Panasonic FZ-VCBX111 Operating Instructions Manual
Operating Instructions
Nous vous remercions d’avoir acheté un produit
Panasonic.
Veuillez lire ce document attentivement avant
d’utiliser le produit et conservez-le dans un endroit
sûr pour pouvoir vous y reporter ultérieurement.
Instructions d’utilisation
Bedienungsanleitung
Vielen Dank, dass Sie sich für den Kauf dieses
Panasonic-Produkts entschieden haben.
Lesen Sie vor der Verwendung des Produkts dieses
Dokument sorgfältig und bewahren Sie es zum
späteren Nachschlagen an einem sicheren Ort auf.
Thank you for purchasing a Panasonic product.
Please read this document carefully before using
the product and keep this document in a safe place
for future reference.
取扱説明書
保証書付き（日本国内向け）
●取扱説明書をよくお読みのうえ、正しく安全にお 使 いくださ い 。
●ご使用前に「安全上のご注意」（34ページ）を必ずお読みください。
●保証書は「お買い上げ日・販売店名」などの記入を確かめ、
取扱説明書とともに大切に保管してください。
FRANÇAIS 日本語DEUTSCHENGLISH
4-Bay Battery Charger
Ladegerät für 4 Akkus
Baie de chargement pour 4 batteries
バッテリーチャージャー（4連式）
Model No.
FZ-VCBX111
PGQX1765YCJ1 C0914-3027Printed in Japan
For U.S.A.
Federal Communications Commission Radio Frequency
nterference Statement
I
Note:
R This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
– Consult the Panasonic Service Center or an experienced radio/TV technician
for help.
Warning:
R Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation.
Responsible party
anasonic Corporation of North America
P
Two Riverfront Plaza, Newark, NJ 07102, USA
Support contact: http://www.panasonic.com/contactinfo
2
For Europe
Declaration of Conformity (DoC)
"Hereby, Panasonic declares that this 4-Bay Battery Charger is
i
n compliance with the essential requirements and other
relevant provisions of EU Council Directives."
Authorised Representative:
P
anasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
Disposal of Old Equipment
Only for European Union and countries with recycling
systems
This symbol on the products, packaging, and/or accompanying
ocuments means that used electrical and electronic products must
d
not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please
take them to applicable collection points in accordance with your
national legislation.
By disposing of them correctly, you will help to save valuable
resources and prevent any potential negative effects on human
health and the environment. For more information about collection
and recycling, please contact your local municipality.
Penalties may be applicable for incorrect disposal of this waste, in
accordance with national legislation.
Energy Saving
F
or information about power consumption under EU Regulation (EC)
No.1275/2008, please refer to the following web site.
http://www.ptc.panasonic.eu/
3
For UK
A S A
Figure A Figure B
Fuse cover
For your safety, please read the following text carefully.
T
his appliance is supplied with a molded three pin mains plug for your safety and
convenience.
A 3 ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement fuse has
a rating of 3 ampere and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
f the plug contains a removable fuse cover you must ensure that it is refitted when
I
the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement cover is
obtained. A replacement fuse cover can be purchased from your local dealer.
If the fitted molded plug is unsuitable for the socket outlet in your home then the
fuse should be removed and the plug cut off and disposed of safely.
There is a danger of severe electrical shock if the cut off plug is inserted into any
13-ampere socket.
How to replace the fuse
The location of the fuse differs according to the type of AC mains plug (figures A
and B).
Confirm the AC mains plug fitted and follow the instructions below. Illustrations may
differ from actual AC mains plug.
Open the fuse cover with a screwdriver and replace the fuse and close or attach
the fuse cover.
or the BSI mark on the body of the fuse.
For Canada
F
OR USE WITH MODEL NO. : CF-AA5713A
4
India Only
eclaration of Conformity with the requirements of the E-Waste (Management)
D
Rules
The Product is in conformity with the requirements of the reduction of hazardous
substances of the E-Waste Rules.
