Basic Operating Instructions
Instrucciones básicas de funcionamiento
Wearable Camera
Cámara Portatil
Model No.
Please read these instructions carefully before using
this product, and save this manual for future use.
Lea cuidadosamente estas instrucciones antes de
usar este producto, y g uarde este manual para usa rlo
en el futuro.
More detailed operating instructions are available in “Operating Instructions (PDF format)”. To
read it, download it from the website.
https://eww.pavc.panasonic.co.jp/hdw/oi/A500/
≥ Click the desired language.
* You will need Adobe Reader to browse or print the Operating Instructions (PDF format).
You can download and install a version of Adobe Reader that you can use with your OS from
the following website. (As of April 2014)
http://www.adobe.com/products/acrobat/readstep2.html
Se pueden encontrar instrucciones de fu ncionamiento más detalladas en “Instrucciones de
funcionamiento (formato PDF)”. Para leerlo, descárguelo de la página web.
https://eww.pavc.panasonic.co.jp/hdw/oi/A500/
≥ Haga clic en el idioma deseado.
* Necesitará Adobe Reader para buscar o i mprimir las instrucciones de funcionamiento (formato PDF).
Se puede descargar e instalar una versión de Adobe Reader que puede usar con su sistema
operativo en la siguiente página web. (A partir de abril de 2014)
http://www.adobe.com/products/acrobat/readstep2.html
HX-A500
SQT0253
Information for Your Safety
WARNING:
To reduce the risk of fire, electric shock or
product damage,
≥ Do not let water or other liquids drip or
splash inside the un it.
≥ Do not expose accessories (battery pack,
battery charger, AC adaptor, SD memory
card and etc.) to rain, moisture, dripping or
splashing.
≥ Do not place objects filled with liquids,
such as vases, on accessories.
≥ Use only the recommended accessories.
≥ Do not remove covers.
≥ Do not repair this unit by yourself. Refer
servicing to qualified service personnel.
CAUTION!
To reduce the risk of fire, electric shock or
product damage,
≥ Do not install or place this unit in a
bookcase, built-in cabinet or in an other
confined space. Ensure this unit is well
ventilated.
≥ Do not obstruct this unit’s ventilation
openings with newspapers, tablecloths,
curtains, and similar items.
≥ Do not place sources of naked fla mes,
such as lighted candles, on this unit.
This unit is intended for use in moderate
climates.
∫ EMC Electric and magnetic
compatibility
This symbol (CE) is located on the rating plate.
Product Identification Marking is located on
the bottom of the unit.
∫ Cautions for use
This unit and the microSD card become
warm during use. This is not a
malfunction.
Keep this unit as far away as possi ble from
electromagnetic equipment (such as
microwave ovens, TVs, video games etc.).
≥ If you use this unit on top of or near a TV, the
pictures and/or sound on this unit may be
disrupted by electromagnetic wave radiation.
≥ Do not use this unit near cell phones because
doing so may result in noise adversely
affecting the pictures and/or sound.
≥ Recorded data may be damaged, or pictures
may be distorted, by strong magnetic fields
created by speakers or large motors.
≥ Electromagnetic wave radiation generated by
microprocessors may adversely affect this
unit, disturbing the pictures and/or sound.
≥ If this unit is adversely affected by
electromagnetic equipment and stops
functioning properly, press the reset button.
Do not use this unit near radio transmitters
or high-voltage lines.
≥ If you record near radio transmitters or
high-voltage lines, the recorded pictures and/
or sound may be adversely affected.
About connecting to a PC
≥ Do not use any other USB cables except the
supplied one.
≥ Make sure to use the supplied cable.
≥ Do not extend the cable.
≥ Do not spray insecticides or volatile
chemicals onto this unit.
≥ Do not leave rubber or plastic products in
contact with this unit for a long time.
≥ Before cleaning, pull the USB cable from the
PC, and then wipe this unit with a soft, dry
cloth.
≥ Use of benzine, paint thinner, alcohol, or
dishwashing liquid may alter the camera body
or peel the surface finish. Do not use the se
solvents.
≥ Store this unit in a cool place with minimal
humidity, and with a constant temperature
2
SQT0253 (ENG)
where possible (recommended temperature:
15 oC to 25 oC, recommended humidity:
40%RH to 60%RH).
≥ Always remove the card from this unit.
≥ When storing this unit for an extended time, it
is recommended that you charge it once
every year.
≥ The battery used in this unit is a
rechargeable lithium-ion battery. It is
susceptible to humidity and temperature
and the effect increases the more the
temperature rises or falls.
≥ If the operating time is very short even
after the battery has been recharged, the
battery has worn out.
Consult with your dealer.
≥ When the microSD card is being accessed
(when is displayed or the access
lamp is lit), do not perform the following:
j Remove t he microSD card
j Turn the unit off
j Insert and remove the USB cable
j Expose the unit to vibrations or shock
∫ Disposal of Old Equipment and
Batteries
Only for European Union and
countries with recycling systems
These symbols on the
products, packaging, and/
or accompanying
documents mean that used
electrical and electronic
products and batteries
must not be mixed with
general household waste.
For proper treatment,
recovery and recycling of
old products and used
batteries, please take them
to applicable collection
points in accordance with
your national legislation.
By disposing of them correctly, you will
help to save valuable resources and
prevent any potential negative effects on
human health and the environment.
ENGLISH
For more information about collection and
recycling, please contact your local
municipality.
Penalties may be applicable for incorrect
disposal of this waste, in accordance with
national legislation.
Note for the battery
symbol (bottom symbol):
This symbol might be used
in combination with a
chemical symbol. In this
case it complies with the
requirement set by the Directive for the
chemical involved.
Declaration of Conformity (DoC)
Hereby, “Panasonic Corporation” d eclares that
this product is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
Customers can download a copy of the original
DoC to our R&TTE produ cts from our DoC
server:
http://www.doc.panasonic.de
Contact to Authorized Re presentative:
Panasonic Marketing Europe GmbH,
Panasonic Testing Centre, Winsbergring 15 ,
22525 Hamburg, Germa ny
This product is intended for general consumer.
(Category 3)
This product on purpose to connect to access
point of 2.4 GHz WLAN.
