Panasonic KX-TCD755E Operating Instructions Manual

Caller ID and SMS Compatible

Please read before use and save.
Charge the batteries for approx. 15 hours before initial use

Model No:

KX-TCD755E

Digital C

ordless Phone

Operating Instructions

Safety Information . . . . . . . . . . . . .2

Setting up . . . . . . . . . . . . . . . . . . . .3

Using the Telephone . . . . . . . . . . . .5

Using the Phonebook . . . . . . . . . . .9

SMS Feature (Text Messaging) . . .13

Additional Features . . . . . . . . . . . .20

Handset Settings . . . . . . . . . . . . .21

Base Unit Settings . . . . . . . . . . . .25

Initial Settings . . . . . . . . . . . . . . .28

For Optional Multi Unit Users . . . .29

Walkie -Talkie . . . . . . . . . . . . . . . .33

Optional Accessories . . . . . . . . . .35

Before Requesting Help . . . . . . . .36

Technical Information . . . . . . . . . .38

SMS Character Table . . . . . . . . . .39

Phonebook Character Table . . . . .40

Guarantee . . . . . . . . . . . . . . . . . . .41

Index . . . . . . . . . . . . . . . . . . . . . . .42

Safety Information

2 Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333

General Safety

Only use the power supply included
with the product.

Do not connect the AC Adaptor to any
AC outlet other than the
standard AC220-240V.

The apparatus is approved for use
with PQLV19E power supply.

This apparatus is unable to make
emergency telephone calls under the
following conditions:

The portable handset batteries
need recharging, or have failed.

During a mains power failure.
When the Key Lock is set to

ON.
When the unit is in Direct Call

mode.

Do not open the base unit or handset
(other than to change the batteries).

This apparatus should not be used
near emergency/intensive care
medical equipment and should not be
used by people with pacemakers.

Care should be taken that objects do
not fall onto, and liquids are not
spilled into the unit. Do not subject
this unit to excessive smoke, dust,
mechanical vibration or shock.

Environment

Do not use this unit near water.
This unit should be kept away from

heat sources such as radiators,
cookers, etc. It should also not be
placed in rooms where the
temperature is less than 5oC or
greater than 40oC.

The AC Adaptor is used as the main
disconnect device, ensure that the AC
outlet is located / installed near the
unit and is accessible.

WARNING:

TO PREVENT THE RISK OF
ELECTRICAL SHOCK, DO NOT
EXPOSE THIS PRODUCT TO
RAIN OR ANY OTHER TYPE OF

MOISTURE.

Battery Caution

Use only specified batteries.

Only use rechargeable batteries.

Do not mix old and new batteries.
Do not dispose of batteries in a fire,

they may explode. Check local waste
management codes for special
disposal instructions.

Do not open or mutilate the
batteries. Released electrolyte is
corrosive and may cause burns or
injury to the eyes or skin. The
electrolyte may be toxic if swallowed.

Exercise care in handling the
batteries in order not to short the
batteries with conductive materials
such as rings, bracelets and keys. The
batteries and/or conductor may
overheat and cause burns.

Charge the batteries provided in
accordance with the information
given in this operating guide.

Setting Up

Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333 3

Setting Up

Insert the Batteries

Please ensure the batteries are
inserted as shown.

#

$

%

&

Hook

Fasten the AC adaptor cord to
prevent it from being disconnected.

The AC Adaptor must remain
connected at all times. (It is normal
for the adaptor to feel warm during
use).

Location

For maximum distance noise-free
operation, place your base unit:

-Away from electrical appliances such
as TV, radio, personal computer or
another phone.

-In a convenient high and central
location.

Accessories (Included)

AC Adaptor 1
PQLV19E

Telephone Line 1
Cord
PQJA87S

Batteries 2 batteries
(AA Size)

HHR-6P/2SA-1
(1 pack contains 2xAA (R6) P-6P
batteries).

Belt Clip 1
PQKE10120Z3

Battery Cover 1
PQKK10109Y8
Operating 1

Instructions
QUQX00046Y
SMS Manual 1

QUQX00088Z
Quick Guide 1

QUQW00049Z

Additional accessories are available
for purchase. Contact your Panasonic
Customer Care Helpline for further
details.

 U.K. 08700 100 076

R.O.I. 01289 8333

Connection

Plug in the AC adaptor and the
telephone line cord in order #, $, %.

