Panasonic hx-a100 installation

HX-A100 Firmware update service

Firmware Update Procedures (Overview)

1. Step1. Confirmation of the product

2. Step2. Download the latest Firmware

3. Step3. Copying updating software to microSD card

4. Step4. Firmware update

5. Step5. Confirming version number of the firmware

6. Stpe6. Handling of microSD card

Step1. Confirmation of the product

How to confirm

1. Activate this model and connect with smartphone by Wi-Fi.

2. Activate Image App, then tap.

--> [Camera setup] --> [Device info. display]

3. We recommend firmware update if it is Ver1.00.

The update is not necessary if it is ver.1.10 or above.

Step2. Download the latest Firmware

If the version of the firmware installed in your recorder is lower than the latest version of
the firmware available, please download the latest version of the firmware.

Use of software downloaded from this site requires following License Agreement. Please
review the contents of the License Agreement beforehand.

Step2. Download the latest Firmware

Please download the updating software.

For Windows Users

1. Make a temporary folder on your PC for downloading the file,e.g. C:/Temp.

2. Download and save the firmware in the folder you created in the above step.

3. Double click the downloaded file
You may see following screen after you have double clicked the downloaded file,
please click "Run" button and move to the next step.

4. The self-extracted file UPDATE.HDC will appear.
The file size for UPDATE.HDC should be 33,532,432 Bytes.
If the file size is not the same, please download and double click the file again.
The file size can be checked by right-clicking on the file and selecting properties.

For Macintosh Users