The content of hazardous substance with the exemption of the applications listed in
SCHEDULE II of the E-waste Rules:
1. Lead (Pb) – not over 0.1 % by weight;
2. Cadmium (Cd) – not over 0.01 % by weight;
3. Mercury (Hg) – not over 0.1 % by weight;
4. Hexavalent chromium (Cr6+) – not over 0.1 % by weight;
5. Polybrominated biphenyls (PBBs) – not over 0.1 % by weight;
6. Polybrominated diphenyl ethers (PBDEs) – not over 0.1 % by weight.
For the purpose of recycling to facilitate effective utilization of
r
esources, please return this product to a nearby authorized
collection center, registered dismantler or recycler, or Panasonic
service center when disposing of this product.
Please see the Panasonic website for further information on
collection centers, etc. , or call the toll-free number below.
Website:
ttp://www.panasonic.com/in/corporate/sustainability/
h
panasonic-india-i-recycle-program.html
Service helpline: 1800 103 1333 or 1800 108 1333
5
Contents
Introduction page 6
Safety precautions page 7
Handling cautions page 9
Description of parts page 10
Charging a battery page 11
Troubleshooting page 12
Specifications page 13
Introduction
his product is designed for use with the Panasonic FZ-X1 and FZ-E1 series
T
(hereinafter referred to as "the unit").
Up to four batteries can be charged at the same time.
Compatible batteries (included with the unit and available as an accessory)
R FZ-VZSUX100J
Included accessories
R AC Adaptor (Model number CF-AA5713A) x 1
R AC Cord x 1
R Operating Instructions (this document) x 1
Note:
R Some illustrations are simplified to help your understanding and may look
different from the actual product.
6
Safety precautions
o not disassemble or modify this product.
R D
Short-circuit or overheating may result, which could lead to fire or electric shock.
R Do not insert foreign objects into this product.
This may cause the battery to short circuit or overheat, which may result in fire
or electric shock.
R Use only specified AC adaptors.
Use of unspecified AC adaptors may result in overheating, fire, or rupture.
R Use only specified batteries.
Use of unspecified batteries may result in electrolyte leakage, overheating, or
rupture.
R Stop using this product if any of the following occurs.
– This product emits smoke, unusual sound, or unusual smell
– Water or foreign object enters this product
– This product is damaged
– This product becomes unusually hot
Failure to do so may result in fire or electric shock. Disconnect this product from
the power supply, remove the battery, and then contact your technical support
representative for support or repair.
R Do not touch this product during lightning storms.
There is a remote chance of electric shock.
R Do not expose this product to water or other liquids.
Doing so may cause a short circuit, generation of heat, overheating, or rupture,
which may result in a fire, electric shocks, and/or injury.
R Clean dust and other debris on the AC plug regularly.
If dust or other debris accumulates on the plug, humidity, etc. may cause a
defect in the insulation, which may result in a fire.
R Pull the plug, and wipe it with a dry cloth. Pull the plug if this product is not
being used for a long period of time.
R Do not do anything that may damage the AC cord, the AC plug, or the AC
adaptor.
Do not damage or modify the cord, place it near hot tools, bend, twist, or pull it
forcefully, place heavy objects on it, or bundle it tightly.
Continuing to use a damaged cord may result in fire, short circuit, or electric
shock.
R Do not pull or insert the AC plug if your hands are wet.
Electric shock may result.
R Do not connect the AC adaptor to a power source other than a standard
household AC outlet.
Otherwise, a fire due to overheating may result. Connecting to a DC/AC
converter (inverter) may damage the AC adaptor. On an airplane, only connect
the AC adaptor/charger to an AC outlet specifically approved for such use.
7
R I
nsert the AC plug completely.
If the plug is not inserted completely, fire due to overheating or electric shock
may result.
R Do not use a damaged plug or loose AC outlet.
R When using this product, do not expose your skin to the surface of the AC
adaptor for a prolonged period.
Generated heat can cause low-temperature burns.
