Panasonic KX-TG8021E, KX-TG8022E, KX-TG8023E, KX-TG8024E Operating Instructions

TG8021E(e)_QG.fm Page 1 Thursday, May 29, 2008 3:56 PM

Model No. KX-TG8021E/KX-TG8022E

KX-TG8023E/KX-TG8024E

Quick Guide

Connections

Base unit

Use only the supplied
telephone line cord.

To telephone
line

Use only the supplied Panasonic
AC adaptor PQLV207E.

Important:

LIf you use a telephone line cord which is not supplied, the unit may not work

properly.

Charger

DSL/ADSL filter
(For DSL/ADSL
service users)

(220-240 V AC, 50 Hz)

(KX-TG8022/KX-TG8023/KX-TG8024)

(220-240 V AC, 50 Hz)

Use only the supplied Panasonic
AC adaptor PQLV209E.

“Click”

Guide

Plug

Hook

Press plug firmly.

Plug

Guide

Do not try to connect over the guide.

Press plug firmly.

Hooks

PNQW1224ZA DC0608DK0

TG8021E(e)_QG.fm Page 2 Thursday, May 29, 2008 3:56 PM

Battery installation/Battery charge

Charge for about 7 hours.

Rechargeable
Ni-MH ONLY

*1 KX-TG8022/KX-TG8023/

Note:

LUSE ONLY Ni-MH batteries AAA (R03) size.
LDo NOT use Alkaline/Manganese/Ni-Cd batteries.

Screen saver mode

The backlight goes dark when on a call or
turns off completely after 1 minute of
inactivity if the handset is not on the base

unit or charger.
Activate the handset display again by:
–pressing {<} or {>} when on a call.
–pressing {ih} at all other times.

Base unit Charger

“Charging” is

displayed.

KX-TG8024

*1

– 2 –

{ih}

TG8021E(e)_QG.fm Page 3 Thursday, May 29, 2008 3:56 PM

Operating tips

Using the navigator key

The handset navigator key can be used to
navigate through menus and to select items
shown on the display by pressing {^}, {V},
{<}, or {>}.
To adjust the receiver or speaker volume,
press {^} to increase the volume, or press
{V} to decrease the volume repeatedly while
talking.

Soft keys

The handset features 3 soft keys. By
pressing a soft key, you can select the feature
shown directly above it on the display.

Menu icons

When in standby mode, pressing the middle soft key reveals the handset’s top­menu. From here you can access various features and settings.

Volume up

{^}

{<}{>}

{V}

Volume down

Icon Feature

j Caller List

J Ringer Setup

I Answer System

Date and time (Handset)

1 K (middle soft key) i N i M
2 {V}/{^}: “Time Settings” i M
3 {V}/{^}: “Set Date & Time” i M
4 Enter the current date, month, and year.
5 Enter the current hour and minute.
6 M i {ih}

– 3 –

Icon Feature

N Handset Setup
< Base Unit Setup
| Display Setup

TG8021E(e)_QG.fm Page 4 Thursday, May 29, 2008 3:56 PM

Basic operations

Making/Answering calls (Handset)

Making calls Dial the phone number. i {C}/{s}

Answering calls {C}/{s}

To hang up {ih}

To adjust the receiver/
speaker volume

Making a call using the redial
list

Handset ringer volume 1 K (middle soft key) i N i M

Phonebook (Handset)

Adding entries 1 n (left soft key) i K

Making calls 1 n (left soft key)

Answering system (Base unit)

Answering on/off Press {s} to turn on/off the answering system.

Listening to messages {6}

Press {^} or {V} repeatedly while talking.

j (right soft key) i {V}/{^}: Select the desired
phone number. i {C}

2 {V}/{^}: “Ringer Setup” i M
3 {V}/{^}: “Ringer Volume” i M
4 {V}/{^}: Select the desired volume. i M i

{ih}

2 {V}/{^}: “New Entry” i M
3 Enter the party’s name (16 characters max.).

i M

LYou can change the character entry mode by

pressing /.

4 Enter the party’s phone number (24 digits max.).

i M

5 {V}/{^}: Select the desired category.

i M 2times i {ih}

LTo enter a name, see the character table in the

operating instructions.

2 {V}/{^}: Select the desired entry.

LYou can scroll through the phonebook entry by

pressing and holding {V} or {^}.

3 {C}

– 4 –

TG8021E(e)_QG.fm Page 5 Thursday, May 29, 2008 3:56 PM

Frequently asked questions

Question Cause/solution

Why is w flashing? LThe handset is too far from the base unit. Move

Why is the handset display
blank or goes dark when on
a call?

What should I do when the
handset does not turn on?

How long is the battery
operating time?

Can I keep the handset on
the base unit or charger
when I am not using it?

When should I replace the
batteries?

What is a PIN? LThe PIN is a 4-digit number that must be entered

closer.

LThe base unit’s AC adaptor is not connected.

Check the connections.

LYou are using the handset or base unit in an area

with high electrical interference. Re-position the
base unit and use the handset away from sources
of interference.

LThe handset is not registered to the base unit.

