These instructions contain information on operating the scanner. Before reading these instructions, please read
the Quick Installation Guide enclosed with this unit.
Keep all documentation in a safe place for future reference.
Current model availability depends on your country/area. Please contact your dealer.
Introduction
Introduction
Thank you for purchasing a Panasonic Document Scanner.
•Scanning speeds based on scanning using A4 size paper, 200 / 300 dpi and monochrome / color.
2Operating Manual
Introduction
High-speed Double Sided Scanning
•This scanner can scan documents at high speed, regardless of the image type (monochrome / color).
Background Color Switch Function
•Using the software, you can switch the background color of scanned images between white and black.
Double Feed Detection Function
•This scanner contains an ultrasonic sensor for the detection of double feeding. Double feeding can be
detected even if you scan documents that contain paper of various thicknesses.
Double Feed Skip (DFS) Function
•If scanning has been stopped because a double feed was detected, you can easily resume scanning by
pressing the Skip button. When you scan documents that include items that you do not want to be detected
as double feeding (for example, documents that have receipts attached, envelopes, etc.), the double feed
detection function can be enabled and still scan these documents.
Push Scan
•This scanner has a push scan function for starting scanning without operation through a computer.
Scanning is started by selecting from settings that have been registered in advance with the cursor button,
and then pressing the scanner’s OK button*1 or Start/Stop button*2. This scanner also has a function that
starts scanning when you place documents on the feed tray (Touch Free Scanning).
*1
KV-S1057C and KV-S1027C
*2
KV-SL1066, KV-SL1056, KV-SL1055, KV-SL1036 and KV-SL1035
Card Scanning
•A maximum of 3 cards can be loaded on the feed tray.
Mixed Batch Card Guide
•A mixed batch card guide is available for scanning mixed media (cards and papers) at the same time.
Manual Feed Selector
•Bound documents can be scanned by setting the manual feed selector to manual scanning (Manual).
Other Features
•The paper feed path can be opened widely to easily remove jammed paper and perform maintenance.
•This scanner has a counter function which indicates the approximate time for cleaning and replacement
of the rollers. The counters can be configured and checked in User Utility.
Operating Manual3
Introduction
Abbreviations
•Windows
•Windows
•Windows Vista
•The explanations and screen shots in this manual are based on the Windows 7 operating system.
•The screen shots used in this manual may differ from the screens displayed on your computer.
•The illustrations in this manual are based on the KV-S1057C.
®
refers to the Microsoft® Windows® operating system (hereafter Windows).
®
XP refers to the Microsoft® Windows® XP operating system (hereafter Windows XP).
®
refers to the Microsoft® Windows Vista® operating system (hereafter Windows Vista).
Trademarks
•Microsoft, Windows, Windows Vista, and Internet Explorer are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries.
•ISIS is a registered trademark or trademark of EMC Corporation in the United States and/or other countries.
•IBM is a trademark of International Business Machines Corporation, registered in many jurisdictions
worldwide.
•Intel and Intel Core are trademarks of Intel Corporation in the U.S. and/or other countries.
•Adobe and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated
in the United States and/or other countries.
•All other trademarks identified herein are the property of their respective owners.
4Operating Manual
About the Documentation
The scanner documentation consists of 2 manuals: the Operating Manual (this manual), and the Quick
Installation Guide.
Introduction
Operating Manual
(this manual)
Quick Installation Guide
This manual provides information about the operation of the unit.
The Quick Installation Guide explains about safety precautions and other
important information, and outlines brief installation procedures of the unit and
software.
About the Software Help
Each software contains help files.
For details about viewing the help files, see "To view the help" (page 22).
Software / Manual CD-ROM Contents
Device Driver
Drivers
ApplicationsImage Capture Plus
Utilities
TWAIN
ISIS
User Utility
Scan Button Setting Tool—
—
—
—
Panasonic proprietary application
for configuring advanced
scanning settings
—
Documents
Operating Manual
Control sheet
This manual
See "Using Control Sheets"
(page 46).
Operating Manual5
Introduction
System Requirements
ComputerIBM® PC/AT or compatible machine with a CD-ROM drive
CPUIntel® Core™ i5 2.5 GHz or higher
Memory4 GB or higher
InterfaceUSB 2.0 / USB 3.0
Note
•For details about the system requirements, refer to [Read me first] in the Software / Manual CD-ROM.
