Panasonic HDC-TM80P-PC, HDC-SD80P-PC, HDC-HS80P-PC User Manual

For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo

For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca

Owner’s Manual

High Definition Video Camera

Model No.HDC-SD80P/PC

HDC-TM80P/PC

HDC-HS80P/PC

Before connecting, operating or adjusting this product, please read the instructions completely.

VQT3J15

Things You Should Know

Thank you for choosing Panasonic!

You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Pleas e take time to fill in the information on the right. The serial number is on the tag loca te d on the underside of your camera. Be sure to retain this manual as your convenient camera informat ion source.

Date of Purchase Dealer Purchased From Dealer Address Dealer Phone No. Model No. Serial No.

Safety Precautions

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, ≥ DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR

SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

≥ USE ONLY THE RECOMMENDED ACCESSORIES.

DO NOT REMOVE T HE C O VER (OR BAC K); THE R E AR E NO U S ER S ERVICEABLE

≥

PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION!

DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.

VQT3J15

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

HDC-TM80PHDC-SD80P HDC-HS80P

FCC Note:

This equipment has been tested and found to comply with the limits for a Class B dig i tal device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, a nd can radia te radio fr equenc y energy and, if not inst alled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installa tion. If this equipment does cause harmful interference to radio or television recept ion, whic h ca n be determin ed b y tur ning th e eq uipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

≥ Reorient or relocate the receiving antenna. ≥ Increase the separation between the equipment and receiver. ≥ Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

≥ Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, follow the at tached installation

instructions and use only shielded interface cables with ferrite

core when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by the party responsible for compliance could void the us er’s authority to operate this equipment. Declaration of Conform ity Trade Name: Panasonic Model No.: HDC-SD80P/HDC-TM80P/HDC-HS80P Responsible party: Panasonic Corporation of North Amer ica

One Panasonic Way, Secaucus, NJ 07094 Support Contact: Panasonic Consumer Electronics Company

1-800-211-PANA (7262) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This dev ice may not c ause harmf ul interfer ence, and (2) this device mus t accept any interference received, including interference that may cause undesired operation.

THE FOLLOWING APPLIES ONLY IN CANADA.

This Class B digital apparatus complies with Canadian ICES-003.

VQT3J15

AC adaptor

This AC adaptor operates on AC between 110 V and 240 V. But ≥ In the U.S.A. and Canada, the AC adaptor must be connected to a 120 V AC power

supply only.

≥ When connecting to an AC supply out side of th e U.S .A. or Canada , use a plu g ada ptor to

suit the AC outlet configuration.

≥ When connecting to a supply of greater than AC 125V, ensure the cord you use is suited

to the voltage of the AC supply and the rated current of the AC adaptor.

≥ Contact an electrical parts dis tributor for assistance in selecting a s uitable AC plug

adaptor or AC cord set.

The unit should be install ed near an accessible AC power outlet, with the power cord connected directly to i t. To completely disconnect power from the unit, unplug the power cord from the AC power outlet.

∫ Concerning the battery

Battery pack (Lithium ion battery pack)

≥ Use the specified unit to recharge the battery pack. ≥ Do not use the battery pack with equipment other than the specified unit. ≥ Do not get dirt, sand, liquids, or other foreign matter on the terminals. ≥ Do not touch the plug terminals (i and j) with metal objects. ≥ Do not disassemble, remodel, heat or throw into fire.

If any electrolyte should come int o con tac t wit h yo ur hands or cl othes, wash i t off th oroughly with water. If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes thoroughly with water, and then consult a doctor.

Warning

Risk of fire, explosion and burns. Do not disassemble, heat above 60 oC (140 oF) or incinerate.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

∫ Product Identification Marking

Product Location

High Definition Video Camera Battery holder AC adaptor Bottom

VQT3J15

U.S.A./CANADA CONSUMERS: ATTENTION:

A lithium ion/polymer battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery.

This product contains a CR Coin Cell Lithium Batte ry which contains Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardous waste/perchlorate

VQT3J15

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference.

1) Read these instructions.

2) Keep these inst ructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilat i on openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided fo r your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

11) Only use attachments/a c cessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damage d in any way, s uc h as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exp osed to rain or moisture, does not operate normally, or has been dropped.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience recept acles, and the point where they exit fr om the apparatus.

VQT3J15

Precautions

WARNING

CAUTION

USE & LOCATION

≥ TO AVOID SHOCK HAZARD ... Your

camera and power supply shoul d not be exposed to rain or moisture. Do not connect the power supply or operate your camera if it gets wet. Your camera has been designed for outdoor use, howeve r it is not designed to sust ain direct exposure to water, rain, sleet, snow, sand, dust, or a direct splashing fro m a pool or even a cup of coffee. This action could permanently damage the internal parts of your camera. Do not attempt to disassemble this unit. There are no user serviceable parts inside. Unplug your camera from the power supply before cleaning.

