Panasonic KX-TG9391 Operating Instructions

TG9391_QG(e).fm Page 1 Thursday, July 3, 2008 9:25 AM

Quick Guide

Setting up

Connecting the AC adaptor / corded handset

L Use only the supplied Panasonic AC adaptor PQLV207 or PQLV219.

Model No. KX-TG9391

KX-TG9392

Press plug
firmly.

“Click”

(120 V AC, 60 Hz)

Hook

Connecting the telephone line cord

N To connect to a 2-line telephone jack

USE ONLY a 4-wire
telephone line cord.

4-wire cord

“Click”

“GREEN” plug

N To connect to 2 single-line telephone jacks

“Click”

“Transparent” plug

“GREEN” plug

2-wire cord

4-wire cord

“Click”

To 2-line telephone jack (RJ14C)

To single-line telephone jacks (RJ11C)
Line 1

Line 2

If you subscribe to a DSL/ADSL service, attach a DSL/ADSL filter to the telephone line between the base
unit and the telephone line jack. Refer to the operating instructions for connections.

PNQW1340ZA DM0708SY0

TG9391_QG(e).fm Page 2 Thursday, July 3, 2008 9:25 AM

Setting up

Handset

L USE ONLY Ni-MH batteries AAA (R03) size.
L

Do NOT use Alkaline/Manganese/Ni-Cd batteries.

L Confirm correct polarities (S, T) when installing the batteries.

Rechargeable Ni-MH ONLY

Charger

L Use only the supplied

Panasonic AC adaptor
PQLV209 or PQLV219.

(120 V AC, 60 Hz)

Operating tips

Using the navigator keys

The navigator keys can be used to navigate through menus and to
select items shown on the display by pressing:

Base unit: {^}, {V}, {7}, or {8}
Handset: {^}, {V}, {<}, or {>}
To adjust the receiver or speaker volume, press {^} to increase

the volume, or press {V} to decrease the volume repeatedly while
talking.

CHARGE FOR
ABOUT 7 HOURS

Confirm
“Charging” is
displayed.

Base unit Handset

{^}

{7}{8}

{V}

{<}{>}

{^}

{V}

Soft keys

Each unit features 3 soft keys. By pressing a soft key, you can select
the feature shown directly above it on the display.
{MENU}, {SELECT}, {OK}, and additional other functions are
assigned to soft keys. Pay attention to soft keys to find functions you
need during operation.

– 2 –

Base unit

Handset

TG9391_QG(e).fm Page 3 Thursday, July 3, 2008 9:25 AM

Date and time (Base unit/Handset)

Program this setting using either the base unit or one of the handsets.

1 {MENU} i {#}{1}{0}{1}
2 Enter the current month, date, and year.
3 Enter the current hour and minute (12-hour clock format).
4 Press {*} to select “AM” or “PM”. i {SAVE}
5 Proceed with the operation for your unit.

Base unit: {■}
Handset: {OFF}

Basic operations

Making/Answering calls (Base unit/Handset)

Making calls Base unit: Dial the phone number. i Lift the corded handset, or

press {SP-PHONE}.
Handset: Dial the phone number. i {C}/{s}

Answering calls Base unit: Lift the corded handset, or press {SP-PHONE}.

To hang up Base unit: Place the corded handset on the cradle. When the

Making a call using the redial list 1 {REDIAL} i {V}/{^}: Select the desired phone number.

To adjust the ringer volume 1 {MENU} i {#}{1}{6}{0}

Handset: {C}/{s}

speakerphone is used, press {SP-PHONE}.

Handset: {OFF}

2 Proceed with the operation for your unit.

Base unit: Lift the corded handset.
Handset: {C}

2 {V}/{^}: Select the desired line. i {SELECT}
3 {V}/{^}: Select the desired volume. i {SAVE}
4 Proceed with the operation for your unit.

Base unit: {■}
Handset: {OFF}

– 3 –