Page 1
TG7200_7220E(e)_QG.fm Page 1 Tuesday, May 15, 2007 9:42 AM
Model No.
KX-TG7200E/KX-TG7202E
Digital Cordless Answering System
Model No.
KX-TG7220E/KX-TG7222E
KX-TG7223E/KX-TG7224E
Quick Guide
Connections
Digital Cordless Phone
KX-TG7203E
Base unit
“Click”
To telephone line
USE ONLY the supplied cord.
Important:
LIf you use a telephone line cord which is not supplied, the unit may not work
properly.
Charger
(KX-TG7202/KX-TG7203/KX-TG7222/KX-TG7223/KX-TG7224)
USE ONLY the supplied AC adaptor.
Hooks
To AC mains outlet
(220–240 V, 50 Hz)
Press plug firmly.
Hook
To AC mains outlet
(220–240 V, 50 Hz)
Press plug firmly.
USE ONLY the supplied AC adaptor (smaller).
PQQW15742ZA DC0407DS0
Page 2
TG7200_7220E(e)_QG.fm Page 2 Tuesday, May 15, 2007 9:42 AM
Battery installation/Battery charge
Initial charge: 7 hours
Rechargeable
Ni-MH ONLY
Note:
LUSE ONLY rechargeable Ni-MH batteries.
LDo NOT use Alkaline/Manganese/Ni-Cd batteries.
Base unit
*1 The pictured model is KX-TG7200.
*2 KX-TG7202/KX-TG7203/KX-TG7222/
KX-TG7223/KX-TG7224
Operating tips
Using the navigator key
Press {^}, {V}, {<}, or {>} to navigate
through menus and to select items shown
on the display.
Adjusting the receiver or speaker
volume (?)
Press {^} or {V} while on a call.
{<}{>}
*1
“Charging” will
be displayed.
{^}
{V}
Charger
*2
Date and time
1 {j/OK}
2 Press {^} or {V} to select “Handset Setup”. i {>}
3 Proceed with the operation for your model.
NKX-TG7200/KX-TG7202/KX-TG7203
Press {^} or {V} to select “Set Date & Time”. i {>}
NKX-TG7220/KX-TG7222/KX-TG7223/KX-TG7224
Press {^} or {V} to select “Time Settings”. i {>} i Press {^} or {V} to
select “Set Date & Time”. i {>}
4 Enter the current date, month, and year.
5 Enter the current hour and minute.
6 {j/OK} i {ih}
– 2 –
Page 3
TG7200_7220E(e)_QG.fm Page 3 Tuesday, May 15, 2007 9:42 AM
Basic operations
C Making/Answering calls (Handset)
Making calls Dial the phone number. i {C}/{s}
Answering calls {C}/{s}
Hanging up {ih}
Receiver/speaker volume Press {^} or {V} while on a call.
Making a call using the redial
list
Handset ringer volume 1 {j/OK}
k Phonebook (Handset)
Adding entries (names and
phone numbers)
Making calls 1 {k}
I Answering system (Base unit):
KX-TG7220/KX-TG7222/KX-TG7223/KX-TG7224
Answering on/off Press {s} to turn on/off the answering system.
Listening to messages {6}
{R} i {^}/{V}: Select the desired number. i
{C}
2 {^}/{V}: “Handset Setup” i {>}
3 {^}/{V}: “Ringer Setup” i {>}
4 {^}/{V}: “Ringer Volume” i {>}
5 {^}/{V}: Select the desired volume. i {>} i
{ih}
1 {k} i {j/OK}
2 {^}/{V}: “New Entry” i {>}
3 Enter the party’s name (16 characters max.). i
{j/OK}
4 Enter the party’s phone number (24 digits max.).
i {j/OK}
5 {^}/{V}: “Save” i {>} i {ih}
LTo enter a name, see the character table in the
operating instructions.
2 {^}/{V}: Select the desired entry. i {C}
– 3 –
Page 4
TG7200_7220E(e)_QG.fm Page 4 Tuesday, May 15, 2007 9:42 AM
Frequently asked questions
Question Cause & solution
Why is w flashing? LThe handset is too far from the base unit. Move
What should I do when the
handset does not turn on?
How long is the battery
operating time?
Can I keep the handset on
the base unit or charger
when I am not using it?
When should I replace the
batteries?
What is a PIN? LThe PIN is a 4-digit number that must be entered
What do I need to do to
display caller information?
closer.
LThe base unit AC adaptor is not connected.
Check the connections.
LYou are using the handset or base unit in an area
with high electrical interference. Place the
handset and base unit away from interference
sources, such as antennas and mobile phones.
