader are either registered trademarks or

trademarks of Adobe Systems Incorporated in the United States and/or
other countries.

LMozilla and Firefox are registered trademarks of the Mozilla Foundation.
LAll other trademarks identifi ed herein are the property of their respective

owners.

2

1

2

Select the appropriate installation procedure according to where you want
to use the unit.

– In a hotel room: Follow the instructions 2-A on this page.
– At home: Follow the instructions 2-B on page 4.

Installing the base unit

2-A While you are in a hotel room

You can use the handset while you are travelling by accessing the Internet
from a hotel room.
The hotel you are staying in may give you specifi c instructions as to what
Internet connection mode you should select. In that case, follow their

Mode selector

Base unit

1

3

4

AC mains lead

To AC outlet

Note:

Use only the included Panasonic AC adaptor

L

PQWEWP1050 and AC mains lead PSJA1106Y.

LYou need a separate AC mains lead when

you use this unit in USA, Canada, Japan,
Germany and France.

AC adaptor

Ethernet cable
(not included)

2

Ethernet cable (included)

Ethernet port
(RJ45 socket)

ł

Note:

LYou need to connect a computer to the base unit in order to set up the

base unit.

instructions. Otherwise, you are suggested to use [Default Profi le] when
you set the connection mode in Initialization Setup (3-A on page 6).

1

Switch the Mode selector to “HOTEL”.

2

Computer
(if necessary)

Internet

OR

Connect the included Ethernet cable to the “WAN”

port on the base unit and the Ethernet port (RJ45
socket) in the hotel room.

LIf you cannot fi nd the Ethernet port (RJ45 socket)

in the hotel room, ask the hotel front desk. In
some hotels, the wireless Internet connection
service may be available by using a wireless
Ethernet bridge prepared by the hotel.

3

Connect a separate Ethernet cable to the “LAN”

port on the base unit and the Ethernet (LAN) port
on your computer.

4

Connect the included AC adaptor to the power port

and an AC outlet.
LThe WAN indicator on the base unit lights in

steady green or amber.

Wireless Ethernet bridge

2 3

2. Installing the base unit

ł

2-B While you are at home

The base unit has 2 modes of operation for use at home: AP (Bridge) mode
and Router mode.

– AP (Bridge) mode is designed for the case when you have an existing

router or modem (cable or DSL) with a built-in router.

– Router mode is designed for the case when you only have a standard

cable or DSL modem.

With an EXISTING ROUTER or MODEM with a built-in
ROUTER
<AP (Bridge) mode>

If you install the base unit with your existing router or modem with a
built-in router, the base unit should be set to AP (Bridge) mode. Select
[AP (Bridge)] for your connection mode in Initialization Setup (3-A on
page 6). In AP (Bridge) mode, the base unit connects wireless devices to
one another and to the LAN, and allows wireless devices to use a DHCP
server on the LAN. In most cases, routers are equipped with the function
as the DHCP server.

Mode selector

1

Base unit

Computer
(if necessary)

4

Ethernet cable (not included)

3

Existing router

2

Cable or DSL modem

With a MODEM ONLY
<Router mode>

If you install the base unit with a modem only, the base unit should be set
to Router mode. In Router mode, the base unit assigns IP addresses to
network devices (including wireless devices) as a DHCP server. It also
protects the network devices from being directly exposed to the WAN. For
your connection mode, select [DHCP], [Static] or [PPPoE] in Initialization
Setup (3-A on page 6).

Mode selector

1

Base unit

Computer
(if necessary)

4

Ethernet cable (not included)

3

Ethernet cable (included)

2

2,5

Cable or
DSL modem

Ethernet cable
(included)

Internet

5

AC mains lead

AC adaptor

1

Switch the Mode selector to “HOME”.

2

Turn off your computer properly. Unplug any cable connecting your

existing router (or modem with a built-in router) to your computer.
However, your existing router (or modem with a built-in router) needs
to remain connected to your cable or DSL modem.

3

Connect the included Ethernet cable to the “WAN” port on the base

unit and an unused Ethernet (LAN) port on your existing router (or
modem with a built-in router).

4

Connect a separate Ethernet cable to the “LAN” port on the base

unit and the Ethernet (LAN) port on your computer.

5

Connect the included AC adaptor to the power port and an AC outlet.

LThe WAN indicator on the base unit lights in steady green or

amber.

Note:

LUse only the included Panasonic AC adaptor PQWEWP1050 and AC

mains lead PSJA1106Y.