R Do not place this product on an unstable surface.
This product may drop, resulting in injury.
R Do not leave this product in extremely high temperature environments for
an extended period.
Leaving this product where it will be exposed to extremely high temperatures,
such as near fire or in direct sunlight, may deform this product or cause damage
or malfunction to its internal components. Using this product in these conditions
may cause short circuit, insulation defects, etc., which may in turn cause fire or
electric shock.
R Do not leave this product in areas with a high concentration of moisture,
steam, dust, oily vapors, etc.
Foreign material that enters this product may cause fire or electric shock.
R Hold the plug when unplugging the AC plug.
Pulling on the cord may damage the cord, resulting in a fire or electric shock.
R Do not move this product while the AC plug is connected.
The AC cord may be damaged, resulting in fire or electric shock.
R If the AC cord is damaged, unplug the AC plug immediately.
R Do not subject the AC adaptor to any strong impact.
Using the AC adaptor after a strong impact such as being dropped may result in
electric shock, short circuit, or fire.
R Contact your technical support representative for support or repair.
8
Handling cautions
bey the following to ensure proper use and operation of this product.
O
Operating environment
R The charging times will vary depending on the operating environment.
R Using this product continuously in a hot environment will shorten the product life.
Avoid use in these types of environments.
R Place this product on a flat, stable surface.
R Do not place this product on its sides or upside down.
Drop impacts and damage
R This product is a delicate apparatus. Be sure to handle it with care.
R Do not drop this product or subject it to impacts.
Cleaning
R Always disconnect the AC adaptor before cleaning this product.
R Clean this product with a soft, dry cloth.
R Do not use thinner, benzene, wax, petroleum-based liquids, soap, powdered
cleansers, hot water, chemical cleaning cloths, etc.
R If dust or oil has accumulated on the battery charging terminals, battery charging
may not be possible. Clean it with a soft, dry cloth.
R Be careful not to bend the battery charging terminals.
Miscellaneous
R This product is only compatible with the batteries listed on page 6. Do not insert
any other model or type of battery.
R Do not touch the battery charging terminals.
R Do not allow conductive metallic materials such as coins or paper clips to touch
the battery charging terminals.
R The AC adaptor is used as the main disconnect device. Ensure that the AC
outlet is installed near the product and is easily accessible.
9
Description of parts
C
A
B
A Indicators
ndicates the charging status of the battery inserted in the battery charging
I
slot.
Orange, lit: Battery is charging
Green, lit: Battery charging is complete
Off: No battery is inserted
B DC input jack
llows you to connect an AC adaptor to this product.
A
C Battery charging terminals
upplies power to the battery when it is charging.
S
Explanation of graphical symbol on nameplate
: Alternating current
: Direct current
10
Charging a battery
C
A
B
onnect the AC adaptor.
1 C
R Connect the AC adaptor (A) and the AC cord (B).
2 Insert the terminal end of the battery into the battery charging slot.
R Insert the battery (C) so that the battery label and the yellow tab are facing
up, and the terminals on the battery line up with the terminals inside the
battery charging slot.
R The AC cord may vary depending on the country.
3 Lower the battery into the battery charging slot, and ensure that it is
completely inserted into the slot.
R You can confirm the charging status by observing the indicator.
R Up to four batteries can be charged at the same time.
R The battery may become warm during charging. This is normal.
11
Troubleshooting
f you experience any trouble while using this product, refer to the following
I
information for basic troubleshooting. If the trouble persists, contact your technical
support representative.
Charging does not
ccur at all/
o
The indicator does not
light.
The indicator flashes in
ed.
r
The indicator flashes in
range.
o
Charging ends quickly
r does not occur at all.
o
R The battery is not properly inserted. Make sure it
is inserted properly (page 11).
R The AC adaptor is not connected to the power
outlet. Connect it.
R The battery charging terminals are dirty. Clean
the terminals.
R The battery may be worn out. Replace the battery
with a new one.