•The scanning speed differs depending on the host computer’s operating environment or the application
used.
•Due to the slower speed of USB 1.1, it is recommended to use a USB 2.0 / USB 3.0 interface.
•If you connect the unit to a USB hub, it is not guaranteed to work.
Optional Accessories
Part Name
Roller exchange kit
•Paper feed roller
Part NumberNotes
KV-SS061
•Double feed prevention roller module
Roller cleaning paperKV-SS03
Carrier sheetKV-SS076
Note
•To purchase separately sold items, contact your dealer.
See "Replacing the Rollers"
(page 60).
See "Roller Cleaning Paper"
(page 10).
See "Compatible Bound
Documents (Manual Scanning
Only)" (page 26).
6Operating Manual
Table of Contents
Before You Start .......................................................................................9
It is unlawful to make duplication of certain
documents.
Duplicating certain documents may be illegal in
your country/area.
Penalties of fines and/or imprisonment may be
imposed on those found guilty. The following are
examples of items that may be illegal to duplicate
in your country/area.
•Currency
•Bank notes and checks
•Bank and government bonds, and securities
•Passports, licenses, official or private
documents, identification cards, and the like
•Copyright materials, or trademarks without
the consent of the owner
•Postage stamps, and other negotiable
instruments
This list is not inclusive, and no liability is
assumed for either its completeness or accuracy.
In case of doubt, contact your legal counsel.
Notice
Install your machine near a supervised area
to prevent illegal duplication from being
made.
Installation
•Do not place the unit in direct sunlight, in a cold
draft, or near heating apparatus.
•Do not place the unit near apparatus which
generate electronic or magnetic noise.
•Protect the unit from static electricity.
•Do not move the unit immediately from a cold place
to a warm place. It may cause dew.
•When the unit is not used over an extended period
of time, turn the unit off, and unplug the power cord.
The unit consumes approximately 0.5 W of
electricity even when the main unit is turned off.
•Use only the power cord and the USB cable that are
provided with the unit.
•Do not turn ON the unit’s power before installing the
software.
CD-ROM
•Do not write or stick paper on the front and/or back
of CD-ROM.
•Do not touch the data side of the CD-ROM. When
handling the CD-ROM, be careful not to leave
fingerprints or otherwise damage the CD-ROM.
•Do not leave the CD-ROM where it is directly
exposed to sunlight or near a heater for extended
periods.
•Do not throw or bend the CD-ROM.
Operating Manual9
1
Before You Start
Roller Cleaning Paper
Using a pair of scissors, open the bag along the dotted
line (A), and take out the roller cleaning paper.
If the bag is left opened for a long period of time before
using it, the alcohol will evaporate. Please use the roller
cleaning paper immediately after opening the bag.
Notice
•Keep the roller cleaning paper out of reach of
small children.
•Do not store the roller cleaning paper in direct
sunlight or in a place with a temperature over
40 °C (104 °F).
•Only use the roller cleaning paper to clean the
rollers.
•For details about the roller cleaning paper, refer
to the Material Safety Data Sheet (MSDS).
Please ask your Panasonic sales company
about obtaining the Material Safety Data Sheet.
•To purchase the roller cleaning paper
(KV-SS03), please contact your dealer, or call
our Supplies and Accessories department at
1-800-726-2797 (U.S.A. only).
Security Notice
The management of documents and scanned data is
the responsibility of the user. In particular, pay attention
to the following points.
•Make sure you have the same number of pages for
important documents both before and after
scanning, and take care not to leave any pages in
the scanner.
•Periodically back up important data.
•When having your computer or hard disk serviced,
or when disposing of your computer or hard disk,
completely erase any stored image data.
Others
•Make sure to remove paper clips and staples from
documents before scanning. Failing to do so can
damage the unit, document, or both.
•Do not use thinner, benzine, or cleaners containing
abrasives or surfactants, for cleaning the outside of
scanner.
KEEP AWAY FROM FIRE.
10Operating Manual
Before You Start
Check the Accessories
Check that all accessories are included before installing the unit. In the event that an item is missing, please
contact your dealer.