≥ AS WITH ANY SMALL OBJECT, SD

CARDS CAN BE SWALLOWED BY YOUNG CHILDREN. DO NOT ALLOW CHILDREN TO HANDLE THE SD CARD.

≥ DO NOT AIM YOUR CAMERA AT THE

SUN OR OTHER BRIGHT OBJECTS

≥ DO NOT EXPOSE YOUR CAMERA TO

EXTENDED HIGH TEMPERATURE ...

Such as, in direct sunlight, inside a closed car, ne xt to a heater, etc... This action could permanently damage the i nternal parts of your camera.

≥ AVOID SUDDEN CHANGES IN

TEMPERATURE ... If the unit is suddenly

moved from a cold place to a warm place, moisture may form on the SD card and inside the unit.

≥ DO NOT LEAVE YOUR CAMERA OR

THE POWER SUPPLY TURNED ON WHEN NOT IN USE.

≥ STORAGE OF YOUR CAMERA ... Store

and handle your camera in a manner tha t will not subject it to unnecessary movement (avoid shaking and striking). Y our camera contains a sensitive pick-up device which could be damaged by improper handling or storage.

CARE

≥ TO CLEAN YOUR CAMERA ... Do not

use strong or abrasive detergents when cleaning your camera body.

≥ TO PROTECT THE LENS ... Do not touch

the surface of the lens with your hand. Use a commercial camera lens solution and lens paper when cleaning the lens. Improper cleaning can scratch the lens coating.

≥ TO PROTECT THE FINISH OF YOUR

CAMERA ... Before handling your

camera, make sure your hands and face are free from any chemical prod ucts , su ch as suntan lotion, as it may damage the finish.

-If you see this symbol-

Information on Dispos a l in other Countries outside the European Union

This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.

VQT3J15

∫ About the recording format for

recording motion pictures

Y ou can s elect f rom either AVCHD or iFrame recording formats to record motion pictures using this unit. (l 61)

AVCHD:

Y ou can record high defi nition qua lity images with this format. It is suitab le for viewing on a large format TV or for saving to disc.

iFrame:

This is a recording format suitable for viewing and editing with a Mac (iMovie’11). When using the iMovie’11, you can import motion pictures in iFrame format quicker than with AVCHD. You can also make the file size of the imported motion picture smaller than when importing AVCHD. ≥ It is not compatible with motion picture

recorded in AVCHD format.

∫ Indemnity about recorded

content

Panasonic does not accept any responsibility for damages directly or indirectly due to any type of problems that result in loss of recording or edited content, and does not guarantee any cont ent if recording or editing does not work properly. Likewise, the above also applies in a case where any type of repair is made to the unit (including any other non-built-in memory/ HDD related component).

∫ Handling of built-in memory

[HDC-TM80]

This unit is equipped with the built-in memory. When using this component, pay attention to the following points.

Back up data periodically.

The built-in memory is temporary storag e. In order to avoid erasing dat a due to static electricity, electromagnetic waves, breakage, and fa ilures, b ack up the da ta t o a PC or DVD disc. (l 100, 110 ) ≥ Access lamp [ACCESS] (l 18)

illuminates while the SD card or built-in memory is being accessed (initialization,

VQT3J15

recording, playback, de leting etc.). Do not perform the following ope rati ons whe n th e lamp illuminates. It may damage the builtin memory or cause a malfunction in the unit.

jTurn the unit off (remove the batt e ry ) jInsert and remove the USB cable jExpose th e un i t to vibrations or sho c k

≥ About disposing of or giving a way this unit .

(l 135)

∫ Handling of HDD [HDC-HS80]

This unit is equipped with the built-in HDD. While the HDD is capable of storing a large amount of data, there are a few things to look out for. When using this component, pay attention to the following points.

Do not expose the HDD to vibrations and shocks.

Due to the environment and handling conditions, the HDD may be subject to partial damages or may not be able to read, record, and play back data. Do not expose the unit to vibrations or shock, and do not turn off the unit dur ing re cordin g or p layba ck.

If the unit is used in a plac e with loud sounds, such as a club or similar venue, the recording may stop due to sound vibrations. Recording data on an SD card is recommended in these pl aces.

Back up data periodically.

The HDD is temporary storage. In order to avoid erasing data due t o static electricity, electromagnetic waves, breakage, and failures, back up the data to a PC or DVD disc. (l 100, 110)

If the HDD experiences any abnormality, back up data immediately.

Failure in the HDD may produce continuous noise or choppy sound during recording or playing back. Continuous use will cause further deterioration, and may eventually disable the HDD. If these phenomena are observed, copy the data on the HDD to a PC, a DVD disc etc. immediately and contact consumer support. ( Once the HDD is out of order, data cannot be restored.

