Dealers must be KX-TD500 certified to purchase and install a KX-TD500 system. A certified dealer
must meet the requirements for certification, successfully complete the KX-TD500 technical training
course and be issued a KX-TD500 dealer ID number.
KX-TD500
The KX-TD500 Digital Super Hybrid System has a modular design that allows you to tailor
the system to meet your customers current and future needs. The system consists of two
types of components, shelves and plug in expansion cards.
There are two shelf types:
The Basic Shelf which has 14 card slots, two of which are dedicated to the Central
Processing Unit (CPU) and the Time Switch cards. The 12 remaining are universal card
slots.
The second is the Expansion Shelf, which has 14 universal card slots. Up to two
expansion shelves can be added to the basic shelf to reach the maximum system capacity
of 512 ports. Plug in expansion units are installed in the universal card slots on each shelf.
There are several types of plug in expansion cards, each of which is designed to connect
to specific type telephones, lines from the telephone company or to add feature to the
system. Each expansion card requires a specific quantity of ports in the system. In addition, there is a limit to quantity of cards that can be installed on a shelf or in the system.
To assist with the configuration of the KX-TD500 system, please refer to charts 1, 2 and 3
on pages 13 and 14.
Model
NumberDescriptionUnitsWeight
Basic Shelf
The basic shelf has 12 universal card slots. 196 ports at
maximum configuration. The system is expandable up to 512
ports with the addition of up to 2 (max) KX-TD520. Comes
KX-TD500
equipped with KX-TD50102 Time Switch Card; KX-TD50104
Conference Card; KX-TD50105 DOHCA Card; and KX-TD50103
Power Supply. The Central Processing Unit (CPU) is not included.
The CPU must be purchased separately from Panasonic
Services Company National Parts Center. Refer to CPU order
procedure on page 15.
1
50.2 lbs.
UPC
Code
0-37988-
82572-1
Expansion Shelf
The Expansion Shelf has 14 universal card slots (216 ports at
KX-TD520
KX-TD50101-1
KX-TD500
Spares Kit
Units, Weights and Specifications subject to change.
maximum configuration). Comes equipped with a cabinet power
supply. A maximum of 2 can be added to the KX-TD500 Basic
Shelf.
Central Processing Unit (CPU) Card
Required with Basic Shelf.
Must be purchased from Panasonic Services Company
National Parts Center. Refer to CPU Spares Kit order
procedure on page 15.
Spares Kit
Includes 1 KX-TD50101-1 CPU Card; 1 KX-TD50102 Time Switch
Card; and 1 KX-TD50103 Power Supply. One Spares Kit must be
purchased by each KX-TD500 certified dealer when they purchase
their first CPU Card (KX-TD50101-1). Must be purchased from
Panasonic Services Company National Parts Center. Refer to
CPU Spares Kit order procedure on page 15.
Spares Parts Kit
1
N/A
N/A
34.1 lbs.
N/A
N/A
82573-8
N/A
N/A
2
Model
NumberDescription
KX-TD500 Expansion Cards and Accessories
Station Cards
Hybrid Line Circuit Card (HLC)
8 ports per card. Requires one card slot. Supports analog proprietary,
KX-T96170
KX-T96172
KX-T96174
single line and DSS consoles. All ports are equipped with power failure
transfer for single line telephones. OHCA will operate on KX-T7130,
requires KX-T96136. When KX-T7441 DSS console is connected to this
card, the ANSWER and RELEASE will not function.
Proprietary Line Card (PLC)
8 ports per card. Requires one card slot. Supports analog proprietary
telephones and DSS consoles. OHCA will operate on KX-T7130 only,
requires KX-T96136. When KX-T7441 DSS console is connected to this
card, the ANSWER and RELEASE will not function.
Single Line Telephone Circuit Card (SLC)
8 ports per card. Requires one card slot. Supports single line
telephones only. All ports are equipped with power failure transfer.
Per Master Carton
UnitsWeight
34.7lbs.82009-2
3
3
3.9 lbs.
4.5 lbs.
UPC
Code
0-37988-
82010-8
82011-5
KX-T96175
KX-T96185
KX-T96186
KX-TD50170
KX-TD50172
Single Line Telephone Circuit Card (SLC-M)
8 ports per card. Requires one card slot. Supports single line
telephones with and without message waiting lamps. All ports are
equipped with power failure transfer.
Off Premise Extension Card (OPX)
4 ports per card. Requires one card slot. Supports single line
telephones only. One KX-T96186 Off Premise Extension Power Unit
required per card.
Off Premise Extension (OPX) Power Unit
Required with each KX-T96185
Digital Hybrid Line Card (DHLC)
8 ports per card. Requires one card slot. Supports digital and analog
proprietary, single line and DSS console. All ports are equipped with
power failure transfer for single line telephones. OHCA will operate
on KX-T7235 & KX-T7436 only.
Digital Proprietary ITS Line Card (DLC)
16 ports per card. Supports digital proprietary and DSS console.
OHCA will operate on KX-T7235 & KX-T7436 only.
3
3
3
34.2 lbs.82574-5
3
5.2 lbs.
4.6 lbs.
5.5 lbs.
3.8 lbs.
82022-1
82015-3
82016-0
82575-2
Enlarged Single Line Card with Message Waiting (ESLC)
KX-TD50175
Units, Weights and Specifications subject to change.