WARNING:

DO NOT CONNECT THE
TELEPHONE LINE CORD TO
THE PHONE SOCKET & UNTIL
THE HANDSET IS FULLY
CHARGED.

6v

LINE

Setting Up

4 Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333

Using the Belt Clip

You can hang the handset on your
belt or pocket using the belt clip.

To remove the belt
clip.

Wall Mounting

This unit can be mounted on a wall.
Insert screws into wall. The centres of

the screw holes should be 6cm
vertically apart.

Connect the AC adaptor and the
telephone line cord.

Arrange the wires as shown, then
mount the unit.

6cm

Notice

Some features described in these
Operating Instructions/Quick Guide
are dependent upon subscription to
your Network provider (e.g Caller
ID).

All features of this type will be
marked throughout the manual with
these icons.

Please note throughout these
Operating Instructions/Quick Guide
that the word “PRESS” is depicted
by this symbol

ZZ

.

Using the Telephone

Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333 5

Battery Charging

(Before Initial Use)

! The batteries must be charged
for approximately 15 hours
before initial use.

After the batteries have been inserted
into the handset, place the handset in
the powered up base unit.

(The telephone line cord must not
be connected to the telephone
socket at this time. Please leave
your standard telephone
connected until battery charging
is complete).

The batteries are fully charged only
when

ÒÒ

is flashing.

(After Initial Use)

When the battery icon flashes (and, if
programmed, battery low alarm
sounds), the handset should be
charged immediately because there is
little energy left in the batteries.

Battery Life

Battery life is dependent on use and
conditions but in general when using
fully charged Ni-MH batteries:
Talk time: 20hrs approx.
Talk time (Walkie-Talkie mode):
12hrs approx.
Standby time: 200hrs approx.

(Times indicated are for peak
performance).

The batteries reach peak performance
after several full charges.

The batteries cannot be overcharged
unless they are repeatedly removed
and replaced.

If battery life is shortened then
please check that battery and charge
terminals are clean.

For maximum battery life it is
recommended that the handset is not
recharged until battery icon flashes
(

ÛÛ

).

Replacing the batteries

If the

ÛÛ

icon flashes after a few
telephone calls even when the
handset batteries have been fully
charged, the batteries must be
replaced.

! Charge new batteries for
approximately 15 hours before
initial use.

(The telephone line cord must not
be connected to the telephone
socket at this time).

Power the handset off before
removing the old batteries.

If the batteries are removed, the
battery icon is reset to

ÛÛ

(less than
30% capacity). In this case, even if
fully charged batteries are fitted, the
icon remains as

ÛÛ

until a full

charge cycle is complete.
Please use only Panasonic AA(R6)

P-6P (Ni-MH) batteries.

Turning the Power ON/OFF

Tur n Power ON

ZZ

and hold

PP

until a

confirmation tone sounds.

When the button is released, the
display changes to the standby mode.

Tur n Power OFF

From the standby mode,

ZZ

and

hold

PP

until a long tone sounds.

The display goes blank. If you put the
handset in the base unit, the battery
icon will display.

Using the Telephone

6 Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333

Answering Calls

When the phone rings,

ZZOO,KK--II,NN,__,LL

, or

ZZ ^^

and talk into the

microphone.

When an external call is incoming,
you can temporarily turn off the
handset ringer.

During an incoming call, Z and
hold U. “Ring Off” is displayed and
the handset ringing stops. (This
function will not work when the
handset is on the base unit or if an
internal call is incoming.)

Making Calls

ZZ^^

.

Dial the number.

When the other party anwers,
talk into the microphone.

When you are finished with the
call,

ZZPP

.

For best performance, please note the
following:

Talk alternately with the caller
in a quiet environment.

If either party has difficulty
hearing, ZS / U to change
the volume accordingly.

During conversation you can
switch to hands-free by pressing
^. To switch back to the
receiver, ZO or ^.

While having a conversation in
speakerphone mode, the battery
life will be considerably reduced.

Tur ning the Mic On / Off

During a telephone conversation, you
can mute the Mic. When the Mic is
turned off, it disables the caller from
hearing your conversation. For
example, if you want to say
something to someone in the same
room as yourself without the caller
being able to hear your conversation.

During a conversation,

ZZ

.

The Mic is turned off.

To return to the conversation,

ZZ

.

Handset Locator / Paging

Using this feature you can locate
a misplaced handset by paging.

ZZÏÏ

on the base unit.

All handsets ring for 1 minute.