152, 153)

Operation may stop in hot or cold environments.

The unit is disabled in order to pr otect the HDD.

Do not use the unit in low atmospheric pressures.

The HDD may fail if it is used at altitudes of 3000 m (9800 feet) or higher above sea level.

Transportation

When the unit is trans porte d, turn of f the unit and be careful not to shake, drop, or cause impact to the unit.

Falling detection

[ ] is indicated on the screen when it detects a falling state (a weightless state). If the falling state is detected repeatedly, the unit may stop the recording or playb ac k operation in order to protect the HDD. ≥ HDD access lamp [ACCESS HDD] (l 19)

illuminates while the HDD is being accessed (initialization, rec ording, playback, deleting etc.). Do not perform the following operations when the lamp illuminates. It may damage the HDD or cause a malfunction in the unit.

jTurn the unit off (re m ove the battery ) jInsert and remove the USB cable jExpose the unit to vibrations or shock

≥ About disposing of or giving awa y this unit.

(l 135)

∫ Cards that you can use with

this unit

SD Memory Card, SDHC Memor y Card and SDXC Memory Card

≥ 4 GB or more Memory Cards that do not

have the SDHC logo or 48 GB or more Memory Cards that do not have t he SDXC logo are not based on SD Memory Card Specifications.

≥ Refer to page 24 for more details on SD

cards.

∫ For the purposes of this

owner’s manual

≥ SD Memory Card, SDHC Memory Card

and SDXC Memory Card are referred to as the “SD card”.

≥ Functions that can be used for Motion

Picture Recording Mode: Functions that can be used for Still Picture Recording Mode:

≥ Functions that can be used for Motion

Picture Playback Mode: Functions that can be used for Still Picture Playback Mode:

≥ Pages for reference are indicated by an

arrow, for example: l 00

This owner’s manual is designed for use with models , and . Pictures may be slightly different from the original. ≥ The illustrations used in this owner’s

manual show model , however, parts of the explanation refer to different models.

≥ Depending on the model, some

functions are not available.

≥ Features may vary, so please read

carefully.

≥ Not all models may be available

depending on the region of purc hase.

VQT3J15

Contents

Accessories.............................................12

Quick Guide....... ... .. ... ................. ... ... .. .....13

Advanced (Recording)

Preparation

Parts identificat ion and handling ..... ... ..17

Power supply.. ... ... ................................. ..20

Inserting/removing the battery........... 20

Charging the battery ......................... 21

Charging and reco rdi n g tim e.... ... ...... 22

Recording to a card ................................24

Cards that you can use with

this unit.............. ... ... ... ................. .. ... . 24

Inserting/removing an SD card.......... 25

Turning the unit on/off............................26

Turning the unit on and off with the

power button ..................................... 26

Turning the unit on and off with the

LCD monitor...................................... 26

Selecting a mode ....................................27

How to use the touch screen.................27

About the Touch Menu.. .. ................. . 28

Setting date and time..............................29

Basic

Before recording.....................................30

Selecting a media to record

[HDC-TM80/HDC-HS80] ..........................31

Recording motion pictures ....................32

Recording still pictures..........................34

Recording still pictures in

Motion Picture Recording Mode........ 35

Intelligent Auto Mode .............................36

Motion picture/Still picture playback ....38

Using the menu scre e n ................ ..........41

Using the Setup M enu .... ... .. ...................42

Zoom in/out function..............................49

Extra Optical Zoom ...... ... ... ............... 49

Image Stabilizer Function...................... 50

Recording with the Touch function.......51

Touch function icons ......................... 51

Recording functions of

operation icons .................... ................... 54

Operation icons................................. 54

Recording functions of menus.............. 60

Manual recording.................................... 72

White balance ................................... 73

Manual shutter speed/

iris adjustment................................... 74

Manual focus adju stme n t.................. 75

Advanced (Playback)

