Panasonic KX-TG9333T, KX-TG9344 User Manual
Model shown is KX-TG9331.
Operating Instructions
Expandable Digital Cordless
Answering System
Model No. KX-TG9331
KX-TG9341
with 2 Handsets
Model No. KX-TG9332
KX-TG9342
with 3 Handsets
Model No. KX-TG9333
KX-TG9343
with 4 Handsets
Model No. KX-TG9334
KX-TG9344
This unit is compatible with Caller ID. You must subscribe to the appropriate
service offered by your service provider/telephone company.
Charge the batteries for about 7 hours before initial use.
Please read these operating instructions before using the unit and save
them for future reference.
For assistance, visit our website:
http://www.panasonic.com/help for customers in the U.S.A. or Puerto
Rico.
Table of Contents
Introduction
Product information . . . . . . . . . . . . . . . 3
Accessory information. . . . . . . . . . . . . 5
For your safety . . . . . . . . . . . . . . . . . . 7
Important safety instructions . . . . . . . . 8
For best performance . . . . . . . . . . . . . 8
Preparation
Controls. . . . . . . . . . . . . . . . . . . . . . . 10
Display. . . . . . . . . . . . . . . . . . . . . . . . 11
Connections . . . . . . . . . . . . . . . . . . . 12
Battery installation and replacement . 13
Battery charge . . . . . . . . . . . . . . . . . . 14
Symbols used in these operating
instructions . . . . . . . . . . . . . . . . . . . . 15
Setting up the unit before use . . . . . . 15
Belt clip . . . . . . . . . . . . . . . . . . . . . . . 16
Headset (optional) . . . . . . . . . . . . . . . 16
Making/Answering Calls
Making calls. . . . . . . . . . . . . . . . . . . . 17
Answering calls . . . . . . . . . . . . . . . . . 18
Useful features during a call . . . . . . . 19
Shared Phonebook
Shared phonebook . . . . . . . . . . . . . . 21
Programming
Programmable settings . . . . . . . . . . . 23
Special instructions for programmable
settings . . . . . . . . . . . . . . . . . . . . . . . 28
Registering a unit . . . . . . . . . . . . . . . 30
Caller ID Service
Using Caller ID service . . . . . . . . . . . 31
Caller list . . . . . . . . . . . . . . . . . . . . . . 32
Answering System
Answering system. . . . . . . . . . . . . . . 34
Turning the answering system on/off. 34
Greeting message. . . . . . . . . . . . . . . 35
Listening to messages using the base
unit . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Listening to messages using the
handset . . . . . . . . . . . . . . . . . . . . . . . 36
Voice memo. . . . . . . . . . . . . . . . . . . . 37
Remote operation . . . . . . . . . . . . . . . 37
Answering system settings . . . . . . . . 38
Voice Mail Service
Voice mail service. . . . . . . . . . . . . . . 40
Intercom/Locator
Intercom . . . . . . . . . . . . . . . . . . . . . . 42
Transferring calls, conference calls . 42
Handset locator . . . . . . . . . . . . . . . . 43
Useful Information
Wall mounting . . . . . . . . . . . . . . . . . . 44
Error messages . . . . . . . . . . . . . . . . 46
Troubleshooting . . . . . . . . . . . . . . . . 47
FCC and other information . . . . . . . . 52
Specifications . . . . . . . . . . . . . . . . . . 55
Customer services . . . . . . . . . . . . . . 56
Warranty . . . . . . . . . . . . . . . . . . . . . . 57
Index
Index. . . . . . . . . . . . . . . . . . . . . . . . . 59
2
Introduction
Product information
Thank you for purchasing a new Panasonic digital cordless phone.
Notable differences between the models
KX-TG9331 series
L Model shown is
KX-TG9334.
Model No.
KX-TG9331 KX-TG9331 KX-TGA931 1
KX-TG9332 KX-TG9331 KX-TGA931 2
KX-TG9333 KX-TG9331 KX-TGA931 3
KX-TG9334 KX-TG9331 KX-TGA931 4
KX-TG9341 series
Model No.