ZZÏÏ

again or

ZZOO, NN, KK

-

II, LL, __

or

^^

on (one of)

the handset(s) to stop ringing.

ZZOO

or

^^

.

Dial the number.

After a few seconds, the call duration
is displayed. The dialled number is
stored in the redial memory.

When you are finished with the
call,

ZZPP

.

If the handset is placed on the
base or charger during a call,
the call will be disconnected.
Alternatively, to make a call,
dial the number, then ZO or
^. This procedure allows you
to edit / confirm the number
before dialling.
If you misdial, Z .
If Î flashes and an alarm tone
sounds when you press O or
^ move closer to the base
unit and try your call again.

Setting the Receiver
Volume

During a phone call,

ZZ SS/ UU

to change the volume setting.

Have a Hands-Free Phone
Conversation (using Digital
Speakerphone)

Handsfree allows you to talk to your
caller without holding the handset
and allows other persons in the room
to listen to the conversation.

W

C/O

C/O

W

C/O

W

Using the Telephone

Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333 7

Caller ID Service

Caller ID is a service of your
Network provider and will only
operate if you have subscribed to
this feature.

After subscribing to Caller
ID, this phone will display
the caller’s information.
If your unit is connected to
a PBX or a telephone line that does
not support this service you will not
be able to use it.
Caller ID does not display caller
information while using the handset
for an intercom call. However, the
caller’s information will be stored to
the Caller ID List.

Redialling

Redialling the Last Number
Dialled

ZZOO

or

^^

.

ZZXX

.

The last number dialled displays and
is dialled.

Making a Call from the
Redial List

The last 10 numbers dialled are
stored.

From the standby mode

ZZXX

.

ZZSS/UU

to select number.

(To exit the redial list, ZP).
ZZOO

or

^^

.

Auto Redial

If you press ^ then X for redial
call and the dialled number is busy,
the unit will automatically call back
every 40 seconds, up to 12 times.

Making a Call from the
Caller ID List

The last 50 caller’s phone numbers
are stored in the order the calls were
received. If the caller’s name has
been stored with the number in the
phonebook, (see ‘Storing Caller
Information into the Phonebook’), the
caller’s name will be displayed also.

From the standby mode

ZZSS/UU

.

The newest caller’s information is
displayed.

If there is no information stored
in the Caller ID list “No
Stored Memory” is displayed.

ZZSS/UU

to select number.

ZU to scroll to previous calls
and S to the most recent calls.

Only the most recent call from
the same caller is stored.

Only 16 digits of a phone
number are displayed. To
display the remaining digits of
longer phone numbers,

ZC.

On selection

ZZOO

or

^^

.

After you have viewed a phone
number, answered the call or called
back the caller, ‘✓’ is displayed.

After viewing all new Caller ID
information, the call counter is reset
to zero.

To exit the Caller ID list ZP.

JAMES ONODA
0123456789

17.08 14:59

ÎÏÔÍ Á Ò

Name
Tel No.

Date received

Time
received

W

C/O

Using the Telephone

8 Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333

Clear

(Clear a Number in the
List):

Follow steps 1 to 4.

ZZVV

.

“Clear?” is displayed.

ZZUU

to select ‘YES’.

ZZVV

.

“CLEARED” is displayed, a
confirmation tone sounds and the
next number is displayed. If you clear
the last number, “No Stored

Memory” is displayed.

All Clear

Caller ID List Menu /
Redial List Menu

Save Phonebook

(Save a Number from the
List into the Phonebook):

Follow steps 1 to 4.

ZZVV

.

“<Enter Name>” is displayed.

Enter Name if required. (See
page 10).

ZZUU

.

ZZYY

.

ZZSS/ UU

to select
Private Category 1-9 or
OFF.

ZZVV

.

ZZVV

to save.

You can save numbers from the redial
list/Caller ID list into the Phonebook,
edit or clear from memory.

From the standby mode

ZZXX

(to access Redial list) or

ZZSS

/

UU

(to access Caller ID list).

ZZSS/ UU

to select number from
list.

ZZVV

.

ZZSS/ UU

to select a menu item
then follow the instructions
below.

To exit the menu at any time,

ZZPP

.

4

3

2

1

Edit for Call

(Edit a Number in the List):

Follow steps 1 to 4.

ZZVV

.

ZZTT/ VV

to move the edit point.

Digits are added or deleted to the left
of the cursor.

To add digits

ZZKK-II

.

