Panasonic kx-ts3 Operation Manual

Getting Started

Operation

Integrated Telephone System

Model No.

Pulse-or-tone dialing capability

KX-TS3W

1-A Location of controls

Operating Instructions

Accessories (included)

Handset . . . . . . one

Handset Cord . . one

• To order accessories, call 1-800-332-5368.

PLEASE READ BEFORE USE AND SAVE.

Attach your purchase receipt here.

For your future reference

Serial No.

(found on the bottom of the unit)

Date of purchase Name and address of dealer

Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America

One Panasonic Way, Secaucus, New Jersey 07094

Panasonic Sales Company, Division of Matsushita Electric Corporation of America

Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park Carolina, Puerto Rico 00985

Printed in Mexico

PQQX13037ZA AR0401MH0

3-A For Call Waiting Service Users

Press if you hear a call-waiting tone while talking.

∑ The ﬁrst call is put on hold and you can answer the

second call.

∑ To return to the ﬁrst caller, press again.

3-B Temporary Tone Dialing

Press before entering access numbers which require tone dialing.

∑ After a few seconds, the dialing mode changes to

tone. You can enter numbers to access answering services, electronic banking services, etc. When you hang up, the mode will return to pulse.

Telephone Line Cord

. . . . . . . . . . . . . one

Special Features

(For Rotary or Pulse Service Users)

1-B Settings

Connect the handset cord.

Connect the telephone line cord, then lift the handset to conﬁrm the dial tone.

Single-Line Telephone Jack (RJ11C)

Telephone Line Cord

DIALING MODE Selector

RINGER Selector

Things You Should Know

HANDSET VOLUME Selector

Handset

Handset Cord

4-A Wall Mounting

The unit can be mounted on a wall phone plate.

Connect the telephone line cord to the unit.

Connect the telephone line cord to

Single-Line Telephone Jack. Mount the unit, then slide down.

Wall Phone Plate

To temporarily set the handset down during a conversation, place it as shown here.

Set the DIALING MODE selector to TONE.

∑ If you cannot dial, set to PULSE.

TONE PULSE

DIALING MODE

Set the RINGER selector to HIGH, LOW or

OFF. (Ex. “LOW” is selected.)

HIGH OFF

RINGER

∑ When set to OFF, the unit will not ring.

Set the HANDSET VOLUME selector to

HIGH, MEDIUM or LOW. (Ex. "MEDIUM" is selected.)

LOW HIGH

HANDSET VOLUME

4-B Before Requesting Help

Problem

The unit does not work.

The call cannot be connected even you dialed correctly.

The unit does not ring.

If you cannot solve your problem

∑ Check the settings (1-B). ∑ Check whether the

∑ The RINGER selector is

∑ Call our customer call

Remedy

DIALING MODE selector setting is correct or not (1-B).

set to OFF. Set to HIGH or LOW (1-B).

center at 1-800-211-PANA(7262).

4-C Safety Instructions

Take special care to follow the safety suggestions listed below.

• Environment- do not place the unit in room where the temperature is less than 5oC (41oF) or greater than 40oC (104oF). Allow 10 cm (4") clearance around the unit for proper ventilation. Avoid excessive smoke, dust, mechanical, vibration, shock or direct sunlight.

2-A Making Calls

Lift the handset.

Dial a phone number.

∑ If you misdial, hang up and start again from

step 1.

When ﬁnished talking, hang up.

To redial the last number dialed

Lift the handset.

Press .

∑ will dial the last number you called

manually.

2-B Answering Calls

When the unit rings, lift the handset.

When ﬁnished talking, hang up.

• Routine care- wipe the unit with a soft cloth. Do not use benzine, thinner, or any abrasive powder.

• If there is any trouble- disconnect the unit from the telephone line and connect a known working phone If the known working phone operates properly, have your unit repaired by one of the authorized Panasonic Factory Service Centers. If the known working phone does not operate properly, consult your telephone company.

For product service

• Call 1-800-211-PANA(7262) or 1-800-833-9626 for the location of an authorized servicenter.

When you ship the product

• Carefully pack your unit, preferably in the original carton.

• Attach a letter, detailing the symptom, to the outside of the carton.

Symptom

• Send the unit to an authorized servicenter, prepaid and adequately insured.

• Do not send your unit to the Panasonic Consumer Electronics Company listed the back cover or to executive or regional sales offices. These locations do not repair consumer products.