TG934x_QG(e).fm Page 1 Wednesday, December 5, 2007 10:12 AM
Model No. KX-TG9331/KX-TG9332
KX-TG9333/KX-TG9334
KX-TG9341/KX-TG9342
KX-TG9343/KX-TG9344
Quick Guide
Setting up
Base unit
L Use only the supplied Panasonic AC
adaptor PQLV207.
L Use only the supplied telephone line cord.
“Click”
To single-line
telephone jack
(RJ11C)
DSL/ADSL filter
(For DSL/ADSL service
users)
(120 V AC, 60 Hz)
Handset
L USE ONLY Ni-MH batteries AAA (R03) size.
L
Do NOT use Alkaline/Manganese/Ni-Cd batteries.
L Ensure correct polarities (S, T) when
installing the batteries.
Rechargeable Ni-MH ONLY
Press plug
firmly.
Hook
CHARGE FOR
ABOUT 7 HOURS
Confirm
“Charging” is
displayed.
Charger
L Use only the supplied
*1 KX-TG9332/KX-TG9333/KX-TG9334/KX-TG9342/KX-TG9343/KX-TG9344
*1
(120 V AC, 60 Hz)
Panasonic AC adaptor
PQLV209.
PNQW1005ZA DC1207PY0
TG934x_QG(e).fm Page 2 Wednesday, December 5, 2007 10:12 AM
Operating tips
Using the navigator key
The handset navigator key can be used to
navigate through menus and to select items
shown on the display by pressing {^}, {V},
{<}, or {>}.
To adjust the receiver or speaker volume,
press {^} to increase the volume, or press {V}
to decrease the volume repeatedly while
talking.
Soft keys
The handset features 2 soft keys. By pressing
a soft key, you can select the feature shown
directly above it on the display.
{Select}, {Save}, {OK}, and additional other
functions are assigned to soft keys. Pay
attention to soft keys to find functions you
need during handset operation.
Volume up
{<}{>}
Volume down
Date and time (Handset)
1 {MENU} i {#}{1}{0}{1}
2 Enter the current month, date, and year.
3 Enter the current hour and minute (12-hour clock format).
4 {AM/PM}: Select “AM” or “PM”. i {Save} i {OFF}
{^}
{V}
View Phone
K
CID book
L
For further information, visit http://www.panasonic.com/help or refer to operating
instructions.
– 2 –
TG934x_QG(e).fm Page 3 Wednesday, December 5, 2007 10:12 AM
Basic operations
Making/Answering calls (Handset)
Making calls Dial the phone number. i {C}/{s}
Answering calls {C}/{s}
To hang up {OFF}
To adjust the receiver or
speaker volume
Making a call using the redial
list
To adjust the handset ringer
volume
Making/Answering calls (Base unit)
KX-TG9341/KX-TG9342/KX-TG9343/KX-TG9344
Making calls {SP-PHONE} i Dial the phone number.
Answering calls {SP-PHONE}
To hang up {SP-PHONE}
To adjust the speaker
volume
Redialing the last number
dialed
To adjust the base unit ringer
volume
Shared phonebook (Handset)
Adding entries 1 {Phonebook} i {Add}
Making calls {Phonebook} i {Search} i {V}/{^}: Select
Answering system (Base unit)
Answering on/off Press {ANSWER ON} to turn on/off the answering
Listening to messages {6}
Press {^} or {V} repeatedly while talking.
{REDIAL} i {V}/{^}: Select the desired phone
number. i {C}
1 {MENU} i {#}{1}{6}{0}
2 {V}/{^}: Select the desired volume. i {Save}
Press {^} or {V} repeatedly while talking.
{SP-PHONE} i {REDIAL}
Press {^} or {V} repeatedly to select the desired
volume.
LTo turn the ringer off, press and hold {V} until the
unit beeps 2 times.
2 Enter the party’s name (16 characters max.). i
{Next}
3 Enter the party’s phone number (32 digits max.).
i {Next} i {Save} i {OFF}
LTo enter a name, see the character table in the
operating instructions.
the desired entry. i {C}
system.
– 3 –
TG934x_QG(e).fm Page 4 Wednesday, December 5, 2007 10:12 AM
Frequently asked questions
Question Cause/solution
How can I increase the
handset volume level?
Why is the conversation
noisy or cutting off?
Can I add another
accessory handset to my
base unit?
Can I keep batteries
charging all the time?
How can I answer a call
waiting call (2nd call)?