To clear digits

ZZ ..

Either

ZZOO

or

^^

to dial or to

save the number,

ZZYY

.

ZZYY

to select “Save Phonebook”.

ZZUU

.

ZZYY

.

ZZSS/ UU

to select
Private Category 1-9 or
OFF.

ZZVV

.

ZZVV

to save.

(Clear all Numbers in the
List):

Follow steps 1 to 4.

ZZVV

.

“All Clear?” is displayed.

ZZUU

to select YES.

ZZVV

.

A confirmation tone sounds and
“CLEARED”, then “No Stored
Memory” is displayed.

The handset returns to the standby
mode.

Using the Phonebook

Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333 9

Using the Phonebook

You can store up to 200 phone numbers and names in the phonebook. You can
enter up to 24 digits and up to 16 characters.

On entering names / numbers in the phonebook, you can assign 9 numbers from the
phonebook as Hot Key dials. The phonebook items are assigned to buttons A -
I on the keypad (see ‘Storing Phonebook Items as Hot Key Dials’). When the
numbers are assigned you can select the number by pressing the button it has been
assigned to (see ‘Dialling a Hot Key Number’).

Private Category Feature

You can categorise caller information in the phonebook. There are 9
categories available. For example, category 1 can be used to save all
friends numbers. For each category, you can select one of 3 backlight
colours and one of 20 ringer types (see ‘Handset Settings’). The

private category feature is only available after subscription to
Caller ID. Please contact your network provider for further information.

Example:

Storing Caller Information into the Phonebook

ZZVV

.

ZZSS/ UU

to select “New

Phonebook”.

ZZVV

.

The display shows the number
of phonebook spaces available.

If “Memory Full” is displayed,
the phonebook is full. To store,
clear other stored items in the
phonebook. (See ‘Clearing an
Item from the Phonebook’).

* Enter a name (up to 16
characters). (See ‘To enter Names /

Characters in the Phonebook’).

Name confirmed,

ZZUU

.

Enter phone number (up to 24
digits).

If a pause is required for
dialling, ZX. One pause
counts as one digit.

Number confirmed,

ZZYY

.

ZZSS/ UU

to select Private

Category number (1-9) or “OFF”.

ZZVV

.

ZZVV

to select “Save”.

A beep sounds and “Saved” is
displayed.

To exit the menu at any time,
ZP.

See ‘Phonebook Character
Table’ (page 40) for full list
of characters / symbols.

Private
Category

13

Display Backlight Colour

Green Red

Orange

Ringer Type

K

to

I

_

K

A

Using the Phonebook

10 Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333

To change the Character
Mode

You can select one of 6 character
modes by pressing

ÁÁ

during
entering a name. The factory preset is
“ABC”.

ZZVV

.

ZZSS/ UU

to select “New

Phonebook”.

ZZVV

.

ZZÁÁ

while entering a name.

ZZSS/ UU

to select the required

character mode.

ZZVV

to confirm selection.

For the full character map, see
‘Phonebook Character Table (page 40)’.

To enter Names/Characters
in the Phonebook

To enter the same letter twice,
enter the first and then ZV
to move the cursor on one space
to enter the next letter.

Example

Enter the name using the letters on
the keypad. For example, to enter
Anne:

ZZBB

.

ZZVV

.

ZZ__

.

(When _ is pressed, it changes
between upper and lower case).

ZZFF

twice.

ZZVV

.

ZZFF

twice.

ZZCC

twice.

Finding Items in the
Phonebook

All phonebook items are stored in the
following order: Alphabet
letter/Symbol/Number/Telephone

Number (when a name is not stored).

ZZÁÁ

to enter the phonebook.

ZZSS/ UU

until desired name is

displayed.

To Search for a Name by
Initial

ZZÁÁ

to enter the phonebook.

Press the dialling button for the
first letter of the desired name
until any name with the same
initial is displayed.

Eg. To find ‘Felix’, ZC
repeatedly until the first item
under ‘F’ is displayed.

ZZUU

until the desired name is

displayed.

Press to move the cursor.

-Press to enter letters /
numbers. (Items are added
to the left of the cursor. If
the cursor is at the
beginning of a line, the item
is added over the cursor).

-Press to delete characters.
(Characters are deleted to
the left of the cursor. If the
cursor is at the beginning of
a line, the first character
will be deleted).

-Press and hold to delete all
characters.

-Press to change between
upper and lower case.