Playback Operatio ns....... ................. ......76

Motion picture playback us ing

operation icon ................. ... ............... 76

Creating still picture from

motion picture ................................... 77

Highlight & Time frame index............ 78

Repeat playba ck .......... ... ... ............... 78

Resuming the previous playback...... 79

Zooming in on a still picture during

playback (Playbac k zoom )................ 79

Various playback function s ........ ... ... .....80

Playing back motion pictures/

still pictures by date .......................... 80

Highlight Playback ............................ 81

Changing the playback settings and

playing back the slide show.............. 83

Deleting scene s/ stil l p ic t ure s ................ 85

Dividing a scene (AVCHD)................ 86

Dividing a scene to partially delete

(iFrame) .... ........................................ 87

Deleting personal information........... 88

Protecting scenes/still pictures ......... 88

DPOF setting.................. ... ... ... ................ 89

Relay scene combining

[HDC-TM80].............................................90

VQT3J15

Watching Video/Pictures on your TV....92

Connecting with a HDMI mini

cable ................................................. 95

Connecting with the AV multi

cable ................................................. 95

Playback using VIERALink

™

................96

Copy/Dubbing

Copying between SD card and Built-in Memory/HDD

[HDC-TM80/HDC-HS80] ..........................98

Connecting a DVD burner to copy to/

play back a disc........................... .........100

Preparing for copying/

playing back .................................... 100

Copying to discs.............................. 102

Playing back the copied disc........... 104

Managing the copie d disc ............... 105

Dubbing with a Blu-ray disc recorder,

video, etc. . ... ..........................................106

With a PC

What you can do with a PC ..................110

End User License Agreement......... 112

Operating environment ........................ 113

Installation ............................................. 116

Connecting to a PC............................... 118

About the PC displa y .... ................ .. 120

Starting HD Writer AE 3.0.. ................ ... 121

Reading the operating instructions

of the software applica tio n s............. 121

If using Mac ...........................................122

Others

Indications............................................. 123

Messages ..............................................126

About recovery................................ 127

Troubleshooting ...................................128

Cautions for use ...................................134

About copyright....................................140

Recording modes/approximate

recordable time .....................................141

Approximate number of recordable

pictures..................................................142

Specifications ....................................... 143

Optional accessories ...........................148

Accessory Order Form (For USA and Puerto Rico

Customers) ..................................... 150

Limited Warranty (ONL Y FOR U.S.A.

AND PUERTO RICO).............................151

Warranty

(For Canadian Cust o me rs ) .. ... ... ........... 153

Index ...................................................... 154

Spanish Quick Use Guide/

Guía española para el uso rápido ....... 156

PreparationBasicAdvanced

(Recording)

(Playback)

Copy/DubbingWith a PCOthers Advanced

VQT3J15

Accessories

Check the accessories before using this unit. Keep the accessories out of reach of children to prevent swallowing. Product numbers correc t as of Dec. 2010. These may be subject to change.

Battery pack

VW-VBK180

AC adaptor

VSK0711

AC cable

K2CA2CA00025

AV multi cable

K1HY12YY0008

USB cable

K1HA05AD0007

Stylus pen

VGQ0C14

≥ This is used for operations that are hard to

operate with your fingers or performing detailed operation s wit h the touch screen operation. (l 27, 48)

CD-ROM

Software

VQT3J15

Quick Guide















∫ Inserting the battery

Install the battery by inserting it in the direction shown in the figure.

A Insert the battery until it clicks and locks.

∫ Charging the battery

A DC input terminal

1 Connect the AC adaptor to the DC inp ut

terminal.

2 Connect the AC cable to the AC

adaptor, then the AC outlet.

≥ The status indicator will flash red at an

interval of 2 seconds, indicating that charging has begun. It will turn off when the charging is completed.

∫ Inserting/removing an SD card

Access lamp [ACCESS] A

≥ When this unit is accessing the SD

card or built-in memory, the access lamp lights up.

≥ Check that the access lamp has gone off.

1) Open the SD card cover and insert (remove) the SD card into (from) the card slot B.

≥ Face the label side C in the direction

shown in the illustration and press it straight in as far as it will go.

≥ Press the center of the SD card and then

pull it straight out.

2) Securely close the SD card cover.

≥ Securely close it until it clicks.

VQT3J15

∫ Turning the unit on/off





Turning the unit on and off with the power button

Open the LCD monitor and press the power button to turn on the unit.

A The status indicator lights on. ≥ To turn off the unit, hold down the power

button until the status indicator goes off.

Turning the unit on and off with the LCD monitor

Opening the LCD monitor turns on the unit. Closing the LCD monitor turns off the unit.

To turn on the unit

A The status indicator lights on.

To turn off the unit

∫ Selecting a mode

Operate the mode switch to change the mode to , or .

Motion Picture Recording Mode (l 32)

Still Picture Recording Mode (l 34)

Playback Mode (l 38, 76)

∫ How to use the touch screen

You can operate by directly touching the LCD monitor (touch screen) with your finger. It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with your fingers.

Touch

T ouch and release t he touch scr een to select icon or pictur e.

B The status indicator goes off.

VQT3J15

Slide while touching

Move your finger while pr essing on t he touch screen.

Touch Menu

Touch to display the Touch Menu. Touch (left side)/ (rig ht s ide) of on the Touch Menu to switch the operation icons.

A Touch Menu

∫ Recording motion pictures

1) Change the mode to .

2) Open the LCD monitor.

