Panasonic SP28P, KXF-1F4C Operating Instructions And Installation Manual
Operating Instructions
Model No.
KXF-1F4C
Thank you for purchasing SP28P, the high speed screen printer.
Before placing the machine in service, be sure to read the instruction manual for
proper usage.
After that, store it carefully and it if necessary.
1F4C-E-IMAB-0007
High speed Screen Printer SP28P
Installation Manual
Page 1
“Use of this machine:
This machine is designed and constructed to be used for placing
electric and electronic components on PCB.
This machine shall be used for this purpose only.
It shall not be used for any other purpose.”
“Operation of this machine:
This machine shall be operated by professional, specially trained operators.
It shall not be operated by non-professional, not specially trained operators.
Regarding the training course, please contact Panasonic Factory Solutions Co., Ltd. or PFSE.”
Machine was manufactured by: Panasonic Factory Solutions Co., Ltd.
441-13, Nagahasu, Tateishi-machi, Tosu-city, Saga, Japan
TEL:81-942-84-2644
FAX:81-942-84-2636
For Service and Supply of Spares in Europe
you may contact Panasonic Europe:
Continental Europe
PFSE
Panasonic Factory Solutions Europe
Winsbergring 15
22525 Hamburg Germany
Phone number :0049-(0)40-85386-321
Fax number : 0049-(0)40-85386-332
United Kingdom
PFSE
Panasonic Factory Solutions Europe
Panasonic House, Willoughby Road
Bracknell, Berks. RG12 8 FP
Phone number : 0044-(0)1344-853267
Fax number : 0044-(0)1344-425970
Year: 2005
1F4C-E-IMA00-B01-03
M11E
DO NOT ALLOW ANY PERSON WHO HAS NOT RECEIVED SPECIAL TRAINING
TO OPERATE THE MACHINE.
The machine may be operated improperly and injure you.
Either carry out training by yourself, or consult the manufacturer.
WARNING
Page 2
SPECIFICATIONS
1F4C-E-IMA00-B01-00
1F4C-801TE
metI noitacificepS
emittcatgnitnirPnoitomgnitnirp+s6
ezisdraobgnitnirP mm0.4otmm5.0:ssenkcihT,mm05xmm05:.niM,mm063xmm064:.xaM
emarfksaM mm055xmm006,mm055xmm056,mm637xmm637
epyteegeeuqS
drowS,eegeeuqserauqS,)dradnatS(eegeeuqsgnitnirpdeeps-hgiH
talF,eegeeuqscillateM,eegeeuqscillatemgnitnirpdeeps-hgiH,eegeeuqs
)noitpO(eegeeuqs
htgneleegeeuqS)dradnatS(mm084=L
deepseegeeuqSs/mm052ots/mm01
erusserpeegeeuqS
01x5:eegeeuqsgnitnirpdeeps-hgiH
2-
01x04otN
2-
adnemmocereW(N
01x01foerusserpgnitnirp
2-
01x51otN
2-
01x01wolebsgnitteS.N
2-
yamN
01x51:eegeeuqscillateM().ylbatstnirpton
2-
01x02otN
2-
).N
noitomeegeeuqS
noitcnufaivelbaegnahcsiedomeegeeuqselbuoddnaeegeeuqselgniS
.hctiws
ecnerefergninoitisopdraoB ).sutlusnoC.deriuqersitnemtsujdalellarapeegeeuqS(ecafdnednaretneC
dohtemgnixifdraoB )noitpo(dohtemnoitcusdraoB,)dradnatS(dohtemgnipmalclacinahceM
noisicerpgninoitisopemarfksaM ± ,noitceridY-Xnimm5 ± 5.1 ° noitceridgnitatorni
ecnaraelCmm3+otmm5.0-
noitareleccayticolevesaeler-ksaM
/lortnocyticolev-mrofinu/lortnoc
deeps-hgih/lortnocelpitlum
lortnocnoitarelecca
s/mm1.0/s/mm5ots/mm1.0yticolevlanimret,s/mm50.0yticolevlaitinI
s/mm01ots/mm1.0/s/mm5ots/mm1.0/s/mm5ot
noitcnufgninaelcediskcabksaM)gnitanretlA(tewroyrD
emittcatgninaelcksaM
deepsgninaelcdnaezisdraobnognidneped,dradnatsnis62
]elcyc1yrD[
ezisrepapgninaelC mm084htdiWm81htgneL)mm83retemaiDedisnI(hcni-5.1
ecivednoitcusmuucaV )noitpO(pmupmuucaV,)dradnatS(rewolB
snoisnemidretuO
htdiW)royevnocfoecafdnE(mm0581
htpeDmm0771
thgieH
mm0341
)rotacidnisutatsehtgnidulcnI(mm0002
ssaM )snoitpotuohtiW:noitarugifnocdradnatS(gk0551
erusserpriA 03ytitnauqylppuSaPM87.0otaPM94.0 nim/l
ylppusrewoP
egatlovlamroN
AVk1.3esahp-eerhT,zH06/05,V004CA
)AVk1.8:dellatsnItinUlortnoCerutarepmeT(
elbatpecca.xaM
noitautculf
± %5
