Panasonic K-NL304K/G, K-NL308K/G Quick Start Manual
Network Video Recorder
Quick Start Guide
Model No. K-NL304K/G
K-NL308K/G
Version 1.0.0
i
Table of Contents
1 HardwareInstallationandConnection ....................................................................1
1.1 CheckUnpackedNVR...................................................................................1
1.2 AboutFrontPanelandRearPanel ...............................................................1
1.3 AfterRemovetheChassis.............................................................................1
1.4 HDDInstallation .............................................................................................1
1.5 FrontPanel.....................................................................................................2
1.6 RearPanel......................................................................................................4
2 ConnectionSample..................................................................................................6
3 GUIOperation..........................................................................................................7
3.1 Login...............................................................................................................7
3.2 RemoteDevice...............................................................................................8
3.3 Schedule.........................................................................................................9
3.4 RealtimePlayback .......................................................................................12
4 WebOperation.......................................................................................................13
4.1 NetworkConnection.....................................................................................13
4.2 Login.............................................................................................................14
4.3 MainWindow................................................................................................15
4.3.1 LANLogin...........................................................................................15
4.3.2 WANLogin..........................................................................................15
ii
Welcome
Thank you for purchasing our network video recorder!
This quick start guide is designed to be a reference tool for your system.
.
iii
Important Safeguards and Warnings
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes.
The product must be grounded to reduce the risk of electric shock.
We assume no liability or responsibility for all the fires or electrical shock caused by improper
handling or installation.
2．Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.
3．Installation
Keep upwards. Handle with care.
Do not apply power to the NVR before completing installation.
Do not place objects on the NVR
4．Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
5．Environment
The NVR should be installed in a cool, dry place away from direct sunlight, inflammable,
explosive substances and etc.
This series product shall be transported, storage and used in the specified environments.
6. Accessories
Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
7. Lithium battery
Improper battery use may result in fire, explosion, or personal injury!
When replace the battery, please make sure you are using the same model!
Before your operation please read the following instructions carefully.
z Installation environment
Keep away from extreme hot places and sources
Avoid direct sunlight
Keep away from extreme humid places
Avoid violent vibration
Do not put other devices on the top of the NVR
Be installed in well ventilated place; do not block the vent.
1
1 HardwareInstallationandConnection
1. Loosen the screws of the
upper cover and side panel.
2. Fix four screws in the HDD
(Turn just three rounds).
3. Place the HDD in accordance with
the four holes in the bottom.
HDD2
HDD1
Note: All the installation and operations here should conform to your local
electric safety rules.
1.1 CheckUnpackedNVR
When you receive the NVR from the forwarding agent, please check whether there is any visible
damage. The protective materials used for the package of the NVR can protect most accidental
clashes during transportation. Then you can open the box to check the accessories.
Please check the items in accordance with the list (Remote control is optional). Finally you can
remove the protective film of the NVR.
1.2 AboutFrontPanel andRearPanel
For detailed information of the function keys in the front panel and the ports in the rear panel,
please refer to the User’s Manual included in the resource CD.
The model label in the front panel is very important; please check according to your purchase order.
The label in the rear panel is very important too. Usually we need you to represent the serial number
when we provide the service after sales.
1.3 AfterRemovetheChassis
Please check the data cable, power cable, COM cable and main boar cable connection is secure
or not.
1.4 HDDInstallation
Important
Please turn off the power before you replace the HDD.
The pictures listed below for reference only
You can refer to the User’s Manual for recommended HDD brand. Please use HDD of 7200rpm
or higher. Usually we do not recommend the PC HDD.
For detailed operation instruction, please refer to the User’s Manual included in the resources CD.
2
1.5 FrontPanel
Name
Icon
Function
Power button
Power button, press this button for three seconds to boot up
or shut down NVR.
Shift
Shift
In textbox, click this button to switch between numeral,
English(Small/Capitalized),donation and etc.
4. Turn the device upside down
and then turn the screws in
firmly.
5.Fix the HDD firmly.
6. Connect the HDD cable and
power cable.
Note: Be careful so that the
cables are not in contact with
the edge of the HDD.
7. Put the cover in accordance
with the clip and then place the
upper cover back.
8. Secure the screws in the rear
panel and the side panel.
For detailed operation instruction, please refer to the User’s Manual included in the resources CD.
The front panel is shown as in Figure 1-1.
Figure 1-1
Please refer to the following sheet for front panel button information.
Loading...