AccessoriesNameNotes
USB cable—
Software /
Manual CD-ROM
Mixed batch card guide
Quick Installation Guide—
Power cord
Note
Drivers, Applications, Utilities, Documents
When the unit is shipped, this is stored in the
feed tray.
Two power cords may be included. Use the
power cord appropriate for where you use the
unit.
•It is highly recommended to keep the original carton and all packing materials. They are necessary
Switches the scanning method between continuous scanning (Auto) and manual scanning (Manual).
Operation panel
For details, refer to "Operation Panel and LED Indicators" (page 14).
Exit tray
Exit extension tray 1
Exit extension tray 2
Exit stopper
Exit guides
Fan exhaust vent
ADF door
ADF door release
Feed tray
Feed extension tray
12Operating Manual
Rear
12
3
4
5
Location of Controls
Security slot
Use a commercially available security cable.
USB connector
USB cable
Connect the USB cable to the scanner and the other end of the USB cable to the computer.
Power cord
AC inlet
Operating Manual13
123456
78
123546
9
Location of Controls
Operation Panel and LED Indicators
nKV-S1057C and KV-S1027C
nKV-SL1066, KV-SL1056, KV-SL1055, KV-SL1036 and KV-SL1035
A LED (Red)
Lights when an error occurs.
B LED (Green)
Shows the scanner’s status.
C Power button
Press the power button for more than one second to turn the unit off.
D Cursor button
E Skip button
If you press this button after a double feed is detected and scanning has been paused, the document
(or documents) detected as a double feed will be scanned, and then ejected from the scanner.
14Operating Manual
Scanning will continue after the document is scanned and ejected.
Location of Controls
F Start/Stop button
•If you set [Wait Key] for "Manual Feed Mode" in your application software, pushing this button
starts scanning. For details about "Manual Feed Mode", refer to the Image Capture Plus,
TWAIN, or ISIS help.
•During scanning, pushing this button stops scanning.
•If you press this button after a double feed is detected and scanning has been paused, the
document (or documents) detected as a double feed will be ejected from the scanner without
being scanned. Scanning will stop.
n KV-S1057C and KV-S1027C only
G LCD
H OK button
If you are using the scanner with Image Capture Plus, you can perform a push scan using the LCD.
Registered jobs are displayed on the LCD. Use the cursor button (D) to select a job. Also, error
codes and messages corresponding to the scanner status are displayed on the LCD.
n KV-SL1066, KV-SL1056, KV-SL1055, KV-SL1036 and KV-SL1035 only
I 7-segment LED
If you are using the scanner with Image Capture Plus, you can perform a push scan using the
7-segment LED. A registered job number is displayed on the 7-segment LED. Use the cursor button
(D) to select a job.
Operating Manual15
Location of Controls
About LED
The status of the scanner is displayed by the LED (Red) (A) and the LED (Green) (B), as shown in the
table below:
A LED (Red)B LED (Green)Status
OFFOFFPower OFF
*1
OFFONReady mode or Scanning
OFFBlinking (Slow, Long ON)Sleep mode
Blinking (Slow)
ONOFFError
ONWarning
*3
*2
OFFBlinking (Fast)Warming up
OFFBlinking (Fast, 2 times consecutively)Double Feed Skip mode
*1
If the power off feature in sleep mode is enabled, and if no operation is performed for a certain period of time, the scanner will be
turned off automatically. Press the power button of the scanner to turn it on. You can enable/disable the power off feature, and change
the time until the scanner turns off in User Utility.
*2
If no operation is performed for 15 minutes or longer, the scanner will enter sleep mode automatically to conserve energy. Press any
button (except the power button) on the scanner’s operation panel to return to ready mode. The time until the scanner enters sleep
mode can be changed in User Utility.
*3
For details about the error, refer to "Error Messages (KV-S1057C and KV-S1027C only)" (page 69) or check in User Utility.
16Operating Manual
272 mm
(10.7 in.)
300 mm
(11.8 in.)
500 mm
(20 in.)
750 mm
(30 in.)
238 mm
(9.4 in.)
400 mm
(16 in.)
I
Installation
n
s
t
a
l
l
a
t
i
o
n
Required Space Around the Scanner
In order to ensure proper operation, install the unit maintaining the proper distances from surrounding objects,
as shown in the following illustration.
