Panasonic EX-11A User Manual
http://www.sunx.co.jp/
ULTRA-COMPACT
PHOTOELECTRIC SENSOR
For questions about cautions, dimensions, etc.
Amplifier Built-in in this size!
1
/
13
1
/
13
Volume ratio Volume ratioVolume ratio
EX-10 seriesEX-10 series
CX-400 series
Standard photoelectric sensor
CX-400 series
Standard photoelectric sensor
EX-20 series EX-30 seriesEX-20 series EX-30 series
Industry’s
slimmest!
Industry’s
slimmest!
Mountable with
M3 screws
!
Single-point
tightening!
Mountable with
M3 screws
!
Single-point
tightening!
*
1 Comparison with CX-400
*
2 As of November 2005 and based
on research conducted by SUNX.
*
1
*2
approx.
approx.
1
/
5
1
/
5
approx.
approx.
1
/
6
1
/
6
approx.
approx.
*
1
*
1
PHOTOELECTRIC SENSOR
Amplifier Built-in
EX SERIES
Lineup
Conforming to
EMC Directive
UL Recognition
Long-range sensing is
possible, even with an
ultra-slim body that is
3.5 mm 0.138 in thin.
Long-range sensing even with compact size
EX-19
1
EX-10SERIES
For questions about cautions, dimensions, etc.
SUNX website: http://www.sunx.co.jp/
Industry’s slimmest! *
*
As of November 2005 and based
on research conducted by SUNX.
10 mm
0.394 in
3.5 mm 0.138 in
thick
Smallest body,
just 3.5 mm 0.138 in thick
It can be mounted in a very small space as its size is just
W10H14.5D3.5 mm W0.394H0.571D0.138 in (thru-beam,
front sensing type).
14.5 mm
0.571 in
A convenient 2-color indicator has
been incorporated in the miniature
body.
Bright 2-color indicator
A flexible cable type with greatly improved bending durability
compared to previous types is available. It is ideal for moving parts
such as robot arms.
Increased bending durability
EX--R
The sensor is suitable for
detecting small and highspeed traveling objects.
High-speed response time: 0.5 ms
Thru-beam type sensor incorporated with an operation mode switch
on the bifurcation is also available. It helps you to test the operability
before start-up.
Operation mode switch
EX-15/17
EX-19B
1,000 mm
39.370 in
max.
2-color indicator
Red: Operation indicator
Green: Stability indicator
Conforming to EMC Directive
(Excluding EX-15/17)
UL Recognition
(Excluding 5 m cable length type)
Ultra-slim Photoelectric Sensor
Amplifier Built-in
2
The EX-20 series achieves long
distance sensing [thru-beam
type: 2 m 6.562 ft, retroreflective
type: 200 mm 7.874 in (when
using the attached reflector),
diffuse reflective type: 160 mm
6.299 in], despite its miniature
size.
Hence, it is usable even on a
wide conveyor.
Long sensing range
EX-20SERIES
It can be tightened
with M3 screws.
Metal sleeve inserts have been provided in the mounting holes so
that the product is not damaged even in case of excess tightening.
A red LED dot light source is used to cast
a red spot beam so that the sensing
position can be checked easily.
Spots can be seen clearly
The beam-receiving photodiode
and the A/D conversion circuit
have been fabricated on a
single chip optical IC (full
custom). Hence, in spite of its
miniature size, it has a
performance and reliability
which is equal to or better than
the conventional product.
Miniaturization by using single chip optical IC
8.2 mm
0.323 in
10.5 mm
0.413 in
19 mm
0.748 in
M3 screws
Sensitivity
adjuster
EX-23
Out of position
2,000 mm
78.740 in
max.
Miniatur-
zation
High-
luminance
spot
EX-26
EX-28
UL Recognition
(Excluding 5 m cable length type)
For questions about cautions, dimensions, etc.
SUNX website: http://www.sunx.co.jp/
Conforming to
EMC Directive
Amplifier Built-in
Ultra-compact Photoelectric Sensor
Mountable with M3 screws &
Incorporates a sensitivity
adjuster even in this size
Setting distance:
10 mm 0.394 in
Setting
distance:
80 mm
3.150 in
5 mm
0.197 in
spot
spot
"
"
1 mm
0.039 in
"
"
Loading...