3) Press the recor ding start/stop button to start recording.



∫ Language selection

1) Touch [MENU], then touch [SETUP] # [LANGUAGE].

2) Touch desired language.

∫ Selecting a media to record

[HDC-TM80/HDC-HS80]

1) Change the mode to or .

2) Select the menu.

: [MEDIA SELECT]

3) Touch the media to record motion pictures or still pictures.

≥ Touch [VIDEO/SD C A R D] or [PICTURE/

SD CARD] to record to the SD card.

Touch [VIDEO/Built-inMemory] or [PICTURE/Built-inMemory] to record to the built-in memory.

Touch [VIDEO/HDD] or [PICTURE/HDD] to record to the HDD.

≥ The media is selected separately to

motion pictures or still pictures is highlighted in yellow .

4) Touch [ENTER].

A When you begin recording, ; changes

to ¥.

∫ Recording still pictures

1) Change the mode to .

2) Open the LCD monitor.

3) Press the button fully to take the picture.

VQT3J15

∫ Motion picture/Still picture







0h01m30s

playback

1) Change the mode to .

2) Touch the play mode select icon A.

ALL

3) Select the [VIDEO/PICTURE] you wish to play back.

Select the [MEDIA ] and [VIDEO/ PICTURE] you wish to play back.

≥ Touc h [ENTER].

4) Touch the scene or the still pictur e to be played back.

B is displayed when [AVCHD] is

touched or is displayed when [iFrame] is touched in step 3.

≥ To display the next (previous) page:

jSlide the thumbnail display upward

(downward) while touching it.

jSwitch the Touch Menu, and then

touch (up) / (down) on the thumbnail scroll lever.

5) Select the playback operation by touching the operation icon.

ALL

0h01m30s

≥ Operation icons and screen display will

disappear when no function is performed for a specific period of time. To display them again, touch the screen.

(Motion picture playback)

1/;: Playback/Pause 6: Rewind playback 5: Fast forward playback ∫: Stops the playback and shows

the thumbnails.

(Still picture pl ayback) 1/;: Slide show (playback of the still

pictures in numerical order) start/ pause.

2;: Plays back the previous picture. ;1: Plays back the next picture. ∫: Stops the playback and shows

the thumbnails.

C Operation icon

VQT3J15

Preparation

Parts identification and handling

1 Speaker 2 USB terminal [ ] (l 101, 106, 118)

AV MULTI

867

3 Intelligent auto/Manual button

3 4 5

[iA/MANUAL] (l 36, 72)

4 Optical image stabilizer button

[ O.I.S.] (l 50) 5 Power button [ ] (l 26) 6 HDMI mini connector [HDMI]

(l 92, 96) 7 AV multi connector (l 92, 109)

≥ Use the AV multi cable (only the supplied

cable).

8 Battery release lever [BATT] (l 20)

9 Lens cover closing switch

The lens cover will o pen automatically when set to Motion Picture Recording Mode or Still Picture Recording Mode. (l 27) When not using the unit, close the lens cover to protect the lens.

≥ Lens cover does not close automatically. ≥ Slide the Lens cover closing switch to

close the cover.

11 12

10 Lens cover 11 LED light

≥ It can be used as a Video light or Photo

light. (l 57, 71)

12 Lens 13 Internal stereo microphones

VQT3J15

14 Mode switch (l 27)

15 16

1817



15 Status indicator (l 26) 16 Recording start/stop button (l 32) 17 LCD monitor (Touch screen) (l 27)

≥ It can open up to 90o.

≥ It can rotate up to 180o A towards the lens

or 90o B towards the opposite direction.

Due to limitations in LCD production technology , t here may be some ti ny bright or dark spots on th e L CD monit or scr een. However, t his is not a malfunction and does not affect the recorded picture.

18 Battery holder (l 20)

19 Tripod receptacle

≥ If you attach a tripod which has 5.5 mm

(0.22 q) screw or larger, it may damage this unit.

20 SD card cover (l 25) 21 Access lamp [ACCESS] (l 25) 22 Card slot (l 25)

VQT3J15

2423







23 Photoshot button [ ] (l 34) 24 Zoom lever [W/T] (In Motion Picture

Recording Mode or Still Picture

Recording Mode) (l 49)

Thumbnail display switch [ / ]/

Vo lume lever [sVOLr] (In Playback

Mode) (l 39) 25 Grip belt

Adjust the length o f the grip bel t so tha t it fits your hand.

1 Flip the belt. 2 Adjust the length. 3 Replace the belt.

26 DC input terminal [DC IN] (l 21)

≥ Do not use any other AC adaptors except

the supplied one.

27 HDD access lamp [ACCESS HDD] 28 DC input terminal [DC IN] (l 21)

≥ Do not use any other AC adaptors except

the supplied one.