(ENG) SQT0253
3
Contents
Information for Your Safety......................2
Preparation
(Important) About the Waterproof/
Dustproof...................................................5
Read this first............................................8
Accessories...............................................9
What you can do with this unit.............. 10
Power supply...........................................11
Charging the battery ......................... 11
Charging and recording time............. 12
Recording to a card ................................13
Cards that you can use with
this unit.............................................. 13
Inserting/removing a microSD card... 14
Turning this unit on/off...........................15
Setting date and time.............................. 15
Using the menu screen ..........................16
Language selection........................... 16
Formatting......................................... 16
Basic
Before recording.....................................17
Wearing this unit ............................... 17
Recording................................................21
Changing the Recording Mode.............. 21
Playback using a smartphone ...............22
Wi-Fi
Wi-Fi® function........................................23
Install the “Image App”...................... 23
Using remote operation with
a direct connection
([SMARTPHONE MODE])................. 24
If the Wi-Fi connection cannot be
established ........................................ 25
Reset Wi-Fi settings.......................... 25
Others
Troubleshooting .....................................26
Requests when disposing of
this unit.................................................... 27
Specifications ......................................... 29
About copyright......................................30
For United Kingdom and Ireland
customers
∫ Sales and Support
Information
Customer Communications Centre
≥ For customers within the UK: 0844 844
3899
≥ For customers within lreland: 01 289 8333
≥ Monday–Friday 9:00 am – 5:00 pm
(Excluding public holidays).
≥ For further support on your product, please
visit our website:
www.panasonic.co.uk
Direct Sales at Panasonic UK
≥ Order accessory and consumable items for
your product with ease and confidence by
phoning our Customer Communications
Centre
Monday–Friday 9:00 am – 5:00 pm
(Excluding public holidays).
≥ Or go on line through our Internet
Accessory ordering application at
www.pas-europe.com
≥ Most major credit and de bit cards accepted.
≥
All enquiries transactions and distrib ution facilities
are provided directly by Panasonic UK.
≥ It couldn’t be simpler!
≥ Also available through our Internet is direct
shopping for a wide range of finished
products. Take a browse on our website for
further details.
.
4
SQT0253 (ENG)
Preparation
(Important) About the Waterproof/
Dustproof
Waterproof/Dustproof Performance
This unit’s waterproof/dustproof rating complies with the “IP58” rating. Provided the care
and maintenance guideli nes described in this document are strictly followed, this unit
can operate underwater, to a depth not exceeding 3.0 m for a time not exceeding
30 minutes. *
This does not guarantee no destruction, no malfunction, or waterproofing in all conditions.
* This means that this unit can be used underwater for specified time in specified pressure in
accordance with the handling metho d established by Panasonic.
∫ Handling of this unit
≥ Waterproofing is not guaranteed if the unit is subject to an impact as a result of being hit or
dropped etc. If an impact to this unit occurs, it should be inspected (subject to a fee) by a
Panasonic’s Service Centre to verify that the waterproofing is still effective.
≥ The waterproof performance may be degraded due to the strong water pressure when this unit is
used deeper than 3.0 m underwater.
≥ When this unit is splashed with detergent, soap, hot spring, bath additive, sun oil, sun screen,
chemical, etc., wipe it off immediately.
≥ Do not rinse with running water, such as tap water.
≥ Waterproof function of this unit is for sea water and fresh water only.
≥ Any malfunction caused by customer misuse, or mishandling will not be covered by the warranty.
≥ Cards are not waterproof. Do not handle with a wet hand. Also, do not insert wet card into this
unit.
≥ Do not open or close the side cover when your hands are wet or water droplets are present on
this unit. Failure to do so may lead to d amage such as rusty terminals caused b y water droplets.
≥ Foreign objects may adhere to the inner side of the side cover (around the rubber seal or
connecting terminals) when the side cover is opened or closed in places with sand or dust
etc. If you close the side cover with foreign objects adhering to it, water may e nter the
inside. Be very car eful because doing so may cause malfunctions.
≥ Do not leave this unit for a long period of time in places where temperature is very low (at high
altitude etc.) or very high (inside a car under strong sunlight, close to a heater, on the beach, etc.)
Waterproof performance may be degraded.
≥ The inside of this unit is not waterproof. Water leakage will cause malfunction.
≥ If any foreign object has adhered to the inner side of the side cover, remove it.
≥ If any liquid such as water droplets has adhered to this unit or inner side of the side cover,
wipe off with a soft dry cloth. Do not open or close the side cover near the water, when
underwater, using wet hands, or when this unit is wet. It may cause water leakage.
≥ The alert sound and shutter sound may be lowered when using this unit. This is for ensuring the
waterproof performance of this unit, and not a malfunction. Opening and closing the side cover
will restore the original volume.
(ENG) SQT0253
5
∫ About Condensation (When the lens or the LCD monitor is fogged
up)
Condensation occurs when there is a change in temperatu re or humidity, such as when the unit is
taken from outside or a cold room to a warm room. Please be careful, as it may cause the lens or
LCD monitor to become soiled, moldy, or damaged.
When taking the unit to a place which has a different temperature, if the unit is accustomed to the
room temperature of the destination for about one hour, condensation can be prevented. (When the
difference in temperature is severe, place the unit in a plastic bag or the like, remove air from the
bag, and seal the bag.)
When condensation h as occurred, turn the unit off, open the side cover and leave the unit like that
for about 2 hours. When the unit become s accustomed to the surrounding temperature, fogginess
will disappear naturally.
Check before using underwater
Do not open or close the side cover in places with sand and dust, close to water, or with wet
hands. Sand or dust adhering may cause water leaks.
1 Open the sid e cover.
1 Slide the LOCK switch A to the left to
unlock the side cover.
B: Unlocked when the red indicator is visible
2 Slide the side cover downward to
open it.
2 Check that there are no foreign objects on the inner side of the side cover.
≥ If there are any foreign objects, such as lint, hair, sand, etc., on the surrounding area, water will
leak within a few seconds causing ma lfunction.
3 If there is foreign matter adhering to the unit, remove it.
≥ Be extremely careful to remove any sand etc. that may adhere to the sides and corners of the
rubber seal.
≥ Wipe it off with a dry soft cloth if there is any liquid. It may cause water leaks and malfunction if
you use this unit with liquid adhered.
4 Check for cracks and deformation of the rubber seal on the side cover.
≥ The integrity of the rubber seals may decrease after abou t 1 year, with use and age. To avoid
permanently dama ging this unit the seals should be replaced once every two years. Please
contact Panasonic’s Service Centre for related costs and other information.
5 Close the side cover securely.
1 Close the side cover and slide it
upward.