16 ports per card. Supports single line telephones equipped
with message waiting lamps. Ports 1 - 8 are equipped with
power failure transfer.
3
4.8 lbs.
82576-9
3
Model
NumberDescription
Trunk Cards
Per Master Carton
UnitsWeight
UPC
Code
0-37988-
KX-T96180
KX-T96181
KX-T96182
KX-T96187
KX-TD50180
KX-TD50290
Loop Start Central Office Trunk Card (LCOT)
8 ports per card. Each card requires one card slot. All ports have
power failure transfer.
Ground Start Central Office Trunk Card (GCOT)
8 ports per card. Each card requires one card slot. All ports have
power failure transfer.
Direct Inward Dialing Card (DID)
4 ports per card. Each card requires one card slot, supports Pulse
Service only.
T-1 Digital Trunk Card (T-1)
24 ports per card. Each card requires two card slots, Maximum of 3
cards per shelf. Maximum of 8 cards per system (192 DS-O’s).
Channels assignable as LCO, GCO, DID, OPX or TIE (E&M) Voice Only,
an external Channel Service Unit (CSU) required.
Enhanced Loop Start CO Trunk Card (ELCOT)
8 ports per card. Each card requires one card slot. Supports Caller ID
service. Caller ID requires the KX-TD193. Two KX-TD193 cards can be
mounted on the ELCOT. All ports have power failure transfer.
ISDN Primary Rate Card (PRI)
24 ports per card, 23 B channels 1 D channel. Each card requires two
slots. Maximum of 6 cards per system. Supports LCO, GCO, DID,
OPX or TIE. Requires an external Digital Service Unit (DSU).
82012-234.9 lbs.
3
3
1
3
3
5.0 lbs.82013-9
4.7 lbs.
1.0 lbs.
4.8 lbs.
3.8 lbs.
82014-6
82023-8
82577-6
82602-5
Resource and Feature Cards
KX-T96191
KX-T96193
KX-T96196
KX-TD50197
KX-T96136
Units, Weights and Specifications subject to change.
* Maximum of one Remote Circuit Card per system.
Direct Inward System Access Card (DISA)
Each card requires one card slot. Maximum of 8 per system.
Automatic Gain Control Trunk Card (AGC)
Each card requires one card slot. Maximum of 8 per system.
* Remote Circuit Card (RMT)
Each card requires one card slot. Maximum of 1 per system.
Required for remote administration. 300/1200 BPS Modem.
* Enhanced Remote Circuit Card (ERMT)
Each card requires one card slot. Maximum of 1 per system.
Required for remote administration. V.34 BPS Modem.
Off Hook Call Announce Card (OHCA)
Required for OHCA feature on the KX-T7130 proprietary telephone.
2 circuits per card. Up to 4 mount on either the KX-T96170 and
the KX-T96172 cards.
3
3
3
3
8
4.1 lbs.
3.6 lbs.
3.6 lbs.
4.2 lbs.
1.0 lbs.
82017-7
82018-4
82019-1
82589-9
82005-4
4
Model
NumberDescription
Resource and Feature Cards (Continued)
Per Master Carton
UnitsWeight
UPC
Code
0-37988-
KX-T96161
KX-TD193
KX-A46
KX-T30865
KX-T7880
Door Phone Card (DPH)
Each card requires one card slot. Maximum of 2 per system.
4-door phones and 4-door openers per card.
Caller ID Card
Required to receive caller ID information from the CO. Mounts on the
KX-TD50180, ELCOT card. 4 circuits per card. 2 per ELCOT card.
System Accessories
Back-Up Battery Unit
• Includes Battery Charger, Overdischarge Protector,
and Overcurrent Protector
• Batteries and Cables not included, One Required per Shelf.
Door Intercom
Maximum of 8 per system requires the KX-TD96161.
Proprietary Wireless Telephones
Proprietary Wireless Multi-Line Telephone
• Operation Frequency 902-928 Mhz
• 30 Channel Auto Scanning
• Separate Charging Unit
• Dual Mode (SLT or APITS)
• 1 Intercom Button and 3 Programmable Line Buttons (APITS Mode)
• Talk Button • Auto Button • Transfer Key
• Redial Key • Flash Key
• Conference/Pause Button • Hold Button
• Wall Mountable Base Unit
• Includes two KX-A43 NiCad Batteries
3
3
3
3
39.9 lbs.82519-6
3.9 lbs.
1.1 lbs.
6.4 lbs.
1.9 lbs.
82008-5
81060-4
80162-6
81003-1
KX-T7885
KX-TD7894
Units, Weights and Specifications subject to change.
Proprietary Wireless Multi-Line Telephone
• Operation Frequency 902-928 Mhz
• 12 CO Line Capability
• 3 Line Multifunction LCD Display
• Message Waiting • Caller ID (APITS)
• Headset Jack
• Programmable Ringing or Vibrator
• Dual Mode (SLT or APITS)
• 30 Channel Auto Scanning
• Separate Charging Unit
• Remote Locatable Antenna
• One Long Life, Fast Charge Nickel-Metal Hydride Battery Included
DIGITAL SPREAD SPECTRUM (SST) MULTI-LINE TELEPHONE