Notice
•Do not move the unit immediately from a cold place to a warm place. It may cause condensation, which
may damage the unit.
Operating Manual17
Installation
Installing the Software
Notice
•Make sure to connect the unit to your computer after installing the software. Connecting the unit to your
computer and turning on the unit’s power before installing the software may influence the software
installation. If you connect the unit to your computer and turn on the unit’s power before installing the
software by mistake, install the software after disconnecting the unit from your computer.
•Make sure to log on as an administrator to install the software.
The software on the enclosed Software / Manual CD-ROM can be installed on your computer.
You can select from the 2 installation methods below, depending on your needs.
a. Complete: Install all the drivers, applications, utilities and Operating Manual.
b. Custom: Install one of the software or Operating Manual.
Note
•Normally, it is recommended to select [Complete].
1. Check that the unit has been turned off.
•If the power is turned on, press and hold the power button for more than one second to turn the unit
off.
2. Insert the Software / Manual CD-ROM into the CD/DVD drive on your computer.
•If you have a feature called "Autorun" activated, the installation process will start automatically.
•The setup window will appear.
Note
•If the AutoPlay dialog box is displayed, select [CDRun.exe].
•If the setup window does not appear, double-click [CDRun.exe] in the Software / Manual CD-ROM.
3. Check the [Read me first] file.
4. Select the desired installation methods from "Software" on the left side of the screen.
•If you selected [Complete], continue to step 6.
If you selected [Custom], continue to step 5.
18Operating Manual
Installation
5. If you selected [Custom] for the installation type in step 4, select the item that you want to install.
Note
•If you select TWAIN or ISIS, Image Capture Plus will also be installed.
6. Follow the instructions on the screen and complete the installation.
•Restart your computer if you are prompted to do so.
Operating Manual19
Installation
Installing the Unit
1. Remove all packing tape and cushioning.
2. Pull out the feed extension tray in the direction of the arrow shown in the illustration below.
3. Set the exit tray.
a. Raise the exit stopper.
20Operating Manual
b. Pull out the exit tray (A) and the exit extension trays (B, C).
2
1
3
Notice
•Do not forcefully pull out the exit stopper, the exit tray, or the exit extension trays. Doing so
may damage them.
Installation
4. Plug in the power cord and connect the USB cable.
5. Press the power button to turn ON the unit’s power.
•The LED (Green) will flash and then turn on.
•If the hardware wizard appears, follow the on-screen instructions to complete installation.
Operating Manual21
Installation
Viewing Operating Manual and Help Installed
If the manuals and software that were included on the Software / Manual CD-ROM have been installed on your
computer, you can use the following procedure to view the Operating Manual and the software’s help.
•In Windows 8, select the [Panasonic Document Scanner] section on the Apps screen.
For TWAIN or ISIS
1. Click the help button on any driver screen.
22Operating Manual
Width
Length
O
p
e
r
a
t
i
o
n
Preparing Documents
Notice
•Make sure to remove paper clips and staples from documents before scanning. Failing to do so can
damage the unit, document, or both.
•It is recommended to confirm that documents and cards are suitable for scanning (paper size,
Operation
thickness, type, etc.) before scanning them.
•Before feeding, ensure that the document is not creased or folded. If the document is creased or folded,
a paper jam or damage to the document may occur.
•When scanning important documents, confirm that the number of scanned images matches the number
of pages in the feed tray. Also, check the condition of the scanned documents.
•Remove documents from the exit tray after they have been scanned.
Compatible Paper Types
Paper size:
The compatible paper sizes for this unit are as follows.
Width48 – 216 mm (1.9 – 8.5 in.)
Length
*1
Using "Long Paper", you can scan long documents by splitting them into smaller parts. For details about "Long Paper", refer to the
Image Capture Plus, TWAIN, or ISIS help.
Paper thickness:
0.04 – 0.5 mm (1.6 – 19.7 mils)
Note: 1 mil = 0.001 in.
When feeding one sheet: 54 mm – unlimited (2.1 in. – unlimited)
When feeding multiple sheets: 54 – 356 mm (2.1 – 14 in.)
*1
Paper weight:
20 – 413 g/m² (5 – 110 lb.)
Operating Manual23
Loading...
+ 52 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.