KX-TG9341 KX-TG9341 KX-TGA931 1
KX-TG9342 KX-TG9341 KX-TGA931 2
KX-TG9343 KX-TG9341 KX-TGA931 3
KX-TG9344 KX-TG9341 KX-TGA931 4
Base unit Handset
Part No. Part No. Quantity
L Model shown is
KX-TG9344.
Base unit Handset
Part No. Part No. Quantity
For assistance, please visit http://www.panasonic.com/help
3
Introduction
Feature differences
Model No.
Intercom
*1
N ⇔ N
KX-TG9331 r
*2
Making/answering calls
with base unit
–
KX-TG9332 r –
KX-TG9333 r –
KX-TG9334 r –
KX-TG9341 r
*2
r
KX-TG9342 rr
KX-TG9343 rr
KX-TG9344 rr
*1 Intercom calls can be made between the handsets.
*2 Intercom calls can be made between the handsets by purchasing and registering
one or more optional handsets (page 6).
Feature highlights
■ Talking Caller ID
Allows the handset and base unit to announce the caller’s name or phone number
when a call is received (page 31).
■ Block calls
Allows the unit to reject calls from specified phone numbers that you do not want
to answer such as junk calls (page 28).
■ Night mode
Allows you to select a span of time during which the handset will not ring for
outside calls (page 28).
■ Talking battery alert/Talking alarm clock
Allows the handset to alert you if the battery is low (talking battery alert; page 14)
and to alert you at the set time with a selected voice announcement such as “Good
morning” as a wake-up greeting (talking alarm clock; page 29).
4
For assistance, please visit http://www.panasonic.com/help
Introduction
Accessory information
Supplied accessories
Quantity
Accessory item/
No.
Order number
1 AC adaptor for base unit/
PQLV207T
2 Telephone line cord/
PQJA10075Z
3 Wall mounting adaptor/
PNKL1001Z1 (Black metallic)
PNKL1001Z2 (Pearl silver)
4 Rechargeable batteries
5 Handset cover
PNYNTGA430BR (Black metallic)
PNYNTGA931SR (Pearl silver)
6 Belt clip/
PNKE1004Z1 (Black metallic)
PNKE1004Z2 (Pearl silver)
7 Charger/
PNLC1001YT (Black metallic)
PNLC1001YS (Pearl silver)
8 AC adaptor for charger/
PQLV209T
*1 The wall mounting adaptor is not supplied with KX-TG9341/KX-TG9342/
KX-TG9343/KX-TG9344, but it is available as an option.
*2 See page 6 for replacement battery information.
*3 The handset cover comes attached to the handset.
*3
*2
/
KX-TG
9331/
KX-TG
9341
1/(-)
KX-TG
9332/
KX-TG
9342
1111
1111
*1
1/(-)*11/(-)*11/(-)
2468
1234
1234
–123
–123
KX-TG
9333/
KX-TG
9343
KX-TG
9334/
KX-TG
9344
*1
12345
678
For assistance, please visit http://www.panasonic.com/help
5
Introduction
Additional/replacement accessories
Please contact your nearest Panasonic dealer for sales information.
No. Accessory item Order number
1 Headset KX-TCA60, KX-TCA86, KX-TCA92, KX-TCA93,
2 T-adaptor KX-J66
3 Battery back-up
power supply
4 Wall mounting
adaptor for base unit
KX-TCA94, KX-TCA95
KX-TCA230
PNKL1001Z1 (Black metallic)
PNKL1001Z2 (Pearl silver)
1
L Headset shown is
KX-TCA86.
Replacement battery information:
L Replace batteries only with a nickel metal hydride (Ni-MH) type of battery. This
model requires 2 AAA (R03) batteries for every handset. For best performance, we
recommend using Panasonic rechargeable batteries (Order No. HHR-4DPA). To
order, please call 1-800-332-5368 or visit http://www.panasonic.com/batterystore
23
Expanding your phone system
You can expand your phone system by registering optional handsets (max. 6) to a
single base unit.