LThe handset is not registered to the base unit.
Register it (page 6).
LMake sure that the batteries are installed
correctly.
LFully charge the batteries.
LClean the charge contacts and charge again.
LWhen you are using fully-charged Ni-MH batteries
(supplied batteries);
In continuous use: 17 hours max.
In continuous standby mode: 180 hours max.
LIt is normal for batteries not to reach full capacity
at the initial charge. Maximum battery
performance is reached after a few complete
cycles of charge/discharge (use).
LActual battery performance depends on a
combination of how often the handset is in use
and how often it is not in use (standby).
LEven after the handset is fully charged, the
handset can be left on the base unit or charger
without any ill effect on the batteries.
LIf the batteries are fully charged until 5 is
displayed, but
replace the batteries with new ones.
in order to change certain base unit settings. The
default PIN is “0000”.
LYou need to subscribe to Caller ID service.
Consult your service provider/telephone company
for details.
LThe message “You must first subscribe
to Caller ID.” will be displayed until you
receive caller information after subscribing to
Caller ID service.
7
is displayed after a few calls,
– 4 –
Page 5
TG7200_7220E(e)_QG.fm Page 5 Tuesday, May 15, 2007 9:42 AM
Frequently asked questions
What should I do when:
– I hear static or sound cuts
in and out?
– there is interference from
other electrical units?
What should I do when the
operating time seems to be
short even after I fully
charged the batteries?
What do I need to do to
erase the missed call
number (for example,
“3 Calls”) from the
display?
LPlace the handset and the base unit away from
other electrical appliances.
LMove closer to the base unit.
LYour unit is connected to a telephone line with
DSL service. We recommend connecting a filter
(contact your DSL service provider) to the
telephone line between the base unit and the
telephone line jack.
LWipe the battery ends (S, T) and the unit
contacts with a dry cloth.
LThere are unviewed missed calls remaining. View
them using the following method.
1 {j/OK}
2 {^}/{V}: “Caller List” i {>}
3 Press {V} to search from the most recent call,
or press {^} to search from the oldest call.
– 5 –
Page 6
TG7200_7220E(e)_QG.fm Page 6 Tuesday, May 15, 2007 9:42 AM
Registering a handset to the base unit
The supplied handset and base unit are pre-registered. When you purchase an
additional handset, refer to the additional handset’s installation manual for
registration. If for some reason the handset is not registered to the base unit, register
the handset.
1 {j/OK}
2 {^}/{V}: “Handset Setup” i {>}
3 {^}/{V}: “Registration” i {>}
4 {^}/{V}: “Register H.set” i {>}
5 Proceed with the operation for your model.
NKX-TG7200/KX-TG7202/KX-TG7203
Press and hold {x} on the base unit for
about 5 seconds. (No registration tone)
NKX-TG7220/KX-TG7222/KX-TG7223/
KX-TG7224
Press and hold {x} on the base unit for
about 5 seconds, until the registration tone
sounds.
{j/OK}
{x}
6 Wait until “Enter Base PIN” is displayed.
i Enter the base unit PIN (default: “0000”).
i {j/OK}
– 6 –
{x}
{j/OK}
Page 7
TG7200_7220E(e)_QG.fm Page 7 Tuesday, May 15, 2007 9:42 AM
Optional service (Caller ID)
If you subscribe to Caller ID service, you can:
012345
– display caller information
Sales and support information
Customer Care Centre
L For customers within the UK: 0844 844 3898
L For customers within the Republic of Ireland: 01289 8333
L Visit our website for product information: www.panasonic.co.uk
L E-mail: customer.care@panasonic.co.uk
Direct Sales at Panasonic UK
L Order accessory and consumable items for your product with ease and
confidence by phoning our Customer Care Centre Monday - Thursday 9:00am 5:30pm, Friday 9:30am - 5:30pm (Excluding public holidays).
L Or go on line through our Internet Accessory ordering application at
www.panasonic.co.uk
L Most major credit and debit cards accepted.
L All enquiries transactions and distribution facilities are provided directly by
Panasonic UK Ltd.
L It couldn’t be simpler!
L Also available through our Internet is direct shopping for a wide range of finished
products, take a browse on our website for further details.
Customer Care Helpline Tel. No.: U.K. 0844 844 3898 / R.O.I. 01289 8333
– 7 –
Page 8
TG7200_7220E(e)_QG.fm Page 8 Tuesday, May 15, 2007 9:42 AM
IMPORTANT
0844 844 3898 (UK)
01289 8333 (Repl of Ireland)
If you have problems setting up
or operating this product please
call the Panasonic DECT Helpline
Loading...