Panasonic K-NL404K/G, K-NL416K/G, K-NL408K/G Quick Start Manual
Network Video Recorder
Quick Start Guide
Model No. K-NL404K/G
K-NL408K/G
K-NL416K/G
Version 1.0.0
i
Table of Contents
1 Hardware Installation and Connection .......................................................................... 1
1.1 Preparation Work ................................................................................................... 1
1.2 HDD Installation ..................................................................................................... 1
2 Front Panel/Rear Panel ................................................................................................... 3
3 Connection ........................................................................................................................ 7
4 GUI Operation ................................................................................................................... 8
4.1 Boot up .................................................................................................................... 8
4.2 Device Initialization ................................................................................................ 8
4.3 Reset Password ................................................................................................... 11
4.4 Startup Wizard ...................................................................................................... 14
4.5 Registration ........................................................................................................... 14
4.6 Schedule ............................................................................................................... 17
4.7 Instant Playback ................................................................................................... 20
5 Web Operation ................................................................................................................ 22
5.1 Network Connection ............................................................................................ 22
5.2 Login ...................................................................................................................... 22
6 Note .................................................................................................................................. 26
ii
Icon
Note
DANGER
WARNING
Indicates a potentially hazardous situation, which if not avoided,
could result in device damage, data loss, performance
degradation, or unexpected results.
Anti-static
Eletric shock
risk
High power
laser radiation risk
Tips
It is intended to help you to fix a problem or save your time.
Note
Provides additional information to emphasize or supplement
important points of the main text.
Welcome
Thank you for purchasing our network video recorder!
This quick start guide is designed to be a reference tool for your system.
Keep it well for future reference.
Contact your local retailer ASAP if something is missing or damaged in the bag.
Safety Instruction
Indicates a hazard with a high level of risk, which if not avoided, will
result in death or serious injury.
Indicates it is the static sensitive device.
Indicates presence of dangerous high voltage. There is a risk of
electric shock to persons.
Indicates presence of high power laser radiation.
iii
Important Safeguards and Warnings
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes.
An apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a
protective earthing connection.
Use a power supply which meets the requirements for SELV (Safety Extra Low Voltage) and
complies with Limited Power Source according to IEC 60950-1. Refer to the device label for
detailed information.
The product must be grounded to reduce the risk of electric shock.
We assume no liability or responsibility for all the fires or electric shock caused by improper
handling or installation.
2．Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage
and installation.
3．Installation
Keep upwards. Handle with care.
Do not apply power to the NVR before completing installation.
Do not place objects on the NVR.
Do not install on the wall.
4．Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
5．Environment
The NVR should be installed in a cool, dry place away from direct sunlight, inflammable,
explosive substances and etc.
This series product shall be transported, storage and used in the specified environments.
Environment which needs to comply with the following conditions:
The function of the ITE being investigated to IEC 60950-1 is considered not likely to require
connection to an Ethernet network with outside plant routing, including campus environment.
The installation instructions clearly state that the ITE is to be connected only to PoE
networks without routing to the outside plant.
6. Accessories
Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.
7. Lithium battery
Improper battery use may result in fire, explosion, or personal injury!
When replace the battery, please make sure you are using the same model!
iv
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
1
1 Hardware Installation and Connection
1.1 Preparation Work
SN
Name
Contents
1
Whole
Appearance
There is any visible damage or not.
Package
There is any accidental clash during
transportation or not.
2
Front
The model on the front
panel
Check the model with the purchase
order.
The label on the rear
It is neat and clean or not.
Do not tear off, or discard the label.
Usually we need you to represent the
serial number when we provide the
service after sales.
3
Case
Appearance
There is any visible damage or not.
Check the data cable,
power cable, fan cable,
Check the connection is secure or not.
Contact your local retailer or our
service engineer if the connection is
loosen.
1.2 HDD Installation
DANGER
All the installation and operations here should conform to your local electric safety
rules.
package
panel and
rear
panel
panel.
Note
main board and etc.
Note
DANGER
Shut down the device and then unplug the power cable before you open the case to
replace the HDD!
All figures listed below for reference only!
For the first time to install, please check the HDD has been installed or not.