2 Slide the LOCK switch to the right to
lock the side cover.
≥ Lock securely to the points where the red
portion of the LOCK switch is no longer
visible .
≥ Securely lock it until it clicks.
≥ To prevent water seeping into this unit, be careful not to trap foreign objects such as liquids, sand,
hair or dust etc.
6
SQT0253 (ENG)
Using this unit underwater
≥ Use this unit underwater at a depth of down to 3.0 m with the water temperature between 0 oC
and 35 oC.
≥ Do not use this unit at a depth of over 3.0 m.
≥ Do not use it in hot water over 35 oC (in a bath or hot spring).
≥ Do not use this unit underwater not longer than 30 minutes continuously.
≥ Do not open or close the side cover.
≥ Do not apply shock to this unit underwater. (Waterproof performance may not be maintained, and
there is a chance of water leak.)
≥ Do not dive into the water holding this unit. Do not use this unit in a location where the water will
splash strongly, such as rapid flow or waterfall. (Strong water pressure may be applied, and it may
cause malfunction.)
≥ This unit will sink in the water. Take care not to drop this unit.
Caring for this unit after using it underwater
Do not open or close the side cover until the sand and dust is removed by rinsing the
camera with water.
Make sure to clean the camera after using it.
≥ Thoroughly wipe off any water droplets, sand, and saline matter on your hands, body, hair, etc.
≥
It is recommended t o clean the camera indoors, avoiding places where water spray or sand may fall.
Do not leave this unit uncared for longer than 60 minutes after using it underwater.
≥ Leaving this unit with foreign objects or saline matter on it may cause damage, discolouration,
corrosion, unusual odour, or deterioration of the waterproof performance.
1 Rinse with water with the side cover closed.
≥ After use at the seaside or underwater, soak the unit in fresh water pooled in a shallow container
for about 10 minutes.
2 Drain water by holding this unit and shaking it lightly a few times.
≥ After using this unit at the seaside or und erwater, or after washing it, water will remain at the
speaker site or mic site of this unit for a while and it may cause lower sound or sound distortion.
≥ Pay careful attention to prevent this unit from dropping.
3 Wipe off water drops on this unit with a soft, dry cloth and dry this unit in a
shaded area that is well ventilated.
≥ Dry this unit approx. 1 hour or more.
≥ Dry this unit on a dry cloth.
≥ Do not dry this unit with hot air from dryer or similar. It will deteriorate the waterproof performance
or cause failure due to deformation.
≥ Do not use chemicals such as benzine, thinner, alcohol or cleanser, soap or detergents.
4 Confirm that there are no water droplets, open the side cover, and wipe off
any water droplets or sand left inside using a soft, dry cloth.
≥ Water droplets may adhere to the card, etc. when the side cover is opened without thoroughly
drying. Also, water may accumulate in the gap around the card slot or the te rminal connector. Be
sure to wipe any water off with a soft, dry cloth.
≥ The water droplets may seep into this unit when the side cover is closed while it is still wet,
causing condensation or failure.
In case water enters this unit, stop the use and consult your dealer.
Malfunctions resulting from water leakage due to wrong handling by customers are not subject to
compensation.
≥ If the Head Mount is exposed to seawater, rinse off the salt water with fresh water. When the
Head Mount is exposed to water, wipe it off with a dry towel or something similar, and dry it
thoroughly in the shade.
(ENG) SQT0253
7
Preparation
Read this first
∫ About recording formats and compatibility of this unit
≥ This unit is an MP4 format (MPEG-4 AVC file standard)* Wearable Camera for recording high-
definition motion pictures.
* You can record 4K motion pictures ([3840k2160/25p]).
≥ AVCHD and MPEG2 motion pictures are different formats, and are not therefore supported by
this unit.
≥ Motion pictures recorded with other de vices are not supported by this unit.
∫ About the portrait rights
Be sure to pay special atte ntion to the privacy, the portrait rights, etc. of the subject when you use
this unit. Use it at your own risk.
∫ Indemnity about recorded content
Panasonic does not accept any responsibility for damages directly or indirectly due to any type
of problems that result in loss of recording or edited content, and does not guarantee any
content if recording or editing does not work properly. Likewise, the above also applies in a case
where any type of repair is made to this unit.
∫ About the “Image App”
Install the smartphone application “Image App” on your smartphone. You can enjoy a variety of
functions by setting up a Wi-Fi connection between this unit and a smartphone. (l 10)
≥ For information about the installation of the “Image App”, refer to page 23.
∫ Installing HD Writer WE 2.0
Check the website below to download/install the software.
http://panasonic.jp/support/global/cs/soft/download/f_we20.html
∫ About the clock setting
Make sure to set date and time before recording. (l 15)
∫ For the purposes of these operating instructions
≥ Pictures may be slightly different from t he original.
≥ Depending on the firmware version you are using, captured screens described in these operating
instructions may differ from the actual screens.
≥ Names, icons, contents and services of applications may be changed with no prior notice. Please
note that they may differ from the descriptions of these operating instructions.
≥ microSD card and microSDHC card are referred to as the “microSD card”.
≥ Smartphone and tablet computer are referred to as the “smartphone”.
≥ Pages for reference are indicated by an arrow, for example: l 00
8
SQT0253 (ENG)
≥ Smartphone operations are described as follows:
Tap
Touch the screen
lightly and release
your finger.
Drag
Move your finger
while still touching
the screen.
∫ Cards that you can use with this unit
microSD Memory Card and microSDHC Memory Card
Preparation
Accessories
Check the accessories before using th is unit.
Keep the accessories out of reach of children to prevent swallowing.
Product numbers correct as of April 2014. These may be subject to change.
Armband Case
SFC0147
Head Mount (L)
SYA0004
Head Mount (R)
SYA0006
Headband
SFC0159
≥ The Headband comes standard with the
Head Mount (R).
*
*
Optional accessories
Some optional accessories may not be
available in some countries.
Multi Mount (VW-MKA100)
Tripod Mount (VW-CTA100)
Suction Cup Mount (VW-SCA100)
Wind Jammer (VW-WJA100)
Video Camera Mount (For Handlebar)
(RP-CMC10)
Clip Mount (VW-CLA100)
Multi Case (VW-HLA500)
Multi Belt (VW-MBA100)
Head Mount (VW-HMA100)
* To use the Suction Cup Mount/VW-SCA100
and Video Camera Mount (For Handlebar)/
RP-CMC10, the Tripod Mount/VW-CTA100 is
required.
