Panasonic GA-AS4Ｔ Specification
Model
Name
Model
No.
GA-AS4Ｔ
Product Specification
PN25041-TH
401-25041-TH-SP02
Page 1 of 7
1. Summary
GA-AS4T has six ports which are 10BASE-T/100BASE-TX/1000BASE-T compatible ports.
2. Feature
（1） Ports 1 to 6 (twisted pair ports) are 10BASE-T/100BASE-TX/1000BASE-T corresponding to auto-negotiation.
（2） All of the twisted pair ports are equipped with straight/cross cable automatic detection functions.
Straight cables can be used to make interconnections without distinctions between the terminals and network devices having to be made.
(The factory default is for ports 1 to 4 to have MDI-X be fixed.)
（3） If equipped with IEEE802.3az (LPI) compatible Energy Efficient Ethernet functions (hereinafter EEE), and if data is transmitted
when linked up, the energy efficient state will be moved to, whereas each port can suppress power consumption.
（4） Automatically detects the connection states via the equipped energy efficiency mode,
and suppresses power consumption to required levels.
（5） VLAN function allows free grouping of up to 256 VLANs.
（6） The IEEE802.1p compatible QoS function is supported.
（7） Has an Internet Mansion function, which ensures security between each door.
（8） The Switching Hub settings can be configured via a web browser. Since the IP address is not set when the Switching Hub is shipped
from the factory, it can be changed by connecting the computer and the Switching Hub which have the ZEQUO assist Plus that is on
the CD-ROM installed on them with the twisted pair cables.
Date issued
Date revised
Jan. 6, 2020
Panasonic Life Solutions Networks Co., Ltd.
Oct. 1, 2020
Model
Name
Model
No.
GA-AS4Ｔ
PN25041-TH
3. Rated/Environmental Conditions
3－1. Power supply
3－2. Power consumption
3－3. Operating environment
3－4. Storage environment Temperature: -20 - 70℃
3－5. EMC compliance
3－6. Safety compliance IEC 60950-1
4. Form
4－1. Form and materials/colors
4－2. Mass（Weight） 1,100g
401-25041-TH-SP02
Product Specification
Page 2 of 7
AC100-240V, 50/60Hz, 0.7A (with a built-in power supply)
Normally, Max.4.3W, Min.3.2W
Temperature: 0 - 50℃
Humidity: 20 - 80%RH （no condensation）
Humidity: 10 - 90%RH （no condensation）
CISPR 22 Class A, EN 55022 Class A, EN 55032 Class A
AS/NZS CISPR22 Class A
VCCI Class A
EN 61000-3-2, EN 61000-3-3
CISPR 24, EN 55024
IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5,
IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11
EN 60950-1
RoHS compliant3－7. Environment compliance
Dimensions ：44mm（Height）×210mm（Width）×130mm（Depth）
（Excluding protruding sections）
Case material ：SECC
Color : Main unit: Green 03, Front face: Green 03,
Face plate label: Green 02
5. Hardware Specifications
5－1. Interface
Twisted pair port 1-6 ：RJ45 connector ※1
Transmitting and receiving network system ：
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3ab 1000BASE-T
Energy Efficient Ethernet ：IEEE802.3az (LPI) ※2
Transmission speed ：10/100Mbps full/half duplex,
1000Mbps full duplex,
Compatible cable ：Twisted pair cable
（At least equivalent to EIA/TIA568 category 5e）
If there is Category 3 cable used in a
connection, the communication at a
speed of 10Mbps can not be established.
You must use category 5e or higher
crossover cable.
Maximum transmission distance ：100m
Auto-Negotiation ：Communication speed and full/half duplex
are automatically recognized.
The setting can be fixed to 10Mbps, 100Mbps,
1000Mbps and full duplex or half duplex.
※1 Automatically detects the connection states via the equipped Power Saving Mode,
and suppresses power consumption to required levels.
Factory default : Half
※2 Port 1-4 equipped with IEEE802.3az (LPI) compatible Energy Efficient Ethernet
functions(hereinafter EEE), and if data is transmitted when linked up, the energy
efficient state will be moved to, whereas each port can suppress power consumption.
Factory default : Enable
Date issued
Date revised
Jan. 6, 2020
Panasonic Life Solutions Networks Co., Ltd.
Oct. 1, 2020
Model
Name
Model
No.
GA-AS4Ｔ
PN25041-TH
5. Hardware Specifications
401-25041-TH-SP02
Product Specification
Page 3 of 7
5－2. Switching mode
5－3. LED display
Switching method ：Store and Forward
Switching capacity ：12.0Gbps
Packet transfer capability ：Non-blocking
Max 14,880pps/port（10Mbps）
Max 148,800pps/port（100Mbps）
Max 1,488,000pps/port（1000Mbps）
MAC Address table ：Max 8K entry/unit
Buffer memory ：512K Byte/unit
Flow control ：half-duplex Back pressure
full-duplex IEEE802.3x
Aging timeout ：10 to 1,000,000 sec.
Jumbo frame supported ：9KB
Transmittable frames ：EAP, BPDU
（1）POWER（Power）LED
Green Light ：Power is ON
Off ：Power is OFF
（2）STATUS (Status) LED
Green Light ： System is normally operating
Green Blink : After powering on, and the system startup is completed,
blinks for five minutes
Orange Light： System is starting up
Orange Blink： System is malfunctioning
（4） Port LED (Left)
LINK/ACT (ports 1-6) LED
Green Light : Link is established.
Green Blink : Data is being sent/received.
Off : No terminal is connected.
LED(Left)
5－4. Cascade connections
5－5. FAN
Port 1-6 corresponding to the Auto MDI / MDI-X
(Allowed change by the setting for the application)
The factory default is for ports 1 to 4 are fixed to be MDI-X.
Not installed
Date issued
Date revised
Jan. 6, 2020
Panasonic Life Solutions Networks Co., Ltd.
Oct. 1, 2020
Loading...