TG77xx_(en)_QG.fm Page 1 Wednesday, December 12, 2012 10:44 AM
Model No. KX-TG7731/KX-TG7732
KX-TG7733/KX-TG254SK
KX-TG294SK/KX-TG7741
KX-TG7742/KX-TG7743
Quick Guide KX-TG263SK/KX-TG273SK KX-TG7745
Setting up
Base unit |
|
|
|
|
|
L Use only the supplied Panasonic AC adaptor PNLV226. |
“Click” |
|
|||
Press plug |
|
|
|
|
|
firmly. |
|
|
|
|
|
Correct |
Incorrect |
Hook |
To power outlet |
|
|
|
|
||||
|
|
|
|
||
|
|
|
To single-line |
|
|
|
|
|
telephone jack |
|
|
|
|
|
(RJ11C) |
DSL/ADSL filter* |
“Click” |
|
|
|
|
|
*DSL/ADSL filter (not supplied) is required if you have DSL/ADSL service.
Handset
L USE ONLY Ni-MH batteries AAA (R03) size.
L Do NOT use Alkaline/Manganese/Ni-Cd batteries. L Confirm correct polarities (S, T).
Rechargeable Ni-MH ONLY
CHARGE FOR ABOUT 7 HOURS
Confirm
“Charging” is displayed.
Charger |
|
L Use only the supplied |
To power outlet |
|
|
Panasonic AC adaptor |
|
PNLV226. |
|
Printed in China PNQW3019YA TT1111MG2122 (D)
TG77xx_(en)_QG.fm Page 2 Wednesday, December 12, 2012 10:44 AM
Operating tips |
|
Soft keys |
|
The handset features 3 soft keys. By pressing a soft key, |
|
you can select the feature shown directly above it on the |
|
display. |
|
{C}, {MENU}, {CELL}, and other additional functions |
|
are assigned to soft keys. Pay attention to the display to |
|
see what functions the soft keys are assigned during |
|
handset operation. |
|
Volume key |
|
Press {+} or {-} repeatedly to adjust the receiver or |
|
speaker volume while talking. |
|
Navigator key |
|
− {^}, {V}, {<}, or {>}: Scroll through various lists and |
|
items. |
|
− {<} CID (Caller ID): View the caller list. |
{^} |
− {>} REDIAL: View the redial list. |
{<}{>}
{V}
Date and time (Handset)
1{MENU} (1)1
2Enter the current month, date, and year. s{OK}
3Enter the current hour and minute (12-hour clock format).
4{AM/PM}: Select “AM” or “PM”. s{SAVE} s{OFF}
Recording your greeting message for the answering system for the landline (Handset)
If you use a pre-recorded greeting message, you do not need to record your own greeting message.
1{MENU} (3)2 s{r}: “Yes” s{SELECT}
2After a beep sounds, hold the handset about 20 cm (8 inches) away and speak clearly into the microphone (2 minutes max.).
3Press {STOP} to stop recording. s{OFF}
– 2 –
TG77xx_(en)_QG.fm Page 3 Wednesday, December 12, 2012 10:44 AM
Link to cell
You can use the unit to make or answer calls using a cellular line. Your cellular phones must have Bluetooth® wireless technology that is compatible with this product. For more details, please visit our Web site: http://www.panasonic.com/link2cell
L Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
Cell line
Cell phone service providers
Registering a Bluetooth cellular phone
1Handset:
For CELL 1: {MENU} (6241 For CELL 2: {MENU} (6242
L After the CELL 1 or CELL 2 indicator on the base unit starts flashing red, the rest of the procedure must be completed within 5 minutes.
2Your cellular phone:
While the CELL 1 or CELL 2 indicator is flashing red, follow the instructions of your cellular phone to enter the registration mode.
L Depending on your cellular phone, it may ask you to enter the base unit PIN (default:
“0000”).
3Handset:
Wait until a long beep sounds.
L It may take more than 10 seconds to complete registration.
L When the CELL 1 or CELL 2 indicator lights green, the cellular phone is connected to the base unit. You are ready to make cellular calls.
4To select which unit receives calls for the cellular line (default: “All”): {OK} s{r}: Select the desired handset or “All”. s{SAVE}
L If not required, go to step 5.
5{OFF}
Note:
L Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phone’s operating instructions.
Trademarks
LThe Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. All other trademarks identified herein are the property of their respective owners.
–3 –