VQT3J15

Preparation

Removing the battery

Be sure to hold down the power button until the sta tus indicator goes off. Then remove the battery while supporting the unit to prevent it from dropping.

Move the battery release lever in the direction indicated by the arrow and remove the battery when unlocked.

ャモヵヵ

A Insert the battery until it

clicks and locks.

Power supply

∫ About batteries that you can use with this unit

The battery that can be used with this unit is VW-VBK180/VW-VBK360. ≥ The unit has a function for distinguishing batteries which can be used safely. The

dedicated battery (VW-VBK180/VW-VBK360) supports this function. The only batteries suitable for use with this unit are genuine Panasonic products and batteries manufactured by other companies and certified by Panasonic. (Batteries which do not support this function cannot be used). Panasonic cannot in any way guarantee the quality, performance or safety of batteries which have been manufactured by other companies and are not genuine Panasonic products.

It has been found that counterfeit battery packs which look very similar to the genuine product are made available to purchase in some markets. Some of these battery packs are not adequately protected with internal protection to meet the requirements of appropriate safety standards. There is a possibility that these battery packs may lead to fire or explosion. Please be advised that we are not liable for any ac cident or failure occurring as a result of use of a counterfeit battery pack. To ensure that safe products are used we would recommend that a genuine Panasonic battery pack is used.

Inserting/removing the battery

≥ Press the power button to turn off the unit. (l 26)

Install the battery by inserting it in the direction shown in the figure.

VQT3J15

Charging the battery





When this unit is purchased, the battery is not charged. Charge the battery fully before using this unit for the first time.

Important:

≥ Use the supplied AC adaptor. Do not use the AC adaptor of another device. ≥ Do not use the AC cable with any other equipment as it is designed only for this unit.

Also, do not use the AC cable from other equipment with this unit.

≥ The battery can also be charged using a battery charger (VW-BC10PP; optional). ≥ The battery will not be charged if the unit is turned on. ≥ It is recommended to charge the battery in a temperatu re between 10 oC to 30 oC

(50 °F to 86 °F). (The battery temperature should also be the same.)

A DC input terminal

≥ Insert the plugs as far as they will go.

1 Connect the AC adaptor to the DC input terminal. 2 Connect the AC cable to the AC adaptor, then the AC outlet.

≥

The status indicator will flash red at an interval of 2 seconds, indicating that charging has begun. It will turn off when the charging is completed.

∫ Connecting to the AC outlet

If you turn on the unit while connec ting the AC adaptor , you can use the unit with power supplied from the outlet.

≥ If the status indicator flashes at a particularly fast or slow rate, refer to page 137. ≥ We recommend using Panasonic batteries (l 12, 22, 23, 148). ≥ If you use other batteries, we cannot guarantee the quality of this product. ≥ Do not heat or expose to flame. ≥ Do not leave the battery(ies) in an automobile ex posed to direct sunlight for a long period

of time with doors and windows closed.

VQT3J15

Charging and recording time

∫ Charging/Recording time

≥ Temperature: 25 oC (77 oF)/humidity: 60%RH (When using AC adaptor)

HDC-SD80

Battery model number

[Voltage/Capacity

(minimum)]

Supplied ba ttery/

VW-VBK180 (optional)

[3.6 V/1790 mAh]

VW-VBK360 (optional)

[3.6 V/3580 mAh]

Battery model number

[Voltage/Capacity

(minimum)]

Supplied ba ttery/

VW-VBK180 (optional)

[3.6 V/1790 mAh]

VW-VBK360 (optional)

[3.6 V/3580 mAh]

Charging

time

2h25min

4h20min

Charging

time

2h25min

4h20min

Recording

mode

[HA], [HG] 1 h 50 min

[HX], [HE] 1h55min

[iFrame] 2h 1h

[HA], [HG],

[HX], [HE]

[iFrame] 3h55min 2h

HDC-TM80

Recording

mode

[HA], [HG] 1 h 50 min

[HX], [HE] 1h55min

[iFrame] 2h 1h

[HA], [HG],

[HX], [HE]

[iFrame] 3h55min 2h

Maximum

continuous

recordable time

3h45min 1h55min

Maximum

continuous

recordable time

3h45min 1h55min

Actual

recordable

time

55 min

Actual

recordable

time

55 min

VQT3J15

HDC-HS80

Battery model

number

[Voltag e/Cap acity

(minimum)]

Supplied battery/

VW-VBK180

(optional)

[3.6 V/1790 mAh]

VW-VBK360

(optional)

[3.6 V/3580 mAh]

≥ These times are approximations. ≥ The indicated charging time is f or when the batter y has been disc harged compl etely.

Charging time and recordable time vary depending on the usage conditions such as high/low temperature.