R The battery charging terminals are dirty. Clean
the terminals.
R Charging did not end properly or too much
voltage was detected. Remove and reinsert the
battery or the AC adaptor plug.
R Battery authentication failed because an
unsupported battery was installed. Use only
specified batteries.
R The battery may be worn out. Replace the battery
with a new one.
R The ambient temperature is too low or too high.
Place this product in the specified charging
environment.
R The battery may be worn out. Replace the battery
with a new one.
12
Specifications
Power supply input 15.6 V DC, 5 A
Battery charging 4.35 V DC, 3 A
Battery charging time Approx. 3 hours (25 °C [77 °F] environment)
Dimensions
Weight Approx. 0.7 kg (1.6 lb)
Charging environment 10 °C to 35 °C (50 °F to 95 °F)
Operating environment 0 °C to 40 °C (32 °F to 104 °F)
AC adaptor
*1 <Only for North America> The AC adaptor is designed for use with power
s
ources that supply up to 240 V AC. The AC cord supplied with the AC
adaptor is designed for use with power sources that supply up to 125 V AC.
Approx. 373 mm ´
(14.7 in. ´ 5.7 in. ´ 2.0 in.)
0 % to 80 % relative humidity
3
CF-AA5713A
146 mm ´ 51 mm
*
1
13
Für Europa
Konformitätserklärung
„Hiermit erklärt Panasonic, dass dieses Ladegerät für 4 Akkus die wichtigsten Auflagen und andere relevante Bestimmungen der zutreffenden
EU-Direktiven erfüllt.“
Autorisierter Vertreter:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Deutschland
Entsorgung von Altgeräten
Nur für die Europäische Union und Länder mit Recyclingsystemen
Dieses Symbol, auf den Produkten, der Verpackung und/oder den Begleitdokumenten, bedeutet, dass gebrauchte elektrische und elektronische Produkte nicht in den allgemeinen Hausmüll gegeben werden dürfen.
Bitte führen Sie alte Produkte zur Behandlung, Aufarbeitung bzw. zum Recycling gemäß den gesetzlichen Bestimmungen den zuständigen Sammelpunkten zu.
Indem Sie diese Produkte ordnungsgemäß entsorgen, helfen Sie dabei,
wertvolle Ressourcen zu schützen und eventuelle negative Auswirkungen
auf die menschliche Gesundheit und die Umwelt zu vermeiden. Für mehr
Informationen zu Sammlung und Recycling, wenden Sie sich bitte an Ihren
örtlichen Abfallentsorgungsdienstleister.
Gemäß Landesvorschriften können wegen nicht ordnungsgemäßer Entsorgung dieses Abfalls Strafgelder verhängt werden.
Energiesparen
Informationen zum Stromverbrauch gemäß Verordnung (EG) Nr. 1275/2008 der
Kommission entnehmen Sie bitte der folgenden Webseite:
http://www.ptc.panasonic.eu/
14
Inhalt
Einführung Seite 15
Sicherheitshinweise Seite 16
Vorsichtshinweise zum Gebrauch Seite 18
Teilebezeichnung Seite 19
Laden des Akkus Seite 20
Fehlerbehebung Seite 21
Technische Daten Seite 22
Einführung
Dieses Produkt ist zur Verwendung mit den Panasonic-Serien FZ-X1 und FZ-E1 vorgesehen
(nachstehend als „das Gerät“ bezeichnet).
Bis zu vier Akkus können gleichzeitig geladen werden.
Kompatible Akkus (im Lieferumfang des Geräts und als Zubehör erhältlich)
R FZ-VZSUX100J
Zubehör im Lieferumfang
R Netzteil (Modellnummer CF-AA5713A) x 1
R Netzkabel x 1
R Bedienungsanleitung (dieses Dokument) x 1
Hinweis:
R Einige Abbildungen wurden zum besseren Verständnis vereinfacht und können vom
tatsächlichen Produkt abweichen.
15
Loading...