TG7210-7230E(e).book Page 3 Tuesday, October 16, 2007 12:59 PM
Preparation
Introduction
Thank you for purchasing a new Panasonic digital cordless phone.
For your future reference
Attach or keep original receipt to assist with any repair under warranty.
Serial No. (found on the bottom of the base unit)
Date of purchase
Name and address of dealer
Note:
L This equipment is designed for use on the UK and Republic of Ireland analogue
telephone network.
L In the event of problems, you should contact your equipment supplier in the first
instance.
Declaration of Conformity:
L Panasonic Communications Co., Ltd. declares that this equipment is in
compliance with the essential requirements and other relevant provisions of Radio
& Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC.
Declarations of Conformity for the relevant Panasonic products described in this
manual are available for download by visiting:
http://www.doc.panasonic.de
Contact to Authorised Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
TG7210-7230E(e).book Page 7 Tuesday, October 16, 2007 12:59 PM
placed in rooms where the
Important information
General
L Use only the AC adaptor supplied with
this product, noted on page 5.
L Do not connect the AC adaptor to any
AC outlet other than a standard 220–
240 V AC outlet.
L This product is unable to make calls
when:
– the portable handset battery(ies)
need recharging or have failed.
– there is a power failure.
– the key lock feature is turned on.
L Do not open the base unit, charger, or
handset other than to replace the
battery(ies).
L Consult the manufacturer of any
personal medical devices, such as
pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
frequency) energy. (The product
operates in the frequency range of
1.88 GHz to 1.90 GHz, and the power
output is 250 mW (max.).) Do not use
the product in health care facilities if
any regulations posted in the area
instruct you not to do so. Hospitals or
health care facilities may be using
equipment that could be sensitive to
external RF energy.
L Care should be taken that objects do
not fall onto, and liquids are not spilled
into, the product. Do not subject this
product to excessive smoke, dust,
mechanical vibration or shock.
Environment
L Do not use this product near water.
L This product should be kept away
from heat sources such as radiators,
cookers, etc. It should also not be
temperature is less than 5 °C or
greater than 40 °C.
Warning:
L To prevent the risk of electrical shock,
do not expose this product to rain or
any other type of moisture.
L Unplug this product from power
outlets if it emits smoke, an abnormal
smell, or makes unusual noise. These
conditions can cause fire or electric
shock. Confirm that smoke has
stopped emitting and contact an
authorised service centre.
L Do not spill liquids (detergents,
cleansers, etc.) onto the telephone
line cord plug, or allow it to become
wet at all. This may cause a fire. If the
telephone line cord plug becomes
wet, immediately pull it from the
telephone wall jack, and do not use.
L Do not place or use this product near
automatically controlled devices such
as automatic doors and fire alarms.
Radio waves emitted from this product
may cause such devices to
malfunction resulting in an accident.
L Regularly remove any dust, etc. from
the AC adaptor/power plug by pulling
it from the power outlet, then wiping
with a dry cloth. Accumulated dust
may cause an insulation defect from
moisture, etc. resulting in a fire.
L Do not damage the power cord/plug.
This may cause a short circuit, electric
shock, and/or fire.
L Do not touch the plug with wet hands.
L The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and
is easily accessible.
TG7210-7230E(e).book Page 8 Tuesday, October 16, 2007 12:59 PM
Preparation
Battery caution
L We recommend using the battery(ies)
noted on page 6. Use only
rechargeable battery(ies).
L Do not mix old and new batteries.
L Do not dispose of the battery(ies) in a
fire, as they may explode. Check with
local waste management codes for
special disposal instructions.
L Do not open or mutilate the
battery(ies). Released electrolyte
from the battery(ies) is corrosive and
may cause burns or injury to the eyes
or skin. The electrolyte may be toxic if
swallowed.
L Exercise care when handling the
battery(ies). Do not allow conductive
materials such as rings, bracelets or
keys to touch the battery(ies),
otherwise a short circuit may cause
the battery(ies) and/or the conductive
material to overheat and cause burns.
L Charge the battery(ies) provided with
or identified for use with this product
only in accordance with the
instructions and limitations specified
in this manual.
L Only use a compatible base unit (or
charger) to charge the battery(ies). Do
not tamper with the base unit (or
charger). Failure to follow these
instructions may cause the
battery(ies) to swell or explode.
Notice for product disposal, transfer,
or return
L This product can store your
private/confidential information. To
protect your privacy/confidentiality, we
recommend that you erase the
information such as phonebook or
caller list entries from the memory
before you dispose, transfer or return
the product.
