Panasonic KX-TD7895 User Manual

Specifications and Main Features

– Model No: KX-TD7895

– Frequency: 900MHz

– Talk range: There are more than two base stations and needs at least 10 feet (3 meters) to operate.

– Battery type: Rechargeable battery

– Initial use charging time: Roughly five hours

– Talk time: About five hours per full charge

– Standby time: Up to about a week during a full charge

– Ringer volume settings: Three, namely low, middle, and high

Other functions: Auto talk, any key answer, message waiting, call forwarding, do not disturb, conference call and intercom

– Display: 2 line LCD that comprises 16 characters per line

– Accessories included are AC Adaptor, Telephone Handset Clip, Belt Holder, Wall Mounting Plate and Screws, Two Line Cords, Four Washers

– Connection modes: EMSS or Electronic Modular Switching System, SLT mode supported.

– Flexible key buttons: F1 to F12 which connect lines and other features.

KX-TD7895’s maximum talk time is approximately equal to?
About five hours when fully charged.
KX-TD7895’s battery takes around 5 hours to charge. Why does it need that much time?
Because five hours of time is required to thoroughly recharge KX-TD7895’s battery.
Is it possible to operate the KX-TD7895 in a power failure?
How far apart should multiple base units be?
Is it possible to perform intercom calls using this phone?
Which type of battery is needed for the KX-TD7895?
How do I turn on the Do Not Disturb option?
What should I do if the battery charge indicator continuously flashes?
No, this device will be unable to work during a power cut.
Always keep at a distance of 3 meters when using more than 2 base units.
It is intercom compatible as well.
The rechargeable batteries which are specifically meant for this model are being used.
You can program the handset when it is idle as a mean to activate the Do Not Disturb feature.
Ensure to replace the battery if the issue persiste as these will indicate insufficient charge.

+ 33 hidden pages