*
Drag and Drop
Move your finger
while still touching
the screen, and
release the finger.
*
USB cable
K2KYYYY00221
* For information on how to assemble the Head
Mount, refer to page 19.
(ENG) SQT0253
9
Preparation
XXXXXXXXX
1080/30p
What you can do with this unit
You can enjoy a variety of functions by setting up a Wi-Fi connection between this unit and a
smartphone or a wireless access point.
≥ Recording motion pictures/still pictures (l 21)
≥ Menu settings (l 16)
Wi-Fi Connection with a smartphone
Image App
≥ Playback (l 22)
≥ Deletion/Copy
≥ Remote operation (l 24 )
A DLNA-compatible devices
10
SQT0253 (ENG)
Wi-Fi Connection with a wireless access point
LUMIX CLUB
USTREAM
Live broadcasting
Using the “LUMIX CLUB” and USTREAM services, you can
broadcast live motion pictures.
Playback on DLNA-compatible devices
You can play back the contents stored in this unit on the DLNAcompatible TV.
Preparation
Power supply
Charging the battery
When this unit is purchased, the battery is not charged. Char ge the battery fully before
using this unit for the first time.
≥ This unit has a built-in rechargeable lithium-ion battery. Do not remove except when
disposing of this unit. (l 27)
≥ The battery will not be charged if this unit is turned on. Connect it with the PC to charge
the battery after turning it off.
≥ It is recommended to charge the battery in a temperature between 10 oC and 30 oC.
A LOCK switch
B USB cable (supplied)
C Unlocked when the red indicator is visible
D Turn the side with the symbol up to connect the micro B end of the USB cable to the USB
terminal of this unit.
1 Slide the LOCK switch to the left to unlock the side cover and slide the side
cover downward to open it.
2 Connect the USB terminal of this unit to a PC with the USB cable (supplied).
≥ Insert the USB cable securely all the way.
≥ The Power lamp w ill flash red at an interval of 2 seconds (approximately 1 second on, 1 second
off), indicating that charging has begun.
It will turn off when the charging is completed.
≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any
other USB cables.)
≥ Do not heat or expose to flame.
≥ Do not leave the unit (including built-in battery) in a car exposed to direct sunlight for a long
period of time with doors and windows closed.
≥ If operating time is short even after fully charging the battery, the battery is w orn out and needs to
be replaced. Please contact your dealer.
(ENG) SQT0253
11
≥ When the PC is in a power saving mode such as a standby state, the battery may not be charged.
Cancel the power saving mode, and connect this unit again.
≥ Operation is not guaranteed when de vices are connected through USB hubs or by using
extension cables.
≥ Operation cannot be guaranteed on all devices having a USB terminal.
Charging and recording time
∫ Charging/Recording time
≥ Temperature: 25 oC/humidity: 60%RH
Charging time Picture size/Frame rate
[3840k2160/25p] 1 h 25 min 45 min
[1920k1080/50p] 2 h 1 h
[1920k1080/25p] 2 h 20 min 1 h 10 min
[1280k720/50p] 1 h 55 min 1 h
4h30min
≥ “h” is an abbreviation for hour, “min” for minute and “s” for second.
≥ These times are approximations.
≥ The indicated char ging time is for when the battery has been discharged completely.
Charging time and recordable time vary depending on the usage conditions such as high/
low temperature.
≥ The actual recordable time refers to the recordable time when repeatedly starting/stopping
recording, turning this unit on/off, etc.
≥ The power lamp flashes (Flashing with approx. 1 second period (off for approx. 0.5 second, on for
approx. 0.5 second)) when the remaining battery time becomes low.
≥ The main unit heats up after use or charging. This is not a ma lfunction.
≥ For information ab out charging with a mobile USB charger or an AC adap tor, check the support
site.
http://panasonic.jp/support/global/cs/e_cam/index.html
(This site is English only.)
The mains plug is the disconnecting device. Install this unit so that the mains plug can be
unplugged from the socket outlet immediately.
[1280k720/25p] 2 h 15 min
[1920k1080/50fps] 2 h 15 min
[1280k720/100fps] 2 h 10 min
[848k480/200fps] 2 h 5 min
Maximum continuous
recordable time
Actual recordable
time
1h10min[848k480/25p] 2 h 20 min
1h5min
Battery capacity indication
≥ The display changes as the battery capacity reduces. ####
If the battery discharges, then will flash red.
12
SQT0253 (ENG)
When the Power lamp is flashing during charging
Flashing with approx. 0.5 second period (off for approx. 0.25 second, on for approx. 0.25 second):
≥ Check that the USB terminals of this unit or the connecting device, such as PC are not dirty or
covered with a foreign object, and reconnect correctly. If a foreign object or dirt is present, turn off
this unit before removing.
≥ The environment is at an extremely high or low temperature. Wait until the temperature has
returned to an appropriate level and try charging again. If you are still unable to charge, th ere may
be a fault in this unit or the connecting device.
Flashing with approx. 4 second period (off for approx. 2 seconds, on for approx. 2 seconds):
≥ When the battery is over discharged or the temperature of the battery is too high or low. It can be
charged, but it may take a few hours to complete the charging normally.
≥ It will flash in approx. 2 second intervals when normal charging resumes. Even in such cases, it
may start flashing in approx. 4 second intervals until charging is completed depending on the
conditions of use.
Off:
≥ Charging has finished.
Preparation
Recording to a card
This unit can record motion pictures or still pictures to a microSD card.
Cards that you can use with this unit
≥ To record motion pictures, use a microSD card that supports one of the following SD
Speed Class Ratings.
If you use a microSD card with an SD Speed Class Rating that does not support the
current recording setting, recording may stop suddenly.
Recording settings Supported SD Speed Class Ratings
When [PIX ELS / FRAME RATE] is set to
[3840k2160/25p]
When [RECORDING MODE] is set to [SLOW
MOTION] (l 21)
Settings other than the above Class 4 or higher of the SD Speed
Class 10 or higher of the SD Speed
Class Rating
Class 6 or higher of the SD Speed
Class Rating
Class Rating
≥ Please check the latest information on the support web site below.
http://panasonic.jp/support/global/cs/e_cam/i ndex.html
(This website is in English only.)
≥ Operation is not guaranteed for all microSD cards.
≥ Keep the Memory Card out of reach of children to prevent swallowing.