LYou need a separate AC mains lead when you use this unit in USA,

Canada, Japan, Germany and France.

To AC outlet

6

AC mains lead

AC adaptor

1

Switch the Mode selector to “HOME”.

2

Turn off your computer properly and unplug your cable or DSL

modem’s Mains lead. Unplug any cable connecting the modem to
your computer. However, the modem needs to remain connected to
the Internet.

3

Connect the included Ethernet cable to the “WAN” port on the base

unit and the Ethernet (LAN) port on the modem.

4

Connect a separate Ethernet cable to the “LAN” port on the base

unit and Ethernet (LAN) port on your computer.

5

Plug your modem’s power adaptor into an AC outlet.

LWait for your modem’s power light to stop fl ashing before you go

to the next step. (It may take a few minutes.)

6

Connect the included AC adaptor to the power port and an AC outlet.

LThe WAN indicator on the base unit lights in steady green or

amber.

Note:

LUse only the included Panasonic AC adaptor PQWEWP1050 and AC

mains lead PSJA1106Y.

LYou need a separate AC mains lead when you use this unit in USA,

Canada, Japan, Germany and France.

Internet

To AC outlet

4 5

3

Setting up the base unit

3-A Initialization Setup

When you log in the base unit for the fi rst time, you must register the
network settings you use for HOME or HOTEL mode as a profi le in
Initialization Setup using the Web browser on the computer you connected
to the base unit’s “LAN” port.

Important:
LRequired Web browser:

– Microsoft
– Mozilla® Firefox® 1.5 or later for Windows

Operating tips:
[ ]: The words in the brackets indicate button names displayed on the

computer screen.

1

After the base unit installation (pages 2-5), turn on the computer you

connected to the base unit’s “LAN” port.

2

Open the Web browser. Enter http://192.168.102.1/ (the base unit’s

default IP address) or http://kxwpa.webpage in the address fi eld of the
browser and press the ENTER key.

LInitialization Setup starts. The Login User Name and Password page is

displayed.

®

Internet Explorer® 6.0 or later for Windows

®

ł

5

Click [Network Connection] on the Top Menu.

LThe current Internet connection settings and information of the

wireless connection are displayed.

6

Click [New Profi le] under the New Profi le heading.

LIf you have no specifi c instructions for the Internet connection from the

hotel, you can use [Default Profi le] for an easy setup. Ask the hotel
front desk for details. Select [Default Profi le] then skip to step 10.

7

Select the desired connection mode used in the current mode (HOME or

HOTEL), then click [Next>].

When the Mode selector is set to “HOME”:

LIf you have already set your user name and password, skip to step 4.

If “Initialization Setup” window is not displayed:

LCheck the network setting on your computer. It is necessary to obtain

an IP address of your computer automatically from a DHCP server.
See “Obtain an IP address automatically on your computer” in the
Operating Instructions included in the CD-ROM.

LSometimes it is necessary to set up your Web browser’s proxy server

to access the base unit. See “Changing the proxy server settings on
Web browser” in the Operating Instructions included in the CD-ROM.

3

Enter the desired user name and password, then click [Save].

Important:

LPlease keep your user name and password secure.

[User Name]

[Password]

[Retype Password]

LThe base unit begins restarting and a prompt

screen with fi elds for your user name and
password is displayed.

LThe user name and password can contain 6 to

15 alphanumeric characters.

LThe following cannot be used:

[ ” ], [ ’ ], [&], [<], [>], [ : ], [(space)]

LUser name and password must be different from

each other.

LUser name and password are case-sensitive.

LEnter the password again to verify.

LInternet connection modes vary according to the Internet service

provider. Select a connection mode referring to the Internet service
provider’s setup information.

LSelect [DHCP], [Static] or [PPPoE] if the base unit is installed in

Router mode.
Select [AP (Bridge)] if the base unit is installed in AP (Bridge) mode.

[DHCP]

[Static]

[PPPoE]

[AP (Bridge)]

When the Mode selector is set to “HOTEL”:

LSelect the conection mode as specifi c instructions for the Internet

connection from the hotel.

L[AP (Bridge)] is not available in HOTEL mode.

LAllows the base unit to receive an IP address

automatically from a DHCP server. This connection
mode is usually required for use with cable modems.

LAllows the base unit to assign a specifi c IP address.

LAllows the base unit to receive an IP address from

a PPPoE server. This connection mode is usually
required for use with DSL modems.