-Press to insert a blank
space (except Numeric 0-9).

-Press to insert symbol
(eg. . , / ).

Note

C/O

W

Using the Phonebook

Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333 11

Dialling from the
Phonebook

ZZÁÁ

.

ZZSS/ UU

until desired name is

displayed. (You can also search for

an item by initial).

To exit the phonebook, ZP.

ZZOO

or

^^

.

When you are finished with the
call,

ZZPP

or place the handset

on the base unit.

Editing an Item in the
Phonebook

ZZÁÁ

.

ZZSS/ UU

to scroll to entry you

want. (You can also search for a

name by initial).

ZZVV

.

ZZVV

to select “Edit”.

Then follow from * in ‘Storing
Caller Information into the
Phonebook’.

Clearing an Item from
the Phonebook

ZZÁÁ

.

ZZSS/ UU

to scroll to entry you

want.

ZZVV

.

ZZUU

to select “Clear”.

ZZVV

.

ZZUU

to select “YES”.

ZZVV

.

A confirmation tone sounds and
“CLEARED” is displayed.

If the phonebook item is
registered as a ‘Hot Key Dial’,
Hot Key Dial is displayed as the
phonebook item is cleared.

The next item is displayed.

Hot Key Dialling

Storing Phonebook items
as Hot Key Dials

You can assign the dialling buttons
A to I as hot keys. You can
choose 9 phonebook items as Hot Key
Dials.

ZZÁÁ

.

ZZSS/ UU

to scroll to phonebook
item you want to register as a hot
key.

ZZVV

.

ZZUU

to select “Reg. To Hot

Key”.

ZZVV

.

ZZSS/ UU

to select the hot key to
register your item.

If an item is already stored to a
Hot Key, ‘✓’ will be displayed on

the left of the key number.

ZZVV

.

ZZVV

to select “Save”.
OR
If a hot key number with ‘✓’ is

selected,

ZZVV

to select

“Overwrite”.

A confirmation tone sounds.

Dialling a Hot Key Number

ZZ

and hold a key

AA

to

II

.

The number stored with that key is
displayed.

ZZSS/ UU

if you want to view

other stored items.

ZZOO

or

^^

.

When you are finished with the
call,

ZZPP

or place the handset

on the base unit.

Clearing a Phonebook Item
from a Hot Key

ZZ

and hold a key

AA

to

II

.

The number stored with that key is
displayed.

W

C/O

Using the Phonebook

12 Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333

Phonebook Copy

You can copy phonebook information
between handsets registered to the
same base unit. The phonebook copy
must be operated in intercom mode
(see ‘Intercom Between Handsets’ in
‘For Optional Multi-Unit Users’).

To Copy a Selected Item in
the Phonebook

For example, Handset 2 is
copying an item from its
phonebook to Handset 1.

Handset 1 (Receiver):

During an intercom call with
handset 2,

ZZYY

.

ZZUU

to select “Recv Phonebook”.

ZZVV

.

“Copy Proceeding” is
displayed.

If “Memory Full” is displayed,
the receiver handset memory is
full.

Handset 2 (Sender):

During an intercom call with
handset 1,

ZZYY

.

ZZVV

to select “Send Phonebook”.

The phonebook is displayed.

ZZSS/ UU

to scroll to phonebook

item you want to copy.

On selection,

ZZVV

.

ZZVV

to select “Copy Entry”.

“Copy Proceeding” is displayed
during copying.

ZZVV

.

ZZVV

to select “Clear”.

ZZUU

to select “YES”.

ZZVV

.

A confirmation tone sounds and
“CLEARED” is displayed.

To exit the menu at any time,
ZP.

When copying is complete, a beep
sounds and “Copy
Complete” is displayed. After a few
seconds, the display will return to
the intercom call.

“Copy Incomplete” will display if
the link is disconnected or if the
receiver handset memory is full.

If “Copy Failure” is displayed, the
receiver and/or sender did not
prepare for copying within 60
seconds.

To Copy All Items in the
Phonebook

For example, Handset 2 is
copying all its phonebook items
to Handset 1.

Handset 1 (Receiver):

During an intercom call with
handset 2,

ZZYY

.

ZZUU

to select “Recv Phonebook”.

ZZVV

.

“Copy Proceeding” is displayed.
If “Memory Full” is displayed, the

receiver handset memory is full.

Handset 2 (Sender):

During an intercom call with
handset 1,

ZZYY

.

