![](/html/32/32f9/32f9add75f4091f6fc09316ddd22b8863e13d417f4ec2ee0d1ec7005a1221584/bg1.png)
TG77xx_(en)_QG.fm Page 1 Tuesday, November 22, 2011 9:34 AM
Model No. KX-TG7731/KX-TG7732
Quick Guide
Setting up
Base unit
L Use only the supplied Panasonic AC adaptor PNLV226.
Press plug
firmly.
KX-TG7733/KX-TG254SK
KX-TG7741/KX-TG7742
KX-TG7743/KX-TG7745
“Click”
Correct Incorrect
*DSL/ADSL filter (not supplied) is required if you have DSL/ADSL service.
Handset
L USE ONLY Ni-MH batteries AAA (R03) size.
L Do NOT use Alkaline/Manganese/Ni-Cd batteries.
L Confirm correct polarities (S, T).
Rechargeable Ni-MH ONLY
Charger
L Use only the supplied
Panasonic AC adaptor
PNLV226.
Printed in China
Hook
To power outlet
To single-line
telephone jack
(RJ11C)
To power outlet
PNQW3019ZA TT1111MG0 (D)
DSL/ADSL filter*
CHARGE FOR
ABOUT 7 HOURS
Confirm
“Charging” is
displayed.
“Click”
![](/html/32/32f9/32f9add75f4091f6fc09316ddd22b8863e13d417f4ec2ee0d1ec7005a1221584/bg2.png)
TG77xx_(en)_QG.fm Page 2 Tuesday, November 22, 2011 9:34 AM
Operating tips
Soft keys
The handset features 3 soft keys. By pressing a soft key,
you can select the feature shown directly above it on the
display.
{C}, {MENU}, {CELL}, and other additional functions
are assigned to soft keys. Pay attention to the display to
see what functions the soft keys are assigned during
handset operation.
Volume key
Press {+} or {-} repeatedly to adjust the receiver or
speaker volume while talking.
Navigator key
− {^}, {V}, {<}, or {>}: Scroll through various lists and
items.
− {<} CID (Caller ID): View the caller list.
− {>} REDIAL: View the redial list.
{^}
V
OL.
-
HONE
P
P
S
ID
C
{<}{>}
{V}
Date and time (Handset)
1 {MENU} (1)1
2 Enter the current month, date, and year. s {OK}
3 Enter the current hour and minute (12-hour clock format).
4 {AM/PM}: Select “AM” or “PM”. s {SAVE} s {OFF}
Recording your greeting message for the answering system
for the landline (Handset)
If you use a pre-recorded greeting message, you do not need to record your own greeting
message.
1 {MENU} (3)2 s {r}: “Yes” s {SELECT}
2 After a beep sounds, hold the handset about 20 cm (8 inches) away and speak clearly into
the microphone (2 minutes max.).
3 Press {STOP} to stop recording. s {OFF}
T
AI
W
L
L
A
C
/
SH
A
L
F
L
IA
D
E
R
– 2 –
![](/html/32/32f9/32f9add75f4091f6fc09316ddd22b8863e13d417f4ec2ee0d1ec7005a1221584/bg3.png)
TG77xx_(en)_QG.fm Page 3 Tuesday, November 22, 2011 9:34 AM
Link to cell
You can use the unit to make or answer calls using a cellular line. Your cellular phones must have
®
Bluetooth
our Web site: http://www.panasonic.com/link2cell
L Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit
Registering a Bluetooth cellular phone
1 Handset:
2 Your cellular phone:
3 Handset:
4 To select which unit receives calls for the cellular line (default: “All”):
5 {OFF}
Note:
L Make sure that your cellular phone is set to connect to this product automatically. Refer to your
Trademarks
L The Bluetooth
wireless technology that is compatible with this product. For more details, please visit
during a cellular call, you may hear noise. For best performance, we recommend placing the
cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
Cell line
Cell phone
service providers
For CELL 1: {MENU} (6241
For CELL 2: {MENU} (6242
L After the CELL 1 or CELL 2 indicator on the base unit starts flashing red, the rest of the
procedure must be completed within 5 minutes.
While the CELL 1 or CELL 2 indicator is flashing red, follow the instructions of your cellular
phone to enter the registration mode.
L Depending on your cellular phone, it may ask you to enter the base unit PIN (default:
“0000”).
Wait until a long beep sounds.
L It may take more than 10 seconds to complete registration.
L When the CELL 1 or CELL 2 indicator lights green, the cellular phone is connected to the
base unit. You are ready to make cellular calls.
{OK} s {r}: Select the desired handset or “All”. s {SAVE}
L If not required, go to step 5.
cellular phone’s operating instructions.
®
marks by Panasonic Corporation is under license. All other trademarks identified herein are
the property of their respective owners.
word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such
– 3 –