Optional handset feature overview
The features of the following handsets depend on the base unit to which the handset
is registered.
Feature Model No.
KX-TGA630 KX-TGA930*1KX-TGA935
Headset jack – rr
Belt clip – rr
Drop and splash resistance – – r
*1 KX-TGA930 has the same feature as the supplied handset (KX-TGA931: not
available as an option) and their difference is the color of dial keypad (black) only.
Sales and support information
L To order additional/replacement accessories, call 1-800-332-5368.
L TTY users (hearing or speech impaired users) can call 1-866-605-1277.
6
For assistance, please visit http://www.panasonic.com/help
For your safety
To prevent severe injury and loss of
life/property, read this section carefully
before using the product to ensure
proper and safe operation of your
product.
WARNING
Power connection
L Use only the power source marked on
the product.
L Do not overload power outlets and
extension cords. This can result in the
risk of fire or electric shock.
L Completely insert the AC
adaptor/power plug into the power
outlet. Failure to do so may cause
electric shock and/or excessive heat
resulting in a fire.
L Regularly remove any dust, etc. from
the AC adaptor/power plug by pulling
it from the power outlet, then wiping
with a dry cloth. Accumulated dust
may cause an insulation defect from
moisture, etc. resulting in a fire.
L Unplug the product from power outlets
if it emits smoke, an abnormal smell,
or makes an unusual noise. These
conditions can cause fire or electric
shock. Confirm that smoke has
stopped emitting and contact the
Panasonic Call Center at 1-800-211PANA (1-800-211-7262).
L Never touch the plug with wet hands.
Danger of electric shock exists.
Installation
L To prevent the risk of fire or electrical
shock, do not expose the product to
rain or any type of moisture.
L Do not place or use this product near
automatically controlled devices such
For assistance, please visit http://www.panasonic.com/help
Introduction
as automatic doors and fire alarms.
Radio waves emitted from this product
may cause such devices to
malfunction resulting in an accident.
Operating safeguards
L Unplug the product from power outlets
before cleaning. Do not use liquid or
aerosol cleaners.
L Do not disassemble the product.
L Do not spill liquids (detergents,
cleansers, etc.) onto the telephone
line cord plug, or allow it to become
wet at all. This may cause a fire. If the
telephone line cord plug becomes
wet, immediately pull it from the
telephone wall jack, and do not use.
Medical
L Consult the manufacturer of any
personal medical devices, such as
pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
frequency) energy. (The product
operates in the frequency range of
1.92 GHz to 1.93 GHz, and the RF
transmission power is 115 mW
(max.).)
L Do not use the product in health care
facilities if any regulations posted in
the area instruct you not to do so.
Hospitals or health care facilities may
be using equipment that could be
sensitive to external RF energy.
CAUTION
Installation and relocation
L Never install telephone wiring during
an electrical storm.
L Never install telephone line jacks in
wet locations unless the jack is
specifically designed for wet
locations.
7
Introduction
L Never touch uninsulated telephone
wires or terminals unless the
telephone line has been disconnected
at the network interface.
L Use caution when installing or
modifying telephone lines.
L The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and
is easily accessible.
L This product is unable to make calls
when:
– the handset batteries need
recharging or have failed.
– there is a power failure.
Battery
L We recommend using the batteries
noted on page 6. USE ONLY
rechargeable Ni-MH batteries AAA
(R03) size.
L Do not mix old and new batteries.
L Do not open or mutilate the batteries.
Released electrolyte from the
batteries is corrosive and may cause
burns or injury to the eyes or skin. The
electrolyte may be toxic if swallowed.
L Exercise care when handling the
batteries. Do not allow conductive
materials such as rings, bracelets or
keys to touch the batteries, otherwise
a short circuit may cause the batteries
and/or the conductive material to
overheat and cause burns.
L Charge the batteries provided with or
identified for use with this product
only, in accordance with the
instructions and limitations specified
in this manual.
