Panasonic GP-US502 User Manual
Specifications and Main Features
- GP-US502 is the model number.
- F1.6 marks the modification of the image sensor, which is a micro prism system.
- The model uses 3 interline transfer which works with super high sensitivity and uses 1/2’’ CCD.
- The 768 by 494 pixels form the 2D raster: the horizontal outline counts 768 pixels, while the vertical 494.
- This technology has a standard of 525 lines, 60 fields, and 30 frames.
- The system is synchronized and is applicable for both internal scoped and external, which can be switched using: Gen-Lock.
- The standard set internally is the NTSC format.
- An external input to the device can supports VBS, VS, HD, and VD.
- With VBS setups, the SC Phase for Gen-Lock setup can also be adjusted and is set to run undetermined in terms of angles.
- With adjusted VS, the H Phase for Gen-Lock can also be set.
- I/O configuration supports and includes:
- Video Output from BNC connectors (NTSC) x2, the rate is 1.0Vp-p and total impedance of 750ohms.
- S-VIDEO (equipped with an output of 1) that uses a connector and works with Y, sunlight, and levels C and 286VP, that further has around 75 resistyes.
- D-sub on the pin S, which works with HDMI levels of R/G/B, accounting for each of them being 0.7Vp and 75ohms, or collectively cites 4Vp-p for SYCN and 0.3Vp-p.
- Usage of the lens which requires illumination of 2000 Lux at F8.0, 3200 was K.
- Usage of the lens with a minimum illumination of 0.9FC which is at F2.8 and uses +18dB and has a level 30IRE.
- Taking into account an aperture and gamma the signal to noise ratio usually is registered around 56dB.
- The Y signal at the center to horizontal resolution scales to 700 lines.
- In terms of White balance ATW (Automated tracing White Balance Control), AWC (Automated White Balance Control) and M do work effectively.
- The model is equipped to work with automatic black balance and also provides a manual control to it.
- Color Bar: Integrated Full color bar along with 7.5% configuration
- Electronic Shutter: AUTO: Adjustable in the range of 1/60 - 1/10,000sec; STEP: Choose from 1/60(OFF), 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000 and 1/10000s
- Gain Selection: Agc And Gain Up (Has Options)
- Power Supply: 12V Dc
- Power Consumption: 8.4W
- Ambient Operating Temperature: 0C to +45C (32F to +113F)
- Ambient Operating Humidity: 30 ~ 90%
- Dimensions:
- Camera Head: 1-5/16” (w) X 1-11/16” (H) X 2” (D)
- Ccu: 8-1/8” (W) X 1-11/16” (H) X 9-1/2” (D)
- Weights:
- Camera Head: 0.24 Ibs (110g)
- Ccu: 3.74 Ibs (1.7Kg)
Frequently Asked Questions
- What is the resolution of the GP-US502 camera?
The camera gives 700 lines of the horizontal resolution.
- What is the minimum illumination required for the camera?
The minimum illumination of the scene is 0.9 footcandle (9 Lux) at F2.8 with +18dB gain.
- What kinds of white balance does the camera support?
The camera employs part olan: Automatic Tracing White Balance (ATW) , Automatic White Balance Control (AWC) And also Manual White Balance Control.
- Which power supply is required for the camera?
The camera requires a 12V DC power supply unit.
- In this camera what is the mode of electronic shutter and how does it work?
The electronic shutter can be operated in either AUTO or STEP modes, which may be set between 1/60 and 1/10,000 seconds or selected fixed shutter speeds.
- Does the camera support a color bar generator option?
The answer is affirmative, as it has an inbuilt full color bar generator integrated with the camera.
- What is the maximum weight limit for the camera head and CCU?
The weight of the camera head is 0.24 Ibs (110g) and that of the CCU is 3.74 Ibs (1.7Kg).
User Manual
Loading...