LAllows the base unit to work as an access point when

you have a router at home.

4

Enter the user name and password set in step 3. Then click [OK].

LTop Menu is displayed.

6 7

[DHCP]

[Static]

[PPPoE]

LA screen with fi elds for confi guring the connection mode you select in

this step is displayed.

LAllows the base unit to receive an IP address

automatically from a DHCP server. DHCP
confi guration is often used in hotel rooms.

LAllows the base unit to assign a specifi c IP address.

LAllows the base unit to receive an IP address from a

PPPoE server.

ł

C

3. Setting up the base unit

Example: When you select [DHCP]

8

Confi gure the settings referring to the Internet service provider’s setup

information (or instructions provided by the hotel), then click [Next>].

LIf your Internet service provider or the hotel you are staying in does not

specify any of the settings, leave the data fi elds blank except for MTU
entry.

LThe Save Settings page is displayed.

9

Confi rm the settings you are about to save, then click [Save].

LThe setting that you have just confi gured are saved as profi le No. 1

(HOME mode) or No. 2 (HOTEL mode) according to the position of
the Mode selector. The profi le is automatically named “Automatic
generation” and saved.

10

Click [Restart].

LThe base unit restarts with the Internet connection profi le you have just

saved. When the WAN indicator lights in steady green, the Initialization
Setup is complete.

LIn AP (Bridge) mode, you need to restart your computer.

11

Try to access a website in order to confi rm the Internet connection

setting. Enter http://www.panasonic.co.uk in the address fi eld of the
browser and press the ENTER key.

LIf the Panasonic website is displayed, you have successfully

connected to the Internet.

LIf you are in a hotel room, an authorisation for the Internet access may

be required. Ask the hotel front desk and follow their instructions.

3-B Mode selector

Once you have registered the profi les for HOME and HOTEL modes in
Initialization Setup, you can easily select the mode by switching the Mode
selector to “HOME” or “HOTEL” before turning on the base unit.

Mode selector

3-C Using your computer on a wireless LAN

The 15 character device-specifi c network name (SSID) and 13
alphanumeric character 128 bit encryption network key (WEP) are set to
factory defaults. These factory default setting values are shown on the
included Wireless LAN sticker. If you use your computer on a wireless
LAN, use the values on the sticker to set the wireless LAN confi guration
on your computer. To set your computer to be used on a wireless LAN, see
the manual for the computer you use.

Note:

LTo use your computer on a wireless LAN, a wireless LAN card needs to

be installed on your computer.

4

Setting up the handset

4-A Battery installation

1

Press the notch of the handset cover fi rmly, and

slide it in the direction of the arrow.

2

Insert the battery (A), and press it down until

it snaps into position (B). Then close the
handset cover (C, D).

B

A

Important:

LUse only the rechargeable Panasonic battery.

D

8 9

ł

Battery charge

Connect the included charge cable to the CHARGE port of the handset.
Connect the other end to the CHARGE port of the base unit that is
connected to the power supply.
Charge the battery for 6 hours before initial use.

LWhile charging, the charge indicator on the handset lights in red. When

the battery is fully charged, the indicator goes out.

Charge indicator

CHARGE ports

To AC outlet

Charge cable

Handset stand

4. Setting up the handset

łł

4-B Power on / Sign in to Skype

To use the handset, you need a Skype account and need to connect to a
network and sign in to Skype. If you do not have a Skype account, you can
create it using the handset.

Operating tips:

{ }: The words in the brackets indicate button names/soft key names on

the handset.

“ ”: The words in quotations indicate menu items displayed on the handset

screen.

Starting up for the fi rst time

Perform the following procedures after installing and setting up the base
unit (pages 2-9).

1

Press and hold {}} for 2 seconds to turn on the handset.

2

Read the entire Skype agreement. i {Yes}

LThe handset starts searching for available networks

in range, then the handset automatically connects to
the base unit.

LIf the network list is displayed, select the desired

network and press {Connect}.

If you already have a Skype account:

3

After a network connection is complete, select “Sign in to Skype”.

i {Select}

4

Enter your Skype name (see section 6-C on page 14 for information on

entering text). i {OK} i Enter your password. i {OK}

5

Press {Yes} or {No} to decide whether to sign in automatically from the

next time on.

LThe Idle screen appears.