(ENG) SQT0253
13
Inserting/removing a microSD card
When using a microSD card not from Panasonic, or one previously used on other eq uipment, for
the first time on this unit, format the microSD card. (l 16) When the microSD card is formatted,
all of the recorded data is deleted. Once the d ata is deleted, it cannot be restored.
Caution:
Check that the acces s lamp has gone off.
A Access lamp
≥ When this unit is accessing the
microSD card (such as
recognition, recording, playback
and deletion), the access lamp
lights up.
B LOCK switch
C Unlocked when the red
indicator is visible
1 Slide the LOCK switch to the left to unlock the side cover and slide the side
cover downward to open it and then insert (remove) the microSD card into
(from) the card slot.
≥ Face the terminal side D upward and press it straight in as far as it will go.
≥ Press the centre of the microSD card and then pull it straight out.
2 Close the side cover and slide the LOCK switch to the right to lock it.
≥ Close the side cover and slide it upward and then lock it.
≥ Securely lock it until it clicks.
14
SQT0253 (ENG)
Preparation
Turning this unit on/off
Press the power button to turn on this unit.
The power lamp is turned on.
Preparation
To turn off this unit
Hold down the power butt on until the power
lamp goes off.
Setting date and time
The clock is not set at the time of purchase. Make sure to set the clock.
1 Press the joystick to select the menu. (l 16)
[SETUP] # [CLOCK SET]
2 Move the joystick right or left to select the date to be set, then move the
joystick up or down to select the desired value.
≥ Press the joystick or recording start/stop button to enter the selection.
≥ The year can be set between 2000 and 2039.
3 Move the joystick right or left to select the time to be set, then move the
joystick up or down to select the desired value.
≥ Press the joystick to enter the selection.
4 Press the recording start/stop button to complete the setting.
≥ When the unit is turned on for the first time, a message asking you to set th e date and time will
appear. Select [YES] and perform Steps 2 to 3 to set the date and time.
(ENG) SQT0253
15
Preparation
Using the menu screen
1 Press the joystick.
2 Select the top menu A,
then press the joystick.
RECORD SETUP
EXIT
3 Select the submenu B, then press
the joystick.
RECORD SETUP
RECORDING MODE
PIXELS / FRAME RATE
ANGLE OF VIEW
Delay-Start REC
1/3
EXIT
4 Select the desired item,
then press the joystick
to enter the selection.
To get back to the previ ous scr een
Move the joystick left.
To exit the menu screen
Press the recording start/stop button.
Language selection
You can select the language on the screen
display and the me nu screen.
[SETUP] # [LANGUAGE] #
desired language
Formatting
Please be aware tha t if a microSD card is
formatted, then all the data recorded on the
microSD card will be erased and canno t be
restored. Back up important data on a PC,
etc.
[SETUP] # [FORMAT MEDIA] # [YES]
≥ Do not format a microSD card using
any other equipment such as a PC. The
card may not be used on this unit.
16
SQT0253 (ENG)
Basic
≥ If a feeling of discomfort arises after a long
period of use, stop the use or adjust the
size of the Head Mount/Armband Case/
Headband to loosen them a little. Please
note that the parts may leave marks on
your face and other body parts after use.
≥ For the direction of the camera, check the
actual image on the LCD monitor.
A Camera unit
B Main unit
A Hook and loop fastener
B Hard surface of the hook and loop
fastener
C Hook and loop fastener
Before recording
This unit is designed to record images when attached to the Armband Case and th e Head Mount.
Wearing this unit
Wear the main unit and camera unit.
Fastening the main unit using the Armband Case
1 Insert the main unit so that you can see the
buttons on it
≥ Make sure to insert the main unit all the way in.
2 Fasten the main unit with the hook and
loop fastener.
3 Adjust the length of the band.
(ENG) SQT0253
17
4 Pass the band through the band hole.
D Hard surface of the hook and loop
fastener
5 Attach the band to the hard surface of
the hook and loop fastener to fasten
the band to your arm.
≥ When fastening the main unit, try not to drop the
camera unit to avoid a shock and try not to
scratch the lens.
∫ About the Armband Case
The Armband Case can be used as a portable holder.
≥ The camera unit can be stored in the camera pocket B, and the camera/main unit connection
cable can be bundled with the band A.
≥ When fastening to your arm, remove the camera unit from the Armband Ca se.
≥ When removing the camera/main unit from the Armband Case, avoid pulling the camera/main
unit connection cable.
≥ Do not forcibly bend or pull the cable. Be extra careful in low temperatures, which cause the
cable to become fairly inflexible.
≥ Optional accessories will be handy in various scenes. (l 9)
18
SQT0253 (ENG)
Assembling the Head Mount
A Lock lever
B Adjustment knob
C Camera holder
A Microphone
B Cable holder
C Camera/main unit connection
cable
1 Push down the lock lever of the Head
Mount (L) to the UNLOCK side.
2 Attach the Head Mount (R) to the Head Mount (L).
3 Loosen the adjustment knob, and
change the direction of the camera
holder.
≥ To loosen the adjustment knob, rotate it
towards 1. To tighten the adjustment knob,
rotate it towards 2.
≥ Adjust the direction as shown in the illustration,
and tighten the ad justment knob again.
Attaching the camera unit to the Head Mount to wear
1 Insert the camera unit until it clicks
into place.
≥ Insert the camera unit so that the microphone
faces inward.
2 Fit the camera/main unit connection
cable in the cable holder.
≥ Loosen the cable to make the shape of the
Head Mount.
(ENG) SQT0253
19
3 Hook the Head Mount to your ears
D Adjustment knob
E Camera holder
firmly so that the camera unit will be
positioned on the left side of your
face.
4 Adjust the size of the Head Mount,
and push down the lock lever to the
LOCK side.
≥ Adjust by slowly pulling the Head Mo unt (R)
sideways.
≥ If you adjust in such a way that the camera unit comes into close contact with the cheek, you can
record less blurry images.
5 Hold the camera holder, and adjust
the direction of the lens.
≥ To loosen the adjustment knob, rotate it
towards 1. To tighten the adjustment knob,
rotate it towards 2.
≥ If the direction of the lens cannot be changed,
loosen the adjustment knob slightly and t ighten
it after adjusting the direction of the lens.
≥ If the camera unit is shaky, tighten the
adjustment knob.
∫ How to remove the camera
Hold the camera holder as shown in the figure, and remove the
camera unit in the direction of the arrow.