≥ The actual recordable time refers to the recorda ble t ime when repeat ed ly st art ing/s toppin g

recording, turning the unit on/off, moving the zoom lever etc.

≥ The batteries heat up after use or charging. This is not a malfunction.

Charging

time

2h25min

4h20min

Recording

destination

HDD

Recording

mode

[HA], [HG],

[HX], [HE]

[iFrame] 1h45min

[HA], [HG],

[HX], [HE]

[iFrame] 1h45min 55min

[HA], [HG],

[HX], [HE]

[iFrame] 3h25min

[HA], [HG],

[HX], [HE]

[iFrame] 3h35min

Maximum continuous recordable

time

1h35min

1h40min 50min

3h15min

3h25min

Actual

recordable

time

50 min

1h40min

1h45min

1h50min

Battery capacit y indica tion

≥ The display changes as the battery capacity reduces.

####

If there is less than 3 minutes rema ining, then will become red. If the battery discharges, then will flash.

≥ The remaining battery capacity is displayed when using the Panasonic battery that you

can use for this unit. The actual time can vary depending on your actual use.

≥ When using the AC adaptor or batteries made by other companies, the remaining

battery capacity will not be shown.

VQT3J15

Preparation

Recording to a card

The unit can record still pictures or motion pictures to an SD card, built-in memory or HDD. To record to an SD card, read the following.

This unit (an SDXC compatible device) is compatible with SD Memory Cards, SDHC Memory Cards and SDXC Memory Cards. When using an SDHC memory card/SDXC memory card with other equipment, ch eck the equipment is compatible with these memory cards.

Cards that you can use with this unit

Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for motion picture record ing.

Card type Capacity Motion picture recording

8MB/16MB/

Memory

Card

SDHC

Memory

Card

SDXC

Memory

Card

* SD Speed Class Rating is the speed

standard regarding continuous writing. Check via the label on the card, etc.

64 MB/128 MB/

4GB/6GB/8GB/

32 MB

256 MB

512MB/1GB/

12 GB/16 GB/

24 GB/32 GB

48 GB/64 GB

Cannot be used.

Cannot be guaranteed in operation.

2GB

Can be used. Can be used.

e.g.:

Still picture

recording

Cannot be guaranteed in operation.

≥

Please confirm the latest information about SD Memory Cards/SDHC Memory Cards/SDXC Memory Cards that can be used for motion picture recording on the following website.

http://panasonic.jp/support/global/cs/e_cam

(This website is in English only.) ≥ 4 GB or more Memory Cards that do not have the SDHC logo or 48 GB

or more Memory Cards that do not have the SDXC logo are not based on SD Memory Card Specifications.

≥ When the write-protect switch A on SD card is locked, no recording,

deletion or editing will be possible on th e card.

≥ Keep the Memory Card out of reach of children to prevent swallowing.

VQT3J15

Inserting/removing an SD card







When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. ( of the recorded data is deleted. Once the data is deleted, it cannot be restored.

Caution: Check that the access lamp has gone off.

46, 47) When the SD card is formatted, all

Access lamp [ACCESS] A

≥ When this unit is accessing the SD

card or built-in memory, the access lamp lights up.

1 Open the SD card cover and

insert (remove) the SD card into (from) the card slot B.

≥ Face the label side C in the direction

shown in the illustration and press it straight in as far as it will go.

≥ Press the center of the SD card and then

pull it straight out.

2 Securely close the SD card

cover.

≥ Securely close it until it clicks.

≥ Do not touch the terminals on the back of

the SD card.

≥ Do not apply strong shocks, bend, or drop

the SD card.

≥ Electrical noise, static electricity or the

failure of this unit or the SD card may damage or erase the dat a st ored on the SD card.

≥ When the card access lam p is lit, do not:

jRemove the SD card jTurn the unit off jInsert and remove the USB cable jExpose the unit to vibrations or shock

Performing the above while the lamp is on may result in damage to data/SD card or this unit.

≥ Do not expose the terminals of the SD

card to water, dirt or dust.

≥ Do not place SD cards in the following

areas:

jIn direct sunlight jIn very dusty or humid areas jNear a hea ter jLocations susceptible to significant

difference in temperat ure (cond ensation can occur.)

jWhere static electricity or

electromagnetic waves occur

≥ To protect SD cards, return them to their

cases when you are not using th em.

≥ About disposing of or giving away the SD

card. (l 138)

VQT3J15

Preparation

To turn off the unit

Hold down the power button until the status indicator goes off.





Turning the unit on/off

You can turn the unit on and off using the power button or by opening and closing the LCD monitor.

A clicking sound is heard when the unit is shaken.

≥ This is the sound of the lens moving an d i s not a defect.

This sound will no longer be heard when the unit is turned on and change the mode to

or .