If you do not have a Skype account:

3

“Create new account” i {Select}

4

Enter a Skype name (see section 6-C on page 14 for information on

entering text). i {OK} i Enter a password. i {OK} i Re-enter
the password. i {OK}

LSkype names can be 6 – 32 characters, numbers, and punctuation

marks. You cannot use spaces or start your name with a number or
punctuation mark. If the name is already in use, you will be prompted
to try another name. Password can be 4 – 20 characters. You can
use any mix of upper- and lowercase characters, numbers, and
punctuation marks. You cannot use spaces, start your name with a
number or punctuation mark, or use your Skype name as a password.

5

Read the entire Skype agreement. i {Yes}

LThe Idle screen appears.

<Idle screen>

Handset status icons

Skype online status

Skype credit balance

Note:

LIn step 2, you can connect to specifi c networks that require you to select

security type and enter the network key.

LIn step 2, you can also connect to open networks. When connecting to

open networks, the confi rmation message appears.

To turn off the handset:

Press and hold {}} for 2 seconds.

10

Current time

Soft key functions

4. Setting up the handset

ł

Starting up for the second time

1

Press and hold {}} for 2 seconds to turn on the handset.

LThe handset starts searching for available networks. If any networks

you normally use are already in your preferred networks list, the
handset automatically connects to one of the networks in the list.

2

After a network connection is complete, select “Sign in to Skype”.

i {Select}

LIf the handset is set to “Auto sign in” and you did not sign out

the previous time, the Idle screen appears instead of the “Sign in”
screen and steps 3 and 4 are skipped.

3

Enter your Skype name. i {OK} i Enter your password. i {OK}

4

Press {Yes} or {No} to decide whether to sign in automatically from the

next time on.

LThe Idle screen appears.

4-C Setting the time and date

Set the correct time and date before you start using the handset.
LChanging “Time zone” and “Summer time” sets the displayed time

forward or backward. When you set the time and date for the fi rst time,
set the time after all the other time and date settings.

1

{Menu} (middle soft key)

2

“Settings” i {Select}

3

“Time and Date” i {Select}

4

Select the desired setting.

Time zone

Summer time

Time

Time format

Date

Date format

Note:

LIf you make a mistake when entering the time and date, press {<} or {>}

to move the cursor, then make the correction.

Select the desired item. i {Select}

Select “Standard” or “Summer time”. i {Select}

Enter the current hour and minute (24-hour clock/
12-hour clock format) by selecting 2 digits for each.
For 12-hour clock, press {*} to select “AM” or “PM”.
i {OK}

Select “24 hour clock” or “12 hour clock”. i

{Select}

The default is set to “24 hour clock”.

Enter the current day, month and year by selecting
2 digits for day and month, and 4 digits for year. i

{OK}

Select the desired format. i {Select}

5

Menus

5-A Main menu

Skype’s Main menu provides 7 menus as shown below.

1

{Menu} (middle soft key)

2

Select the desired menu. i {Select}

Contacts*

History*

Status*

Add contact*

Search*

Services*

1

View a list of Skype and SkypeOut™ contacts with their
current Skype status.

1

View history of missed calls, incoming calls, outgoing
calls, Voicemails and authorization requests.

1

1

Defi ne your personal Skype settings.

LChange status: Change your Skype online status.
LMy profi le: Change your profi le details.
LSign out: Sign out of Skype.

1

Add Skype and SkypeOut contacts to your contact list.

Search for Skype contacts over the Internet.

1

View Skype credit, SkypeIn™ and Voicemail information.

Settings

*1 Available only when you are signed in to Skype.

Confi gure handset settings.
LNetwork:

networks list, and set auto-connection to open networks.

LGeneral: Change your password*1, set auto sign-in*1,

update software, and reset handset settings.

LCall divert*1: Set call forwarding, Voicemail and

welcome message.

LPrivacy*1:
LTones: Set the ringer type, tone, volume, notifi cation

tone, Keypad tone and out of service tone.

LTime and Date: Set the time zone, summer time,

time, time format, date and date format.

LBlocked users*1: View blocked users list and

unblock users you desire.

LPhone settings: Register the handset to the base

unit and adjust the brightness of the handset display.

L

Information: View handset information such as product
ID, software/fi rmware versions and MAC address.

LAdvanced: Set the notifi cation for software update and

set network proxy.

Search for networks, manage preferred

Restrict incoming calls to those you specify.

5-B Idle mode option screen

1

{Options}

2

Select the desired menu. i {Select}

LFunctions available in the menu depend on whether

you are signed in to Skype.