Refer to the user manual for HDD space information and recommended HDD brand. Please use HDD of
7200rpm or higher. Usually we do not recommend the PC HDD.
2
Connect to the HDD data cable to the main
port.
After connect the cable, put the front
①Use the screwdriver to loose the screws
of the rear panel and then remove the front
cover.
③
board and the HDD port respectively. Loosen
the power cable of the chassis and connect
another end of the power cable to the HDD
②Put the HDD to the HDD bracket in
the chassis and then line up the four
screws to the four holes in the HDD.
Use the screwdriver to fix the screws
firmly to secure HDD on the HDD
bracket
④
cover back to the device and then fix
screws of the rear panel.
3
2 Front Panel/Rear Panel
In text mode, input number 1/4 (English character G/H/I)
Note
Follow figures listed here for reference only. Please refer to the actual product for detailed information.
Refer to the user’s manual for detailed information.
The front panel is shown as in Figure 2-1.
K-NL404K/G, K-NL408K/G
K-NL416K/G
Figure 2-1
Please refer to the following sheet for front panel button information.
Name Icon Function
Power button
Shift Shift
Up/1
Down/4
Power button, press this button for three seconds to boot up
or shut down NVR.
In textbox, click this button to switch between numeral,
English(Small/Capitalized),donation and etc.
Activate current control, modify setup, and then move up and
down.
Increase/decrease numeral.
Assistant function such as PTZ menu.
Left/2
Right/3
Shift current activated control, move left and right.
When playback, click these buttons to control playback bar.
In text mode, input number 2(English character A/B/C)
/3(English character D/E/F)
4
window monitor mode, click this button to display
Backspace function: in numeral control or text control, press it
delete the previous character before the
cursor.
mode, click it to switch between numeral, English
Network error occurs or there is no network connection, the
Go to previous menu, or cancel current operation.
ESC ESC
When playback, click it to restore real-time monitor mode.
Confirm current operation
Enter ENTER
Record REC
Slow play/8
Assistant Fn
Fast play/7
Go to default button
Go to menu
Manually stop/start recording, working with direction keys
or numeral keys to select the recording channel.
Multiple slow play speeds or normal playback.
In text mode, input number 8 (English character T/U/V).
One-
assistant function: PTZ control and image color.
for 1.5 seconds to
In motion detection setup, working with Fn and direction keys
to realize setup.
In text
character(small/capitalized) and etc.
Realize other special functions.
Various fast speeds and normal playback.
In text mode, input number 7 (English character P/Q/R/S).
Play previous/0 |
Reverse/Pause/
6
Play Next/9 |
Play/Pause /5 ||
USB port
Network
abnormal
indication light
||
Net
In playback mode, playback the previous video
In text mode, input number 0.
In normal playback or pause mode, click this button to reverse
playback
In reverse playback, click this button to pause playback.
In text mode, input number 6 (English character M/N/O).
In playback mode, playback the next video
In menu setup, go to down ward of the dropdown list.
In text mode, input number 9 (English character W/X/Y/Z).
In normal playback click this button to pause playback
In pause mode, click this button to resume playback.
In text mode, input number 5(English character J/K/L).
To connect USB storage device, USB mouse.
light becomes red to alert you.
5
or not. It becomes on when system is
Remote control
indicator light
Status indicator
light
adaptive Ethernet port.
High Definition
High definition audio and video signal output port. It
transmits uncompressed high definition video and
the HDMI port of the display
HDD abnormal
indication light
Record light 1-16
IR Receiver IR It is to receive the signal from the remote control.
HDD
ACT Remote control indicator light.
STATUS The light is on if device operates properly.
HDD error occurs or HDD capacity is below specified
threshold value, the light becomes red to alert you.
System is recording
recording.
The rear panel is shown as in Figure 2-2.
K-NL404K/G
K-NL408K/G
K-NL416K/G
Figure 2-2
Please refer to the following sheet for detailed information.
Icon Port Name Function
10M/100M/1000Mbps selfConnect to the network cable.
multiple-channel data to
device. HDMI version is 1.4.
It displays Screen-1.
HDMI
Network port
Media Interface
Loading...