L Only use a compatible base unit (or
charger) to charge the batteries. Do
not tamper with the base unit (or
charger). Failure to follow these
instructions may cause the batteries
to swell or explode.
Important safety instructions
When using your product, basic safety
precautions should always be followed
to reduce the risk of fire, electric shock
and injury to persons, including the
following:
1. Do not use this product near water for
example, near a bathtub, washbowl,
kitchen sink or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using a telephone (other than a
cordless type) during an electrical
storm. There may be a remote risk of
electric shock from lightning.
3. Do not use the telephone to report a
gas leak in the vicinity of the leak.
4. Use only the power cord and
batteries indicated in this manual. Do
not dispose of batteries in a fire. They
may explode. Check with local codes
for possible special disposal
instructions.
SAVE THESE INSTRUCTIONS
For best performance
Base unit location/avoiding noise
The base unit and other compatible
Panasonic units use radio waves to
communicate with each other.
L For maximum coverage and noise-
free communications, place your base
unit:
– at a convenient, high, and central
location with no obstructions
between the handset and base unit
in an indoor environment.
– away from electronic appliances
such as TVs, radios, personal
8
For assistance, please visit http://www.panasonic.com/help
computers, wireless devices or
other phones.
– avoid facing radio frequency
transmitters, such as external
antennas of mobile phone cell
stations (avoid putting the base unit
on a bay window or near a window).
L Coverage and voice quality depends
on the local environmental conditions.
L If the reception for a base unit location
is not satisfactory, move the base unit
to another location for better
reception.
Environment
L Keep the product away from electrical
noise generating devices, such as
fluorescent lamps and motors.
L The product should be kept free from
excessive smoke, dust, high
temperature, and vibration.
L The product should not be exposed to
direct sunlight.
L Do not place heavy objects on the
power cord or top of the product.
L When you leave the product unused
for a long period of time, unplug the
product from the power outlet.
L The product should be kept away from
heat sources such as heaters, kitchen
stoves, etc. It should not be placed in
rooms where the temperature is less
than 5 °C (41 °F) or greater than 40 °C
(104 °F). Damp basements should
also be avoided.
L The maximum calling distance may be
shortened when the product is used in
the following places: Near obstacles
such as hills, tunnels, underground,
near metal objects such as wire
fences, etc.
L Operating the product near electrical
appliances may cause interference.
Move away from the electrical
appliances.
Introduction
Routine care
L Wipe the outer surface of the
product with a soft moist cloth.
L Do not use benzine, thinner, or any
abrasive powder.
Notice for product disposal, transfer,
or return
L This product can store your
private/confidential information. To
protect your privacy/confidentiality, we
recommend that you erase the
information such as phonebook or
caller list entries from the memory
before you dispose of, transfer, or
return the product.
For assistance, please visit http://www.panasonic.com/help
9
Preparation
Controls
Base unit
■ KX-TG9331/KX-TG9332/
KX-TG9333/KX-TG9334
ABCDE F
■ KX-TG9341/KX-TG9342/
KX-TG9343/KX-TG9344
ABC EDF
G HI J
IGH J
A Charge contacts
B Speaker
C {■} (STOP)
D {ERASE}
E {GREETING REC} (Recording)
F {GREETING CHECK}
G {^} (VOL.: Volume up)
{V} (VOL.: Volume down)
{7} (Repeat)
{8} (Skip)
H MIC (Microphone)
I {6} (Play)
Message indicator
J {LOCATOR} {INTERCOM}
K {ANSWER ON}
ANSWER ON indicator
K
K
A Charge contacts
B Speaker
C {■} (STOP)
D {ERASE}
E {6} (Play)
Message indicator
F {^} (VOL.: Volume up)
{V} (VOL.: Volume down)
{7} (Repeat)
{8} (Skip)
G {ANSWER ON}
ANSWER ON indicator
H {MEMO}
I {GREETING REC} (Recording)
J {GREETING CHECK}
K IN USE indicator
L Dial keypad
({*}: TONE)
M {REDIAL} {PAUSE}
N {HOLD}
O MIC (Microphone)
P {SP-PHONE} (Speakerphone)
SP-PHONE indicator
Q {FLASH} {CALL WAIT}
R {MUTE}
S {CONF} (Conference)
T {LOCATOR} {INTERCOM}
O
M PNLQRST
10
For assistance, please visit http://www.panasonic.com/help
Preparation
Handset
I
J
K
B
C
A
D
E
F
G
H
A Speaker
B {MENU}
C Soft keys
D Headset jack
E {C} (TALK)
F {s} (SP-PHONE: Speakerphone)
G Dial keypad
({*}: TONE)
H {FLASH} {CALL WAIT}
I Charge indicator
Ringer indicator
Message indicator
J Receiver
K Display
L {OFF}
M Navigator key ({^}/{V}/{<}/{>})
? (Volume: {^}/{V})
N {PAUSE} {REDIAL}
O {HOLD} {INTERCOM}
P Microphone
Q Charge contacts
C
L
M
N
O
P
Q
Using the navigator key
The handset navigator key can be used
to navigate through menus and to select
items shown on the display by pressing
{^}, {V}, {<}, or {>}.