Register it (page 7).

LThe handset is in screen saver mode. Activate the

handset display again by:
– pressing {<} or {>} when on a call.
– pressing {ih} at all other times.

L“LCD Dimming” is set to “Off” while on charge.

Change the setting.

LMake sure the batteries are installed correctly.
LFully charge the batteries.
LClean the charge contacts and charge again.

LWhen you are using fully-charged Ni-MH batteries

(supplied batteries);
In continuous use: 14 hours max.
Not in use (standby): 240 hours (10 days) max.

LIt is normal for batteries not to reach full capacity

at the initial charge. Maximum battery
performance is reached after a few complete
cycles of charge/discharge (use).

LActual battery performance depends on a

combination of how often the handset is in use
and how often it is not in use (standby).

LEven after the handset is fully charged, the

handset can be left on the base unit or charger
without any ill effect on the batteries.

LIf the batteries are fully charged until 1 is

displayed, but 3 is displayed after a few calls,
replace the batteries with new ones.

in order to change certain base unit settings. The
default PIN is “0000”.

– 5 –

TG8021E(e)_QG.fm Page 6 Thursday, May 29, 2008 3:56 PM

Frequently asked questions

Question Cause/solution

What should I do to display
caller information?

What should I do when noise
is heard, sound cuts in and
out?

What should I do when the
operating time seems to be
shorter even after I fully
charged the batteries?

What do I need to do to
erase y (Missed call) from
the display?

LYou must subscribe to a Caller ID service. Contact

your service provider/telephone company for
details.

LThe message “You must first subscribe

to Caller ID.” will be displayed until you

receive caller information after subscribing to a
Caller ID service.

LYou are using the handset or base unit in an area

with high electrical interference. Re-position the
base unit and use the handset away from sources
of interference.

LMove closer to the base unit.
LIf you use a DSL/ADSL service, we recommend

connecting a DSL/ADSL filter between the base
unit and the telephone line jack. Contact your
DSL/ADSL provider for details.

LClean the battery ends (S, T) and the charge

contacts with a dry cloth, and charge again.

LThere are unviewed missed calls remaining. View

them and erase y in the following way.

1 K (middle soft key) i j i M
2 Press {V} to search from the most recent call,

or press {^} to search from the oldest call.

– 6 –

TG8021E(e)_QG.fm Page 7 Thursday, May 29, 2008 3:56 PM

Registering a handset to a base unit

The supplied handset and base unit are pre-registered. If for some reason the
handset is not registered to the base unit, re-register the handset.

Handset

M

1 K (middle soft key) i N i M
2 {V}/{^}: “Registration” i M 2times
3 {V}/{^}: Select a base unit number. i M

Base unit

Press and hold {x} for about 5 seconds, until
the registration tone sounds.

LThe next step must be completed within 90

seconds.

Handset

Wait until “Enter Base PIN” is displayed. i
Enter the base unit PIN (default: “0000”). i

M

LWhen the handset has been registered

successfully, w stops flashing.

– 7 –

{x}

M

TG8021E(e)_QG.fm Page 8 Thursday, May 29, 2008 3:56 PM

Optional service (Caller ID)

If you subscribe to a Caller ID service,

012345

when viewing missed calls.

– you can identify who is calling by using different display colours

– caller information will be displayed when a call is received, or

012345

and ringer tones (phonebook category).

Sales and support information

Customer Care Centre

L For customers within the U.K.: 0844 844 3898
L For customers within the Republic of Ireland: 01289 8333
L Visit our website for product information: www.panasonic.co.uk
L E-mail: [e-mail]

Direct Sales at Panasonic U.K.

L Order accessory and consumable items for your product with ease and

confidence by phoning our Customer Care Centre Monday - Thursday 9:00am ­5:30pm, Friday 9:30am - 5:30pm (Excluding public holidays).

L Or go on line through our Internet Accessory ordering application at

www.panasonic.co.uk

L Most major credit and debit cards accepted.
L All enquiries transactions and distribution facilities are provided directly by

Panasonic U.K. Ltd.

L It couldn’t be simpler!
L Also available through our Internet is direct shopping for a wide range of finished

products, take a browse on our website for further details.

Customer Care Helpline Tel. No.: U.K. 0844 844 3898 / R.O.I. 01289 8333

– 8 –

TG8021E(e)_QG.fm Page 9 Thursday, May 29, 2008 3:56 PM

Notes

– 9 –

TG8021E(e)_QG.fm Page 10 Thursday, May 29, 2008 3:56 PM

IMPORTANT

If you have any problems operating this
product, please try the following:

1 Reconnect AC adaptor.

2 Use supplied telephone line cord.

3 Use rechargeable Ni-MH batteries.

(Alkaline batteries CANNOT be used.)

Refer to Troubleshooting in Operating Instructions

and

FAQs in this Quick Guide.

If you still have any problems, please call

the Panasonic DECT Helpline

0844 844 3898

01289 8333

Lost Operating Instructions? Download at www.panasonic.co.uk.

(Rep of Ireland)

(U.K.)