Panasonic EX-11A-R User Manual
Ten Times Greater Inflection Resistance
Long Sensing Range: 1m (EX-19□-R)
ULTRA-SLIM TYPE PHOTOELECTRIC SENSOR
EX-10 -R SERIES
Conforming to
EMC Directive
UL Recognition
EX-10-R series has ten times greater inflection resistance. It is most
suitable for moving parts, such as robot arm, etc.
Smallest Body, Just 3.5mm Thick
A sensing range of 1m has been realised with a slim size of just
3.5mm. It can be used to detect even wide IC trays.
Flexible Mounting
The diffuse reflective type sensor is front sensing and is so thin that it
gives an impression of being just pasted on the mounting base. The
thru-beam type sensor is available as front sensing type, as well as,
side sensing type, allowing flexible mounting.
Thru-beam
Front sensing type
Diffuse reflective
Front sensing type
Side sensing type
Suitable for moving parts!
Inflection resistant cable type is now available
Actual size
It can be mounted in a very small space
as its size is just W10H14.5D3.5mm
(thru-beam, front sensing type).
Inflection resistant cable type
1m
10mm
3.5mm
14.5mm
Receiver
Note: Please refer to EX-10 series catalog or sensor general catalog for more details specifications and options.
Item
Sensing range
Min. sensing object
Hysteresis
Supply voltage
Output
Response time
Protection
IP67 (IEC)
Accessories
Convergent reflective
Thru-beam
EX-11A-R
EX-13A-R
EX-19A-R
EX-14A-R
EX-11B-R
EX-11EA-R
EX-11EB-R
EX-13B-R
EX-13EA-R
EX-13EB-R
EX-19B-R
EX-14B-R
150mm
500mm
1m
2 to 25mm (Note 2)
(Conv. point: 10mm)
15% or less of operation
distance
"0.1mm copper wire
(Setting distance: 10mm)
"2mm opaque object
(
Setting distance between
emitter and receiver: 1m
)
12 to 24V DC10% Ripple P-P10% or less
0.5ms or less
Mounting screws: 2 sets
Mounting screws: 1 set
Front sensing
Light-ON
Dark-ON
Side sensing Front sensing Side sensing Front sensing Side sensing
Type
Model
No.
"1mm opaque object
(Setting distance between emitter and receiver: 150mm)
"2mm opaque object
(Setting distance between emitter and receiver: 500mm)
SPECIFICATIONS
I/O CIRCUIT DIAGRAM
Emitter
Emitter
PRECAUTIONS FOR PROPER USE
!
This product is not a safety sensor. Its use is not
intended or designed to protect life and prevent
body injury or property damage from dangerous
parts of machinery. It is a normal object detection
sensor.
DIMENSIONS (Unit: mm)
2.1
3.5
2-"2.2
mounting holes
Beam-emitting part
11
1.75
4.5
14.5
5.5
10
"2.5 cable 2m long
1.75
6.5
4
4
5.5
10
6.45
1.75
Beam-receiving part
2-"2.2 mounting holes
"2.5 cable 2m long
11
1.75
4.5
14.5
1.5
6.5
Stability indicator (Green)
Operation indicator (Red)
2-"2.2 mounting holes
"
2.5 cable 2m long
Beamemitting part
11
1.75
4.5
14.5
10
1.75
6.5
4
4.5
4.2
2.25
Operation indicator
(Red)
1.75
5
2.75
6.45
13
3.5
4.5
Beam-emitting part
Beam-receiving part
Stability indicator
(Green)
2-"2.2 mounting holes
"2.5 cable 2m long
4.5
14.5
11
1.5
1.75
2.1
8
Thru-beam
front sensing type
Thru-beam
side sensing type
Diffuse reflective type
Receiver
2.1
3.5
2-"2.2
mounting holes
"2.5 cable 2m long
Beamreceiving part
Stability indicator
(Green)
Operation indicator
(Red)
4
10
6.45
1.75
11
1.75
4.5
14.5
1.5
6.5
4.5
2.25
4.2
Note: The emitter of the thru-beam type sensor does not incorporate the output.
Symbols … D : Reverse supply polarity protection diode
ZD: Surge absorption zener diode
Tr : NPN output transistor
Color code
Users' circuitInternal circuit
50mA max.
Tr
D
ZD
(Blue) 0V
12 to 24V DC
10%
Sensor circuit
(Brown) V
(Black) Output (Note)
Load
NPN open-collector transistor
Maximum sink current: 50mA
Applied voltage: 30V DC or less (between output and 0V)
Residual voltage: 1V or less (at 50mA sink current)
0.4V or less (at 16mA sink current)
No. LCE-EX10R-PDF July, 2001
2431-1 Ushiyama-cho, Kasugai-shi, Aichi,
486-0901, Japan
Phone: +81-(0)568-33-7211
FAX: +81-(0)568-33-2631
SUNX Limited
Phone: +81-(0)568-33-7861
FAX: +81-(0)568-33-8591
Overseas Sales Dept.
http://www.sunx.co.jp/
All information is subject to change without prior notice.
Loading...