Information on Disposal for Users of
Waste Electrical & Electronic
Equipment (private households)
This symbol on the products and/or
accompanying documents means that
used electrical and electronic products
should not be mixed with general
household waste. For proper treatment,
recovery and recycling, please take
these products to designated collection
points, where they will be accepted on a
free of charge basis. Alternatively, in
some countries you may be able to
return your products to your local retailer
upon the purchase of an equivalent new
product.
Disposing of this product correctly will
help to save valuable resources and
prevent any potential negative effects on
human health and the environment
which could otherwise arise from
inappropriate waste handling. Please
contact your local authority for further
details of your nearest designated
collection point.
Penalties may be applicable for incorrect
disposal of this waste, in accordance
with national legislation.
For business users in the European
Union
If you wish to discard electrical and
electronic equipment, please contact
your dealer or supplier for further
information.
TG7210-7230E(e).book Page 9 Tuesday, October 16, 2007 12:59 PM
Information on Disposal in other
Countries outside the European
Union
This symbol is only valid in the European
Union.
If you wish to discard this product,
please contact your local authorities or
dealer and ask for the correct method of
disposal.
Controls
Base unit (KX-TG7210/KX-TG7212/
KX-TG7213/KX-TG7214)
A Charge contacts
B {x} (Page)
Base unit (KX-TG7230/KX-TG7232/
KX-TG7233/KX-TG7234)
Preparation
AB
BACDE
FG H IJ
A Speaker
B {4} (Erase)
C {7} (Repeat)
D {8} (Skip)
E {s} (Answer on)/
Answer on indicator
F Charge contacts
G {x} (Page)
H {<}{>} (Volume)
I {6} (Play)/Message indicator
J {■} (Stop)
TG7210-7230E(e).book Page 10 Tuesday, October 16, 2007 12:59 PM
Preparation
Handset
A
B
C
D
E
F
G
A Speaker
B {j/OK} (Menu/OK)
C {k} (Phonebook)
D {C} (Talk)
E Navigator key ({^}/{V}/{>}/{<})/
? (Receiver volume: {^}{V})
F {s} (Speakerphone)
G {R} (Recall)
H Receiver
I Display
J {R} (Redial/Pause)
K {ih} (Off/Power)
L {C/T} (Clear/Mute)
M Dial keypad
N {INT} (Intercom)
O Microphone
P Charge contacts
H
I
J
K
L
M
N
O
P
Using the navigator key
Press {^}, {V}, {<}, or {>} to navigate
through menus and to select items
shown on the display.
Adjusting the receiver or speaker
volume (?)
Press {^} or {V} while on a call.
{^}
{<}{>}
{V}
Displays
Display icons
IconMeaning
wWithin range of a base
unit
L When flashing:
Handset is searching
for base unit.
(page 37)
LHandset is accessing
kHandset is on an outside
uAnswering system is
5Battery level
base unit. (intercom,
paging, changing base
unit settings, etc.)
Connect the telephone line cord until it
clicks into the base unit and telephone
line jack (A). Connect the AC adaptor
cord (B) by pressing the plug firmly (C).
Base unit
C
C
Hook
A
B
USE ONLY the
supplied AC adaptor.
To AC mains outlet
(220–240 V, 50 Hz)
To telephone line
USE ONLY the supplied
cord.
Hooks
B
To AC mains outlet
(220–240 V, 50 Hz)
USE ONLY the supplied
AC adaptor (smaller).
Note:
L Never install telephone wiring during a
lightning storm.
L The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L The AC adaptor should be connected
to a vertically oriented or floormounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
L The unit will not work during a
power failure. We therefore
recommend you also connect a
corded-type telephone (without AC
adaptor) to the same telephone line
using a T-adaptor. Your Panasonic
sales shop can offer you more
TG7210-7230E(e).book Page 13 Tuesday, October 16, 2007 12:59 PM
When the batteries are fully charged,
“Charge Completed” will be
displayed.
Base unit
*1 The pictured model is KX-TG7210.
*2 KX-TG7212/KX-TG7213/
Note:
L It is normal for the handset to feel
L If you want to use the unit
L Clean the charge contacts of the
Battery level
*1
KX-TG7214/KX-TG7232/
KX-TG7233/KX-TG7234
warm during charging.
immediately, charge the batteries for
at least 15 minutes.
handset, base unit, and charger with a
soft, dry cloth once a month. Clean
more often if the unit is subject to the
exposure of grease, dust, or high
humidity.
full capacity at the initial charge.
Maximum battery performance is
reached after a few complete cycles of
charge/discharge (use).
L Actual battery performance depends
on a combination of how often the
handset is in use and how often it is
not in use (standby).
L Even after the handset is fully
charged, the handset can be left on
the base unit or charger without any ill
effect on the batteries.
L The battery level may not be
displayed correctly after you replace
the batteries. In this case, place the
handset on the base unit or charger
and let it charge for at least 7 hours.