To adjust the receiver or speaker
volume, press {^} to increase the
volume, or press {V} to decrease the
volume repeatedly while talking.
Volume up
{^}
{<}{>}
{V}
Volume down
Soft keys
The handset features 2 soft keys. By
pressing a soft key, you can select the
feature shown directly above it on the
display.
View Phone
K
CID book
L
Display
Handset display items
Item Meaning
5 Battery level
[1] Handset number
Line in
use
Someone is using the
line.
For assistance, please visit http://www.panasonic.com/help
11
Preparation
Connections
Connect the AC adaptor cord (A) by
pressing the plug firmly (B). Connect
the telephone line cord until it clicks into
the base unit and telephone line jack
(C).
Base unit
L Use only the supplied Panasonic AC
adaptor PQLV207.
L Use only the supplied telephone line
cord. Using another telephone line
cord may not allow the unit to work
properly.
To single-line
telephone jack
(RJ11C)
(120 V AC,
60 Hz)
C
A
B
Hook
Charger
Available for:
KX-TG9332/KX-TG9333/
KX-TG9334/KX-TG9342/
KX-TG9343/KX-TG9344
L Use only the supplied Panasonic AC
adaptor PQLV209.
B
A
Note:
L The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L The AC adaptor should be connected
to a vertically oriented or floormounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
(120 V AC, 60 Hz)
Hooks
12
During a power failure
The unit will not work during a power
failure. We recommend connecting a
corded-type telephone (without AC
adaptor) to the same telephone line or to
the same telephone line jack using a
Panasonic T-adaptor (page 6).
Emergency power can be supplied to the
unit by connecting a Panasonic battery
back-up power supply noted on page 6.
For assistance, please visit http://www.panasonic.com/help
If you subscribe to a DSL/ADSL
service
Please attach a DSL/ADSL filter (contact
your DSL/ADSL provider) to the
telephone line between the base unit
and the telephone line jack in the event
of the following:
– noise is heard during conversations.
– Caller ID features do not function
properly.
To single-line
telephone
jack (RJ11C)
DSL/ADSL filter
Battery installation and replacement
Important:
L Use the supplied rechargeable
batteries (Part No. HHR-65AAABU).
L When installing the batteries:
– Wipe the battery ends (S, T) with
a dry cloth.
– Avoid touching the battery ends
(S, T) or the unit contacts.
– Ensure correct polarities (S, T).
L When replacing the batteries:
– USE ONLY rechargeable Ni-MH
batteries AAA (R03) size.
– Do NOT use
Alkaline/Manganese/Ni-Cd
batteries.
Preparation
– We recommend using the
Panasonic rechargeable batteries
noted on page 6, 8.
1 Press the notch on the handset
cover firmly, and slide it in the
direction of the arrow.
2 Insert the batteries negative (T)
end first. Close the handset cover.