≥ Do not touch the lens or pull the camera/main unit connection cable while attaching or removing.
≥ When adjusting the size of the Head Mount and the tightness of the Headband, do so slowly
without applying to o much force.
≥ If the adjustment knob comes off, attach it as indicated in the
right figure.
Things to check after putting on this unit
We recommend you make a test recording to check the settings such as the [ANGLE OF VIEW],
[LEVEL SHOT], [IMAGE STABILIZATION] and [WHITE BALANCE] before recording.
≥ Please refer to “Operating Instructions (PDF format)“ for details.
20
SQT0253 (ENG)
Basic
Recording
≥ Set this unit to the desired Recording Mode before recording.
1 Press the recording start/stop button.
≥ If this unit is set to record a motion picture, recording
starts.
≥ In [PICTURE RECORDING], a still picture will be
recorded.
≥ Once recording starts, the LCD monitor will turn off
approximately 30 seconds later. To turn it on again,
operate the joystick.
A When you begin recording a motion picture, ;
changes to ¥.
2 (When recording a motion picture)
Press the recording start/stop button again
to pause recording.
Basic
Changing the Recording Mode
You can record images with a variety of recording method s by changing the Recording Mode.
1 Press the joystick to select the menu.
[RECORD SETUP] # [RECORDING MODE] # desired recording mode
Recording Mode icon Recording method
[NORMAL SHOOTING] Recording motion pictures.
[SLOW MOTION] This records motion pictures in slow motion by
[LOOP RECORDING] No matter how long you record, you can only record
[PICTURE RECORDING] Recording still pictures.
* To set this unit to [PICTURE RECORDING] with the “Image App”, tap the Motion Picture/Still
Picture toggle button.
2 Start recording.
setting a high frame rate (increasing the number of
frames).
motion pictures for the last 1 hour to microSD card.
*
≥ When recording in [SLOW MOTION], use a microSD card with an SD Speed Class Rating of 6 or
higher.
(ENG) SQT0253
21
Basic
A Slide bar
Playback using a smartphone
Motion pictures or still pictures stored in this unit are played back with the smartphone.
≥ For more information, refer to the [Help] in the “Image App” menu.
Preparation:
1 Install the smartphone application “Image App” on your smartphone. (l 23)
2 Set up a Wi-Fi connection between this unit and the smartphone, and perform remote
operation. (l 24)
1 Tap .
≥ The thumbnails of motion pictures or still pictures recorded on this unit will be displayed.
2 Tap ( ).
≥ To play back a motion picture, tap ; to play back a still picture, tap .
3 Tap the thumbnail of motion picture or still picture you want to play back.
≥ The playback screen will be displayed.
≥ If you have tapped a still picture, you can play back the p revious or next picture by dragging
(swiping) the screen left or right.
4 (For playing back motion pictures)
Tap the playback icon on the screen to play back
motion pictures.
≥ Tapping or dragging the slide bar will start playback from the
desired position o f a motion picture file.
00:20 03:10
22
SQT0253 (ENG)
Wi-Fi
Wi-Fi® function
To provide a Wi-Fi connection example, th ese basic operating instructions describe the procedures
from setting up a direct connection bet ween this unit and a smartphone to getting them ready for
remote operation.
≥ Please refer to the o perating instructions (PDF format) of this unit for details about the setting/
operating of this unit.
≥ Please refer to the operating instructions of the device in use for details about the setting/
operating of the wireless access point or smartphone.
∫ This unit is NFC-compatible
Using the NFC (Near Field Communication) function, you can easily transfer data necessary for a
Wi-Fi connection between this unit and the smartphone.
This function can be used with the NFC compatible device with Android
later). (Except for some models)
Install the “Image App”
About the “Image App”
The “Image App” is an application provided by Panasonic.
™
(OS version 2.3.3 or
For Android apps For iOS apps
OS Android 2.3.3 or later
Installation
procedure
1 Connect your Android
device to a network.
2 Select “Google Play™
Store”.
3 Enter “Panasonic Image
App” into the search
box.
4 Select “Panasonic
Image App” and install
it.
≥ The icon will be added
to the menu.
* The supported OS versions are current as of April 2014 and subject to change.
≥ Use the latest version.
≥ The service may not be able to be used properly depen ding on the type of smartphone being
used. For information on the “Image A pp”, check the support website below.
http://panasonic.jp/support/global/cs/e_cam/index.html
(This Site is English only.)
≥ When downloading the app on a mobile network, high packet communication fees may be
incurred depending on the details of your contract.
*
iOS 5.0 or later
*
1 Connect your iOS
device to a network.
2 Select “App Store
SM
”.
3 Enter “P anasonic Image
App” into the search
box.
4 Select “Panasonic
Image App” and install
it.
≥ The icon will be added
to the menu.
(ENG) SQT0253
23
Using remote operation with a direct connection
([SMARTPHONE MODE])
∫ Preparations before using remote operation
1 Install the smartphone application “Image App” on your smartphone. (l 23)
2 Check if the smartphone is an Android (NFC-compatible), Android (non-NFC-
compatible), or iOS device.
≥ If your smartphone is NFC-compatible, a message asking you to touch the NFC mark on the
device will be displayed when starting up the “Image App”.
∫ If the device is Android (NFC-compatible)
≥ Set the NFC function of the smartphone to on.
1 Start up the smartphone application “Image App”.
2 Touch the smartphone on of this unit.
≥ Touch the NFC mark while a message a sking you to touch the NFC
mark on the device is displayed on the smartphone screen.
≥ If this is the first time the smartphone is connecting to this unit, the
message is displayed on the screen o f this unit. Select [YES], press
the joystick, and then tou ch the smartphone on of this unit again.
≥ If the unit is not recognised even when touching the smartphone,
change positions and try again.
≥ You cannot set up a connection when recording an image with this unit or the menu screen is
displayed.
≥ When the connection is complete, images of this unit is displayed on the smartphone screen.
∫ If the device is Android (non-NFC-compatible) or iOS
≥ This operation is not possible while this unit is recording.
1 Press the joystick to select the menu.
[Wi-Fi SETUP] # [Wi-Fi MODE]
2 Select the [SMARTPHONE MODE], press the joystick, th en start up the
[SMARTPHONE MODE].
≥ A Wi-Fi mode icon ( ) will be displayed on the screen.
3 On the smartphone, select the SSID displayed on this unit from the Wi-Fi
setup menu.