ZZVV

to select “Send Phonebook”.

The first phonebook item is
displayed.

ZZVV

.

ZZUU

to select “Copy Forward”.

ZZVV

.

“Copy Proceeding” is displayed
during copying.

For further notes, see notes at the
end of ‘To Copy a Selected Item in
the Phonebook’.

To cancel copying at any time,
Z to return to the intercom
call or ZP to return to the
standby mode.

SMS Feature - Outgoing

Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333 13

SMS Feature - (Text Messaging)

You can send and receive text
messages between other fixed lines
and mobile phones that also support
a compatible SMS feature and
network, both national and
international.

The SMS feature is only
available after
subscription to Caller
ID.

Before sending your first text
message and to find out more
information on SMS conditions
and registration, please read
your ‘SMS Manual’.

If you have any questions
relating to SMS Service Help,
please call 09063020069 (calls are
charged at 50p per minute and
the helpdesk is open from

9.00am-5.30pm (Mon-Fri).

Please note the following
instructions when sending text
messages between fixed lines
and all mobile networks both
national and international.

To Send a Text Message
from Fixed Line to Fixed
Line

There are no special requirements
when sending a text message between
fixed lines. Please follow the
instructions under ‘Writing and
Sending New Messages’ on page 14.

To Send a Text Message
from Fixed Line to Mobile

There are no special requirements
when sending a text message between

fixed line and mobile. Please follow

the instructions under ‘Writing and
Sending New Messages’ on page 14.

To enable the person receiving your
message to reply, the server will
insert your telephone number, within
hash symbols, at the very end of your
message. Eg. #01234 567899#.
Please note: If you have used up the
full 160 characters for your text
message, your telephone number will
overwrite the last letters of your
message.

To Send a Text Message
from Mobile to Fixed Line

There are special requirements
when sending a text message from a
mobile to a fixed line. If the mobile
sender is unaware of the fixed line
SMS providers requirements for
sending a text message to a fixed line,
please inform them of the following
procedures.

Example - A Mobile is Replying
to a Fixed Line Text Message

Select reply to message.
Input your text message.
Within the text message, enter

the fixed line phone number. The

number can be added anywhere
within the message but it must be
entered with a hash at the beginning
and end of the number.

Eg. #01234 567899#

Select send.

Example - Mobile is Writing /
Sending a New Text Message to
a Fixed Line

Input your text message.
Within the text message, enter

the fixed line phone number. The

number can be added anywhere
within the message but it must be
entered with a hash at the beginning
and end of the number.

Eg. #01234 567899#

Send the message (including
number) to ‘Big Mobile’ on: 07786

201010.

SMS Feature - Outgoing

14 Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333

Writing and Sending New
Messages

The display returns to the
standby mode, then
“Transferring Message” is
displayed.

If the base unit does not have
sufficient memory to send a
message, the display will show

“SMS Lists are full.
Please clear Messages”.

The unit will then return to the
standby mode.
If the base unit can store one
more message “Use last
text?” is displayed. You
can choose whether to use the
last message or not. If you want
to use the last message, ZS
to recall the last message.

If you try to send a message
using a number over 20 digits
from one of the lists, “Invalid
Number” is displayed and
display returns to “Enter

Phone No”.

The maximum message length
is 160 characters.

You can write and send a new
message. Each message can contain
up to 160 characters.

ZZVV

.

ZZVV

to select “SMS Messages”.

ZZSS/ UU

to select “Create”.

ZZVV

.

Enter message.

You can change the input mode.
See ‘Text Entry’ for details.

On completion,

ZZYY

.

“Destination” and “Enter Phone
No” is displayed.

Enter phone number.

You can enter a phone number
manually, from the phonebook, Caller
ID or redial lists.

To enter a number manually,
press the buttons K - I
to enter the number. Then
follow from **.

To enter a number from the
phonebook, ZÁ, ZS / U
to select number. ZY. (You
can also search for a name by
initial, see page 10).
Then follow from **.

To enter a number from the
Caller ID list ZS / U, then

ZS / U to select number.
ZY. Then follow from **.

To enter a number from the
redial list, ZX, ZS / U
to select number. ZY. Then
follow from **.

**

ZZYY

.

“Save?” is displayed.

***

ZZSS/ UU

to select “YES”.

ZZVV

.

“Saved Message” is displayed, then
“Send”.

ZZVV

to select “Send”.

“Sending Message” is displayed.