Silent*

Sounds on*

1

1

Set the silent mode to on.

Set the silent mode to off.

11 12

Change status*2 *

My profi le*

Sign out*

View networks

Network details

*1 Either is displayed according to the current silent mode setting.
*2 Available only when you are signed in to Skype.
*3 You can also access to the “Change status” menu by pressing {^}

while in the Idle screen.

2

3

Change your Skype online status.

2

Change your Skype profi le details.

Sign out of Skype.

View a list of networks found within range.

View network connection information.

6

Managing contacts

6-A Adding contacts

You can add up to 500 contacts to your contact list. If you have an existing
Skype account, your contact list is automatically downloaded when you
sign in. If you are new to Skype and have just created an account, your
contact list will be empty. You will need to add contacts to your list.

Adding Skype contacts

1

{Menu} (middle soft key)

2

“Add contact” i {Select}

3

“Skype” i {OK}

4

Enter the Skype name (max. 32 characters; see

section 6-C on page 14 for information on entering
text). i {OK}

5

Press {Yes} to add the contact to your list and to authorize the contact

to see when you are online.

LPress {No} to add the contact without the authorization.
LIf you previously sent an authorization request to the same user and

the user accepted your request, skip steps 6 and 7, then press {OK}.

6

Press {OK} to send an authorization request to the added contact.

7

Enter text to send with the request (max. 200 characters). i {OK}

Note:

LYou can also search and add Skype contacts from the “Search” menu

(6-B on this page).

Adding SkypeOut numbers

You can add non-Skype (SkypeOut) numbers to your contact list. SkypeOut
numbers are listed with “

1

{Menu} (middle soft key)

2

“Add contact” i {Select}

3

“SkypeOut number” i {OK}

4

“Contact’s name” i {Select}

5

Enter the name if you desire (max. 50 characters; see section 6-C on

page 14 for information on entering text). i {OK}

6

“Phone number” i {Select}

7

Enter the phone number (max. 20 digits) in the following way (even for

local calls):
“country code” + “area code” + “local phone number” i {OK}

Example (using the country code “1” for calling USA): + 1 555 321 5555

L“+” (international prefi x) is automatically added.
LFor some countries, you may need to exclude “0” at the beginning of

the area code.

LTo correct a digit, press {CLEAR}.

8

{Save}

” icon in your contact list.

6-B Searching for Skype contacts

You can search the Skype directory for your desired Skype contacts over
the Internet so that you can call, add to your contact list, or view the profi les
of the contacts.

1

{Menu} (middle soft key)

2

“Search” i {Select}

3

Enter the name (Skype name or full name) or E-mail address to search

for (max. 50 characters; see section 6-C on this page for information on
entering text). i {OK}

LYou can also search for a contact by entering a part of the name.
LThe contacts containing the entered characters are listed.

4

Select the desired Skype contact.

LTo view the contact’s profi le, press {View}.
LTo call the contact, press {{} or {s}.
LTo access options, press {Options} and select the desired option. i

{Select}

More results

Previous results

Search again

Add to contacts

View profi le

View the next 20 results.

View the previous 20 results.

Search again with another keyword.

Add the contact to your contact list.

View the contact’s profi le.

6-C Text entry

The dial keys are used to enter characters and numbers. Each dial key
has multiple characters assigned to it. Use the following character table for
reference when you enter characters or numbers.

Character table

Text entry screen

Key

Lowercase

(abc)

1. ,?! -_@*

{1}

abc2 ABC2 2 2ab c 2

{2}

de f 3 DEF3 3 3d e f 3

{3}

gh i 4 GHI 4 4 4 4

{4}

jkl5 JKL5 5 5 5

{5}

mn o 6 MNO6 6 6 6

{6}

pq r s7PQRS7 7 7 7

{7}

tuv8 TUV8 8 8

{8}

wx y z 9WXYZ9 9 9 9

{9}
{0}

{*}
{#}

*1 Valid depending on the text entry screen.

Space*

1

Uppercase

(ABC)

0 Space*100

Change character entry mode

Line feed*

1

1

Numeric

(123)

+ (

and hold

Hexadecimal

(HEX)

11 1

00

Press

1

)*

Basic operation

LTo move the cursor, press {<} or {>}.
LTo enter another character located on the same dial key, leave for a

second after pressing the dial key, so that the cursor automatically moves
to the right.

LTo change the character entry mode, press {*} repeatedly to shift

through Lowercase (abc), Uppercase (ABC), Numeric (123) and
Hexadecimal (HEX) modes. (Changing the character entry mode is
invalid when you enter phone numbers.)

