Panasonic KX-TPA50 Installation Manual

Installation Manual

Additional Cordless Handset

Model No. KX-TPA50

Thank you for purchasing a Panasonic product.

This unit is an additional handset compatible with the following
series of Panasonic SIP Cordless Phone:
KX-TGP500/KX-TGP550
You must register this handset with your base unit before it can
be used. This installation manual describes only the steps
needed to register and begin using the handset. For further
details, please read the base unit’s User Guide on the
Panasonic Web site at:

http://www.panasonic.com/sip

Charge the batteries for about 6 hours before initial use.

Please read this installation manual before using the unit and
save it for future reference.

Printed in Malaysia

PNQX2117XA DM0709SY3060

Accessory information

Supplied accessories

Accessory item/Order number Quantity

Charger/PNWETGP500B 1

AC adaptor/PQLV219Z or PQLV219 (03)Z 1

Rechargeable batteries/HHR-4DPA
(Part No. HHR-65AAABU or N4DHYYY00002)

*1

Handset cover

Belt clip/PNKE1029Z1 1

*1 The handset cover comes attached to the handset.

Note:

LPlease read the additional/replacement accessory section of the base

unit’s User Guide on the Panasonic Web site. See page 1 for
Panasonic URL.

/PNYNTGA641TR 1

2

Setting up

Connections

(120 V AC,
60 Hz)

Note:

LUse only the supplied Panasonic AC adaptor PQLV219 or PQLV219

(03).

Hooks

2

LThe AC adaptor must remain connected at all times. (It is normal for

the adaptor to feel warm during use.)

Battery installation/Battery charge

Important:

LUse the supplied rechargeable batteries. For replacement, we

recommend using the Panasonic rechargeable batteries noted on
page 2.

LWipe the battery ends (S, T) with a dry cloth.
LAvoid touching the battery ends (S, T) or the unit contacts.
LConfirm correct polarities (S, T).
LUSE ONLY Ni-MH batteries AAA (R03) size.
LDo NOT use Alkaline/Manganese/Ni-Cd batteries.

Charge for about 6 hours.
LWhen the batteries are fully charged, the charge indicator goes off.

Charge indicator

Rechargeable Ni-MH
ONLY

Note:

LIf the batteries are fully charged, but the operating time seems to be

shorter, clean the battery ends (S, T) and the charge contacts with a
dry cloth and charge again.

Confirm
“Charging” is
displayed.

3