Rechargeable Ni-MH ONLY
Note:
L When replacing batteries, remove the
old batteries.
For assistance, please visit http://www.panasonic.com/help
13
Preparation
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY (1-800822-8837) for information on how to
recycle this battery.
Battery charge
Place the handset on the base unit or
charger for about 7 hours before
initial use.
L While charging, “Charging” is
displayed and the charge indicator on
the handset lights up. When the
batteries are fully charged, “Charge
completed” is displayed.
Base unit: Charger
*1
:
Note:
L It is normal for the handset to feel
warm during charging.
L If you want to use the handset
immediately, charge the batteries for
at least 15 minutes.
L Clean the charge contacts of the
handset, base unit, and charger with a
soft and dry cloth once a month. Clean
more often if the unit is exposed to
grease, dust, or high humidity.
Battery level
Battery icon Battery level
5 High
6 Medium
7 Low
L When flashing:
Needs to be
charged.
8 Empty
Note:
L The batteries need to be charged if:
– the handset alerts you with a voice
announcement (talking battery
alert) after you finish
talking/listening to a message.
– the handset beeps while you are
engaged in a call or operating the
answering system remotely.
*1 KX-TG9332/KX-TG9333/
KX-TG9334/KX-TG9342/
KX-TG9343/KX-TG9344
14
For assistance, please visit http://www.panasonic.com/help
Panasonic Ni-MH battery
performance (supplied batteries)
Operation Operating time
In continuous
use
Not in use
(standby)
5 hours max.
11 days max.
Preparation
Operation Operating time
While using the
clarity booster
feature (page
20)
Note:
L Actual battery performance depends
on a combination of how often the
handset is in use and how often it is
not in use (standby).
L Even after the handset is fully
charged, the handset can be left on
the base unit or charger without any ill
effect on the batteries.
L The battery level may not be
displayed correctly after you replace
the batteries. In this case, place the
handset on the base unit or charger
and let it charge for at least 7 hours.
3 hours max.
Symbols used in these operating instructions
Symbol Meaning
{} The words in the
i Proceed to the next
“” The words in
brackets indicate
button names/soft key
names on the handset
and base unit.
Example:
Unit keys: {C}, {OFF}
Soft keys: {View CID},
{Phonebook}
operation.
quotations indicate the
menu on the display.
Example: “Alarm”
Symbol Meaning
{V}/{^}:“”Press {V} or {^} to
select the words in
quotations.
Example:
{V}/{^}: “Off”
Setting up the unit before use
Display language
You can select either “English” or
“Español” as the display language.
The default setting is “English”.
1 {MENU} i {#}{1}{1}{0}
2 {V}/{^}: Select the desired setting.
3 Press the right soft key to save. i
{OFF}
Voice guidance language
You can select either “English” or
“Español” as the voice guidance
language of the answering system. This
setting also determines the voice
announcement language of the talking
alarm clock and talking battery alert. The
default setting is “English”.
1 {MENU} i {#}{1}{1}{2}
2 {V}/{^}: Select the desired setting.
3 {Save} i {OFF}
Dialing mode
If you cannot make calls, change this
setting according to your telephone line
service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1 {MENU} i {#}{1}{2}{0}
2 {V}/{^}: Select the desired setting.
For assistance, please visit http://www.panasonic.com/help
15
Preparation
3 {Save} i {OFF}
Date and time
{MENU} i {#}{1}{0}{1}
1
2 Enter the current month, date, and
year by selecting 2 digits for each.
Example: July 15, 2008
{0}{7} {1}{5} {0}{8}
3 Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
{0}{9} {3}{0}
4 {AM/PM}: Select “AM” or “PM”.
5 {Save} i {OFF}
Note:
L When English is selected as the
display language, 12-hour clock
format is used. When Spanish is
selected, 24-hour clock format is
used.
L To correct a digit, press {^}, {V}, {<},
or {>} to move the cursor to the digit,
then make the correction.
L The date and time may be incorrect
after a power failure. In this case, set
the date and time again.