LPress {*} to switch between uppercase and lowercase just after entering

a character.

LTo enter symbols while in the text entry screen, press {Symbol} and

select the desired symbol, then press {Insert}.
(The available symbols differ depending on the text entry screen.)

LTo edit/correct a mistake, press {<} or {>} to move the cursor to the

character or number you want to erase, then press {CLEAR}. Enter the
appropriate character or number.

Phone No.

entry screen

Numeric

(123)

8

+ (Press

and hold)

*

#

13 14

7

Making / answering calls

7-A Making Skype calls

Using the contact list

1

{CONTACTS}

2

Select the desired Skype contact. i {{}

LYou can search for a contact by entering a part of the display name.

Press the dial keys to enter the name, then press {^} or {V} to select
the desired contact from the candidates.

3

When you are fi nished talking, press {}}.

Note:

LIn step 1, you can also press {Menu} (middle soft key). i “Contacts”

i {Select}

Using History

The following events are logged in the “History” menu: 50 missed calls,
20 incoming calls, 20 outgoing calls, 100 Voicemails and 20 authorization
requests.

1

{Menu} (middle soft key)

2

“History” i {Select}

3

Select the desired list. i {Select}

4

Select the desired log. i {{}

LIf you select a Voicemail log, press {Options}.

i “Call” i {Select}

5

When you are fi nished talking, press {}}.

Note:

LIn step 1, you can also press {{} to access the outgoing calls list. i

Press {<} or {>} to switch between the outgoing calls, incoming calls
and missed calls lists, then skip to step 4.

7-B Making regular phone calls (SkypeOut)

SkypeOut is a way to make calls from Skype to persons who use landlines
or mobile phones. You must have Skype credit to make SkypeOut calls.
For more information, please visit http://www.skype.com/

1

Enter the phone number in the following way (even for local calls):

“country code” + “area code” + “local phone number”

Example (using the country code “1” for calling USA):
+ 1 555 321 5555

L“+” (international prefi x) is automatically added.
LFor some countries, you may need to exclude “0” at the beginning of

the area code.

LTo correct a digit, press {CLEAR}.

2

{{}

3

When you are fi nished talking, press {}}.

7-C Answering calls

1

Press {{} or {s}.

2

When you are fi nished talking, press {}}.

To reject the call:

While the handset is ringing, press {}}.

Temporary ringer off:

While the handset is ringing, press {Silent}.

7-D Useful features during a call

Feature Operation

Using the
speakerphone

Reciver/Speaker
volume

Hold

Mute

Call waiting

Press {s} during a call.
LTo switch to the receiver, press {s} or {{}.

Press {^} or {V} repeatedly during a call.

1

Press {Hold} during a call.

2

To release hold, press {Resume} or {{}.

1

Press {MUTE} during a call.

2

To return to the conversation, press {MUTE} or {{}.

1

Press {Answer} to answer the 2nd call after the call

waiting tone.

2

To switch between calls, press {Switch}.

3

To resume conversation, press {Resume}.

8

For other troubleshooting, please see the Operating Instructions included
in the CD-ROM. You can also get up-to-date support information from our
website: http://www.panasonic.co.uk

Problem Cause/solution

The unit does not work. • Make sure the battery is installed correctly and

The Top menu of
the base unit is not
displayed.

Troubleshooting

fully charged (pages 8-9).

• Check the connections (pages 2-5).

• Unplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.

• The handset has not been registered to the
base unit. Register the handset (refer to the
Operating Instructions included in the CD­ROM).

• Confi rm the new IP address by using the
handset. Select “Network details” in the
Idle mode option screen (5-B on page 11).
Enter the displayed IP address in the address
fi eld of the browser after http://.

15 16

Problem Cause/solution

I cannot make a call. • Confi rm the Ethernet cable is properly

connected (pages 2-5).

• If you cannot access Internet Web pages using
your computer, check to see if your Internet
service provider is having connection problems
in your area.

• Double-check your device connections against
the installation instructions (pages 2-5). The
order in which you turn on the devices is very
important.

• Many installation issues can be resolved by
resetting all the equipment. First, power down
your modem, base unit, router (if you have
one), and computer. Then, turn the devices
back on one at a time in this order: modem,
router, base unit, computer. If you use the
PPPoE connection, it may take a few minutes
or more to reset the PPPoE connection.