4 Enter the Password displayed on this unit’s screen on the smartphone.
Confirming that the Wi-Fi connection is complete
j is displayed on the screen
5 Start up the smartphone application “Image App”.
≥ When the connection is complete, images of this unit is displayed on the smartphone screen.
24
SQT0253 (ENG)
If the Wi-Fi connection cannot be established
≥ Please refer to the operating instruction of the device in use for details about the setting of the
wireless access point or smartphone.
Problem Check points
The Wi-Fi connection is
not possible between this
unit and a smartphone.
It takes long time every
time to connect to a
smartphone.
This unit is not displayed
in the Wi-Fi setting screen
of the smartphone.
The Wi-Fi connection is
disconne cted immediate ly.
Cannot be connected
using NFC.
≥ Make sure the smartpho ne is properly conn ected to this unit
by checking the Wi-Fi settings of the smartphone.
≥ Make sure the SSID and Password have been correctly input.
≥ Make sure the smartpho ne is not connected to the wireless
access point. If it is connected to the wireless access point,
change the Wi-Fi access point using the smartphone’s Wi-Fi
set up.
≥ It may take longer time to connect depending on the Wi-Fi
connection setting of the smartphone, but it is not a
malfunction.
≥ Try switching the on/off of the Wi-Fi function in the Wi-Fi
settings of the smartphone.
≥ If there is a setting for avoiding poor connections in the Wi-Fi
setting menu of the Android device 4.0 or later version, turn it
off.
≥ Make sure your smartphon e is compatible with NFC. This unit
can be used with NFC-compatible terminals via Android (OS
version 2.3.3 or later).
≥ Make sure the NFC function of your smartph one is on.
≥ Make sure this unit is turned on.
≥ Some smartphones cannot be easily checked simply by
touching. If this unit is not recognised even after touching,
change positions and try again by touching slowly.
≥ Touch again if it does not connect after touch.
If a connection still cannot be established, shut down the
“Image App”, turn off this unit and try to establish a
connection again.
≥ If the amount of time this unit is in contact with the
smartphone is too short, this unit may not recognise the
smartphone. Touch and hold the smartphone.
Reset Wi-Fi settings
You can change the Wi-Fi setting back to the default condition. The “LUMIX CLUB” Login ID can
also be deleted.
1 Press the joystick to select the menu.
[Wi-Fi SETUP] # [RESET Wi-Fi SETTINGS] # [YES]
2
(To delete the Login ID of the “LUMIX CLUB”)
Select [YES], then press the joystick.
(ENG) SQT0253
25
Others
Troubleshooting
∫ It is not a malfunction in following cases
The lens or LCD monitor
fog up.
The alert sound and
shutter sound are low.
Problem Check points
This unit cannot be turned
on.
This unit does not stay on
long enough.
Battery runs down quickly.
The po wer lamp flas hes
for approximately
5 seconds, and the unit
turns off approximately
30 seconds later.
Colour balance of images
is strange when recording
in a place such as a
gymnasium.
Recorded motion pictures
flicker.
Horizontal lines appear in
recorded movies.
≥ This is due to condensation. It is not a malfunction. Please
refer to page 6.
≥ This is for ensuring the waterproof performance of this unit,
and not a malfunction. Opening and closing the side cover will
restore the original volume.
≥ Charge the battery again to ensure it is sufficiently charged.
(l 11 )
≥ In cold places, the battery using time becomes shorter.
≥ If the operating time is very short even after the battery has
been recharged sufficiently, the battery has worn out. Consult
with your dealer.
≥ The temperature has become high. Please wait until the
temperature of this unit decreases.
≥ In a place with multiple light sources, such as a gymna sium or
a hall, set the White Balance setting to (Indoor 2). If you
cannot record clearly with the (Indoor 2), set it with
[CUSTOM].
≥ If you record an image with [1280k720/100fps] or [848k480/
200fps] in [SLOW MOTION], flickering or horizontal lines may
appear under fluorescent lighting.
Please refer to “Operating Instructions (PDF format)“ for details.
26
SQT0253 (ENG)
Others
Requests when disposing of this unit
When disposing of your used products, remove the battery built into this unit after
performing [RESET Wi-Fi SETTINGS] (l 25), and please cooperate in recycling of the
battery. Please refer to page 28 about how to remove the battery.
≥ Please make sure that the battery is disposed of at an officially assigned location, if there is one in
your country.
Do not disassemble this unit other than when disposing of this unit.
This is the rechargeable battery for this unit.
Do not use other than with this unit.
Do not charge the rechargeable battery
when it has been removed.
≥ Do not place in fire or heat it.
≥ Do not puncture with nails, subject it to
impact, disassemble or modify it.
≥ Do not touch metal to the r and s terminals.
≥ Do not store or carry together with necklaces
or hairpins, etc.
≥ Do not heat in microwaves or ovens, etc.
≥ Do not charge, use or leave in hot places
such as next to fires or in extremely hot
weather.
≥ Do not put into water.
This may cause leaking, overheating, fire or
rupture.
≥ If a leak should occur, by no means touch the
liquid with bare hands.
If the liquid gets on the body or clothes, wash
well with water. If the liquid gets into your
eyes, there is a danger of blindness. Do not
rub the eyes; after washing immediately with
clean water, consult your physician.
Keep removed screws etc. out of the reach
of small children.
If accidentally ingested there will be adverse
physica l effec ts.
≥ Should you suspect that such an object has
been ingested, consult your physician
immediately.
Battery used for this unit
Name: Lithium ion (Li-ion)
Nominal voltage: DC 3.7 V
rechargeable battery
(ENG) SQT0253
27
How to remove the battery
When disposing of your used products, perform [RESET Wi-Fi SETTINGS] to delete personal
information from this unit.
This figure describes the disposal of this unit, it is not instruction for repair. If
disassembled, repair is not possible.
≥ Disassemble after the battery runs out.
≥ If it cannot be remo ved smoothly, contact Panasonic’s Service Centre.
≥ Keep disassembled parts out of reach of children.
1 Open the side cover, and remove
all of the 6 screws indicated in the
figure below.
≥ Use a cross-slot screwdriver (commercially
available).
2 Remove the connector A of the
flexible circuit board, and remove
the circuit board on the front side
(button side) of this unit.
4 Remove the 4 screws indicated in
the figure below, and remove the
heatsink D.
5 Remove the connector E of the
camera unit, the built-in battery
connector F, and the NFC flexible
circuit board G, and lift up the
circuit board.