Belt clip
You can hang the handset on your belt or
pocket using the supplied belt clip.
To attach the belt clip
To remove the belt clip
Headset (optional)
Connecting a headset to the handset
allows for hands-free conversations. We
recommend using the Panasonic
headset noted on page 6.
16
Switching a call between the headset
and handset speakerphone
To switch to the handset speakerphone,
press {s}.
To return to the headset, press {C}.
For assistance, please visit http://www.panasonic.com/help
Making calls
Making/Answering Calls
2 {V}/{^}: Select the desired phone
number.
3 {Erase} i {Ye s} i {OFF}
Using the handset
1
Lift the handset and dial the phone
number.
L To correct a digit, press {Clear}.
2 Press {C} or {Call}.
3 When you finish talking, press
{OFF} or place the handset on the
base unit or charger.
Using the speakerphone
1 Dial the phone number, and press
{s}.
L Speak alternately with the other
party.
2 When you finish talking, press
{OFF}.
Note:
L For best performance, use the
speakerphone in a quiet environment.
L To switch back to the receiver, press
{C}.
Adjusting the receiver or speaker
volume
Press {^} or {V} repeatedly while
talking.
Making a call using the redial list
The last 5 phone numbers dialed are
stored in the redial list (each 48 digits
max.).
1 {REDIAL}
2 {V}/{^}: Select the desired phone
number.
3 {C}
Erasing a number in the redial list
1 {REDIAL}
Pause (for PBX/long distance service
users)
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a calling
card access number and/or PIN in the
phonebook, a pause is also needed
(page 22).
Example: If you need to dial the line
access number “9” when making outside
calls with a PBX:
1 {9} i {PAUSE}
2 Dial the phone number. i {C}
Note:
L A 3.5 second pause is inserted each
time {PAUSE} is pressed. Repeat as
needed to create longer pauses.
Using the base unit
Available for:
KX-TG9341/KX-TG9342/
KX-TG9343/KX-TG9344
1
{SP-PHONE}
2 Dial the phone number.
3 When the other party answers,
speak into the MIC.
L Speak alternately with the other
party.
4 When you finish talking, press {SP-
PHONE}.
Note:
L Use the speakerphone in a quiet
environment.
L While on a call, you can switch from
the base unit to the handset:
For assistance, please visit http://www.panasonic.com/help
17
Making/Answering Calls
– Press {C} on the handset, then
press {SP-PHONE} on the base
unit.
– If the handset is on the base unit,
simply lift it.
Temporary handset ringer off
While the handset is ringing for a call,
you can turn the ringer off temporarily by
pressing {OFF}.
Adjusting the speaker volume
Press {^} or {V} repeatedly while
talking.
Redialing the last number dialed
{SP-PHONE} i {REDIAL}
Answering calls
Using the handset
When a call is being received, the ringer
indicator flashes rapidly.
1 Lift the handset and press {C } or
{s} when the unit rings.
L You can also answer the call by
pressing any dial key from {0} to
{9}, {*}, or {#}. (Any key
answer feature)
2 When you finish talking, press
{OFF} or place the handset on the
base unit or charger.
Auto talk
You can answer calls simply by lifting the
handset off the base unit or charger. You
do not need to press {C}. To turn this
feature on, see page 25.
Adjusting the base unit ringer
volume
Press {^} or {V} repeatedly to select the
desired volume.
L To turn the ringer off, press and hold
{V} until the unit beeps 2 times.
Using the base unit
Available for:
KX-TG9341/KX-TG9342/
KX-TG9343/KX-TG9344
When a call is being received, the IN
USE indicator flashes rapidly.
1 Press {SP-PHONE} when the unit
rings.
2 Speak into the MIC.
3 When you finish talking, press {SP-
PHONE}.
Adjusting the handset ringer volume
Press {^} or {V} repeatedly to select the
desired volume while the handset is
ringing for an incoming call.
Note:
L You can also program the handset
ringer volume beforehand (page 26).
18
For assistance, please visit http://www.panasonic.com/help
Loading...