Turning the unit on and off with the power button

Open the LCD monitor and press the power button to turn on the unit.

A The status indicator lights on.

Turning the unit on and off with the LCD monitor

Unit is turned on when the LCD monitor is opened, and unit is turned off when it is closed.

During normal use, opening and closing of the LCD monitor can be conveniently used to turn the unit on/off.

∫ To turn on the unit

∫ To turn off the unit

A The status indicator lights on.

≥ The unit will not turn off while recording motion pictures even if the LCD monitor is closed. ≥ In the following cases, opening t he L CD monit or does not t urn on the un it. P ress t he power

button to turn on the unit.

jWhen the un i t i s originally purchased jWhen you have turned off the unit using the power button

VQT3J15

B The status indicator goes off.

Preparation

Selecting a mode

Change the mode to recording or pl ayback.

Operate the mode switch to change the mode to , or .

Motion Picture Recording Mode (l 32) Still Picture Re co rding Mode (l 34) Playback Mode (l 38, 76)

Preparation

How to use the touch screen

You can operate by directly touching the LCD monitor (touch screen) with your finger. It is easier to use the stylus pen (supplied) for detaile d operati on or if it is hard to oper ate with your fingers.

∫ Touch

Touch and release the touch screen to s elect icon or picture.

≥ Touch the center of the icon. ≥ Touc hing the touch screen will not operate while you

are touching another part of the touch screen.

∫ Slide while touching

Move your finger while pressing on the touch screen.

VQT3J15

∫ About the operation icons

///: These icons are used to switch the menu and thumbnail display page, fo r item selection and setting etc.

: Touch to return to the previous screen such as when setting menus.

About the Touch Menu

Touch (left side)/ (right side) of on the Touch Menu to switch the operat ion icons.

Touch (left side)/ (right side) of on the Touch Menu.

≥ It is also possible to swit ch the operation icons by sliding the Touch Menu right or left while

touching it.

A Touch Menu

Recording Mode Playback Mode



FOCUS

SHTR

IRIS



B Touch these icons to switch pages upward or downward. C Displayed only during the Manual Mode.

∫ To display the Touch Menu

The Touch Menu will disappear when n o function is performed for a specific period of time during Recording mode. To display it again, touch .

VQT3J15

ALL

≥ Do not touch on the LCD monitor with hard pointed tips, such as ball point pens.

≥ Perform the touch screen c alibration when the touch is not recognized or wrong location is

recognized. (l 48)

Preparation

Setting date and time

When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and perform steps 2 to 3 below to set the date and time.

1 Select the menu. (l 41)

: [SETUP] # [CLOCK SET]

Touch the date or time to be set, then set the desired value using / .

A Displaying the World time setting (l 42):

[HOME]/ [DESTINATION]

≥ The year can be set between 2000 and 2039. ≥ The 12-hour system is used to display the time.

3 Touch [ENTER].

≥ A message prompting for World time setting may be

displayed. Perform the World time setting by touching the screen. (l 42)

≥ Touch [EXIT] to complete the setting.

≥ The date and time function is driven by a built-in lithium battery. ≥ When this unit is purchased, the clock is set. If the time display becomes [- -], the built-in

lithium battery needs to be cha rged. To recharge the built-in lithium battery, connect the AC adaptor or attac h the b at ter y t o this unit . Leav e the uni t as it is fo r ap pro x. 2 4hours and the battery will maintain the date and time for approx. 4 months. (The battery is still being recharged even if the unit is off.)

VQT3J15

Basic





Before recording

∫ Basic cam era positi oning

1 Hold the unit with both hands. 2 Put your hand through the grip belt. 3 It is convenient to use the Recording button icon A when holding the unit at waist level.

≥ When recording, make sure your footing is stab le and there is no danger of colliding with

another person or objec t.

≥ When you are outdoors, record pictures with the sunlight behind you. If the subject is

backlit, it will become dark in the recording.

≥ Keep your arms near your body and separate your legs for better balance. ≥ Do not cover the microphones with your hand etc.

∫ Basic motion picture recording

≥ The unit should normally be held steady when recording. ≥ If you move the unit when recording, do so slowly, maintaining a constant speed. ≥ The zoom operation is use ful f or reco rding sub jec ts yo u ca nnot get cl ose to, bu t overu se o f

zoom in and zoom out can make the resulting motion picture less enjoyable to watch.

∫ Recording Yourself

Rotate the LCD monitor towards the lens side.

≥ The image is horizontally flipped as if you see a mirror

image. (However the image recorded is t he same as a normal recording.)

≥ Only some indications will appear on the screen. When

appears, return the direction of the LCD monitor to normal position and check the warning/alarm indication. (l 126)

VQT3J15

+ 130 hidden pages