egatlovtupnIV044/V004/V083
snoitidnoC
01:erutarepmeT ° 53otC °C
gnisnednocnon%08ot%53:ytidimuH
esioN
47 Bd
Page 3
This manual is for the operators and engineers of this equipment and
for the engineers who program the production data. It describes
machine operation on the whole, setting of production materials,
machine adjustment, production data creation and so on.
ORGANIZATION OF MANUALS
4 manuals are attached to this machine. They are classified into 4 types. Use each manual according
to the working purpose and person in charge.
The production data of the line including this machine are programmed on PT. Refer to the instruction
manuals accompanied with PT.
Operating manual
Manuals of this equipment
This manual is for the persons who maintain this equipment. It describes simple inspection/adjustment and replacement of consumable
parts.
Troubleshooting is also described.
Maintenance manual
The assembly of each unit is individually indicated by the exploded
views of parts. Use this list when ordering parts or confirming the
assembly of parts.
Parts List
This manual is for the installation of this equipment.
Installation manual
This
manual
1F4C-E-IMA00-B01-00
Page 4
1F4C-E-IMA00-B01-00
= MEMO =
Page 5
1
Installation Manua
Installation Manua
l
l
1F4C-E-IMA00-A02-03
SAFETY PRECAUTIONS
INSTALLATION
Page 6
1F4C-E-IMA00-A02-01
SAFETY PRECAUTIONS.................................................................. 7
Chapter
1 INSTALLATION
1-1 Preparations for Installation........................................................................ 1-2
1-1-1 Selection of Location...........................................................................................1-2
1-1-2 Power Source and Air Source .............................................................................1-3
1-1-3 Foundation ..........................................................................................................1-5
1-1-4 Transfer ...............................................................................................................1-5
1-1-5 Arrangement Diagram.........................................................................................1-5
1-1-6 Setting the Line Connection Cable and the Relay Board....................................1-6
1-2 Installing Procedure.................................................................................. 1-10
1-3 Installing Procedure of Surrounding Equipment....................................... 1-13
1-3-1 Installing the Warning Indicator .........................................................................1-13
1-3-2 Installing the blower ..........................................................................................1-14
1-3-3 Installing the Atmosphere Temperature Controller (Option) ..............................1-15
Page 7
SAFETY PRECAUTIONS
Be sure to observe
The precautions that must be observed in order to prevent injury to the user or another
person, or damage to property, are as follows.
The degrees of danger or injury resulting from incorrect usage owing to the failure to read
an indication, are described as follows.
The matters should be observed are classified and described according to the symbols
shown below.
(The followings are only some examples of the symbolic indications.)
This indication refers to a situation which is considered that
there is a possibility of death or serious injury.
1F4C-E-IMA00-A03-01
WARNING
These symbols indicate an action that must be carried out.
These symbols indicate an action that must not be carried out.
Loading...