For further information, visit http://www.panasonic.com/help or refer to operating
instructions.
LPress navigator key {^} repeatedly while talking.
LTry to relocate the base unit so that distance from
location to use the handset will be minimized.
LIf the same problem occurs even if the handset is next
to the base unit, send your unit for service.
LYes, you can add up to 6 handsets (including the
handset(s) sold with your own base unit) to a single
base unit.
LTo purchase accessory handset (KX-TGA630/KX-
TGA930/KX-TGA935), please visit
http://www.panasonic.com
or call 1-800-332-5368. TTY users (hearing or speech
impaired users) can call 1-866-605-1277.
LYou can leave the handset on the base unit or charger
anytime. This will not harm the batteries.
LPress {CALL WAIT} when you hear call waiting tone.
– 4 –
TG934x_QG(e).fm Page 5 Wednesday, December 5, 2007 10:12 AM
Quick troubleshooting
1 Handset shows:
“No link to base. Reconnect AC adaptor.”
Place the handset on the base unit, then
check if “Charging” is displayed.
“Charging” is not displayed.
Unplug and then plug AC
adaptor properly to both the
base unit and AC outlet.
“Charging” is still not
displayed.
Unplug the AC adaptor of the base unit and remove the
batteries from the handset, then plug in the AC adaptor and
insert the batteries into the handset again. Try to re-register
the handset (page 7).
Your telephone may need service.
Please visit http://www.panasonic.com/help for further troubleshooting.
“Charging” is
displayed, now.
Lift the handset, then try again.
If handset still shows the same
message, try to re-register the
handset (page 7).
“Charging” is
displayed.
Re-registration failed.
Re-registration failed.
– 5 –
TG934x_QG(e).fm Page 6 Wednesday, December 5, 2007 10:12 AM
Quick troubleshooting
2 No dial tone is heard from handset.
See if “Check tel line” is shown on the handset display.
Displayed Not displayed
Lift up the handset from the base unit or
charger.
Press {C} (TALK) at the handset, then
check if the display shows “Talk”.
5
No link to base.
Reconnect AC
adaptor.
“No link to
base. Reconnect
AC adaptor.”
is displayed.
Talk
K
Mute Ph.book
5
L
{C}
“Talk” is
displayed.
Check if the
telephone cord is
properly connected
to both the base
Press {s} (SP-PHONE),
then check if the dial
tone is heard from the
speaker on the back.
unit and telephone
line jack on the
wall.
Still displayed
No dial tone Dial tone is
heard.
Try to connect your
telephone into a
different line.
Try remedy for
1 on previous
page.
Your telephone
may need service
when only back
speaker provides
a dial tone.
Still displayed
Your telephone may need service.
Please visit http://www.panasonic.com/help for further troubleshooting.
– 6 –
{s}
TG934x_QG(e).fm Page 7 Wednesday, December 5, 2007 10:12 AM
Registering a handset to a base unit
The supplied handset and base unit are pre-registered. If for some reason the
handset is not registered to the base unit, register the handset.
Handset
{MENU} i {#}{1}{3}{0}
Base unit
Press and hold {LOCATOR} for 4
seconds until the registration tone
sounds.
LThe next step should be completed
within 90 seconds.
LWhile registering, “Base
registering” is displayed on all
registered handsets.
Handset
Press {OK}, then press {OFF} after a
long beep sounds.
5
Press LOCATOR
on base for 4sec
Then press OK
5
Press LOCATOR
on base for 4sec
Then press OK
L
{MENU}
{LOCATOR}
L
For further registration information, visit
http://www.panasonic.com/RegisterYourHandset
– 7 –
{OK}
TG934x_QG(e).fm Page 8 Wednesday, December 5, 2007 10:12 AM
IMPORTANT!
If your product is not
working properly. . .
1 Read this Quick Guide or Operating
Instructions
L If you lost the Operating Instructions, you can
download a copy at
http://www.panasonic.com/help
2 Visit our website:
http://www.panasonic.com/help
L FAQs and troubleshooting hints are available.
3 Contact us via the web at:
http://www.panasonic.com/contactinfo
4 Call us at:
1-800-211-PANA (1-800-211-7262)
L Monday - Friday 9:00am - 9:00pm (EST),
Saturday/Sunday 10:00am - 7:00pm (EST)
To order a replacement battery,
please call: 1-800-332-5368
Or visit:
http://www.panasonic.com/batterystore
Loading...