3 Pull out the flexible circuit board
B, and pull out the speaker
connector C upwards.
28
SQT0253 (ENG)
6 Remove the battery by using a
screwdriver.
Regarding the handling of used batteries
≥ Insulate the terminals with cellophane tape or
similar.
≥ Do not disassemble.
Others
Specifications
Wearable camera
Information for your safety
Power source: 3.7 V (When using battery)/5.0 V (When using USB)
Power consumption: Recording; 4.3 W
Charging; 2.3 W
Motion picture recording format:
MPEG-4 AVC file format compliant (.MP4)
≥ For picture size, recordable time and transfer
rate of a motion picture, refer to the
operating instructions (PDF format).
Motion picture compression:
MPEG-4 AVC/H.264
Audio compression:
AAC
Still picture recording format:
JPEG (Design rule for Camera File system,
based on Exif 2.2 standard)
≥ For picture size of a still picture and number
of recordable pictures, refer to the operating
instructions (PDF format).
Recording media:
microSD card (512 MB/1 GB/2 GB),
microSDHC card (4 GB/8 GB/16 GB/32 GB)
Image sensor:
1/2.3 type (1/2.3z) 1MOS image sensor
Total; Approx. 12760 K
Effective pixels;
Motion picture; Approx. 9030 K (16:9)
Still picture; Approx. 8340 K (16:9)
Lens:
F2.8
Focal length; 3.4 mm
Angle of view; Up to approx.160 o
Minimum focus distance; Approx. 50 cm
*1 When [ANGLE OF VIEW] is set to [WIDE],
[PIXELS / FRAME RATE] is set to
[1920k1080/25p ] and [RECORDING
MODE] is set to [NORMAL SHOOTING]
*2 When [ANGLE OF VIEW] is set to [WIDE]
and [RECORDING MODE] is set to
[PICTURE RECORDING]
*1
*2
*1
Shutter speed:
Motion picture; 1/25 to 1/12000
Still picture; 1/6 to 1/12000
Image stabilizer function:
Electronic image stabilizer
Level shot function:
[STRONG]/[NORMAL]/[OFF]
Monitor:
3.7 cm (1.5z) LCD monitor (Approx. 115 K dots)
Microphone:
Monaural
Minimum required illumination:
Approx. 6 lx
Approx. 1 lx with the Colour Night View
function
USB:
Reader function
microSD card; Read on ly (No copyright
protection support)
Battery charging function (Charges from USB
terminal when the m ain unit is off)
Hi-Speed USB (USB 2.0), USB terminal Type
micro-B
Dime nsions:
Camera unit;
26.5 mm (W)k26.5 mm (H)k68.5 mm (D)
Main unit;
59.5 mm (W)k94.0 mm (H)k26.7 mm (D)
Mass:
Camera unit;
Approx. 31
[Excluding the cable portion]
Main unit;
Approx. 128
Mass in operation:
Approx. 185
[with a microSD card (optional)]
Operating temperature:
0 oCto40oC
g
g
g
(ENG) SQT0253
29
Operating humidity:
10%RH to 80%RH
Waterproof/Dustproof performance:
Equivalent to IEC 605 29 “IP58”
Battery operation time:
See page 12
Others
About copyright
Wireless transmitter:
Compliance standard; IEEE802.11b/g/n
Frequency range used;
Central frequency 241 2 MHz to 2462 MHz [11ch]
Encryption method; Wi-Fi compliant WPA™/
™
WPA2
/WEP
Access method; Infrastructure mode
NFC:
Compliance standard; ISO/IEC 18092 NFC-F
(Passive Mode)
∫ Carefully observe copyright
laws
Recording of pre-recorded tapes or discs or
other published or broadcast material for
purposes other than your own private use
may infringe copyright laws. Even for the
purpose of private use, recording of certain
material may be restricted.
∫ Licenses
≥ microSDHC Logo is a trademark of SD-3C,
LLC.
≥ App Store is a service mark of Apple Inc.
≥ Android and Google Play are trademarks or
registered tradem arks of Google Inc.
≥ The Wi-Fi CERTIFIED Logo is a certification
mark of the Wi-Fi Alliance.
≥ The Wi-Fi Protected Setup Mark is a mark of
the Wi-Fi Alliance.
≥ “Wi-Fi”, “Wi-Fi Protected Setup”, “WPA” and
“WPA2” are marks or registered marks of the
Wi-Fi Alliance.
≥ The N-Mark is a trademark or registered
trademark of NFC Forum, Inc. in the United
States and in other countries.
≥ DLNA, the DLNA Logo and DLNA
CERTIFIED are tradema rks, service marks,
or certification marks of the Digital Living
Network Alliance.
≥ Other names of systems and products
mentioned in these instructions are usually
the registered trademarks or trademarks of
the manufacturers who developed the system
or product concerned.
This product is licensed under the AVC patent
portfolio license for the personal and
non-commercial use of a consumer to (i)
encode video in compliance with the AVC
Standard (“AVC Video”) and/or (ii) decode AVC
Video that was encoded by a consumer
engaged in a personal and non-comm ercial
activity and/or was obtained from a video
provider licensed t o provide AVC Video. No
license is granted or shall be implied for any
other use. Additional information may be
obtained from MPEG LA, LLC.
See http://www.mpegla.com
.
30
SQT0253 (ENG)
This product incorporates the following software:
(1) the software developed independently by or for Panasonic Corporation,
(2) the software owned by third party and licensed to Panasonic Corporation,
(3) the software licensed under the GNU General Public License, Version 2.0 (GPL V2.0),
(4) the software licensed under the GNU LESSER General Public License, Version 2.1
(LGPL V2.1), and/or
(5) open source software other than the software licensed under the GPL V2.0 and/or LGPL V2.1.
The software categorized as (3) - (5) are distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE. For details, refer to the licence information described in the supplied
leaflet “Open Source Software Information”.
At least three (3) years from delivery of this product, Panasonic will give to any third party who
contacts us at the contact information provided below, for a charge no more than our cost of
physically performing source code distribution, a complete machine-readable copy of the
corresponding source code covered unde r GPL V2.0 or LGPL V2.1, as well as the respective
copyright notice thereof.
Contact Information: oss-cd-request@gg.jp.panasonic.com
The source code and the copyright notice are also available for free in our website below.
http://panasonic.net/avc/oss/index.html
(ENG) SQT0253
31
Loading...