Panasonic EUR646494 User Manual
Panasonic
How to use the remote
control transmitter
EUR646494
This remote control can be used to operate the receiver you
purchased and some other Panasonic and Technics compact
cassette decks, CD changers (and CD players), TVs, VCRs and
DVD players, provided they are equipped with a remote control
sensor.
It is also possible to change the remote control code so that the
remote control transmitter can operate TVs and VCRs which have
not been manufactured by this company.
Preparations
• For an explanation on how to set up your remote control and
precautions, see “Concerning the remote control” in the
operating instructions that came with your receiver.
* For details on operating other equipment, see the instruction
manual provided with the specific unit.
HE
RQT4778-P
Point the remote control
toward the receiver
Basic operations
To turn the unit ON/OFF
TUNER/ Once the unit has been set to ON, it can
be turned ON and OFF simply by pressing
O [6].
fynFi
After turning the TV, VCR or DVD player ON or OFF, always
press TUNER/BAND before pressing [ cb ]when turning the
receiver ON and OFF.
HOMETHEAIEH
6
TV VCR
oo
► TAPE CD BAND
TUNEFV
oooo
O CD O
TRIE DVD
o O o
oQd
DISPLAY f
--------
^ MENU
o O o
STJ
STEREO SURRO^D SFC TEST
OOOO
DELAY LEVEL - +
1
d
0 DISC ENTER
OOOO
сЬсЬсЬП
бсЬбсЬ
V сн л TV/VIOEO “^“13
OOOO
MUTING - VOL +
ooo
To select an input
source and switch the
remote control
transmitter to each
operation mode
To turn off the Dolby
Pro Logic and SFC
modes
To turn on the Dolby
Pro Logic and
SURROUND mode
To turn SFC on and
select the mode
To output a test signal
TAPE VCR TV DVD CD BAND
OOOO oO
PHONO can not be selected with this remote control.
STEREO
O
SURROUND EEI3
^ ^ 3 STEREO can not be selected with this
remote control.
Changes as follows each time the button is
pressed.
SFC
(— ) HALL - CLUB - LIVE - THEATER
1 1
1
-----
SIM SURR (SIMULATED)
When the SURROUND or 3 STEREO mode is ON
TEST
^ Press once more to stop the signal.
When the SURROUND, 3 STEREO or SFC modes are on.
TUNER/
-------
------
>
RQT4778
To adjust the output
level of the center
speaker and/or
surround speakers
To adjust the delay
time
To mute the sound
level
To adjust the volume
level
_+
(i)
^ ^ ^ ^
CD
Adjust output level.
• When the SURROUND mode is ON and the center mode is on
PHANTOM, you cannot select the center channel.
• When SFC is used, the center mode can be changed only if
THEATER is on.
• When the 3 STEREO mode is ON, you cannot select the
surround channel.
When the SURROUND or SFC modes are on.
DEUY - +
O ^ OO
The message “MUTING ON NOW” runs
MUTING repeatedly from right to left across the display
C ) as long as the muting function is on.
Press once more to return to the original
volume.
- VOL +
OO
Select center (C) or surround (S).
Make sure the remote control is in the tuner operation mode. Page 2.)
Point the remote control
toward the receiver
^__^1
► TAPE CO BAND
TUNER/
oooo
O CZD O
TITLE . DVD
o O o
oOd
DISPLAY
О
D
o s
S5
DEUY LEVEL - +
OOOO
- ft o WFSCnOfe
I I o BSCfliTBl
OOOO
4 5 6 >m/EHTER
oooo
V CH A TV/VIDEO
OOOO
To listen to radio broadcasts
To select “FM” or “AM”
To select the desired
channel sequentially
(Preset tuning)
To select the desired
channel directly
(Preset tuning)
To select radio
stations by frequency
(Direct tuning)
C) FM^AM
V CH A
oo
12 3 1
OOO о
_4 5 6 >Ш!ЕЩЕР
Change as follows each time the button is pressed.
(Example: Channel 1)
(} (Example: Channel 10)
within 10 seconds
(Example: 107.9MHz)
ооф
¿) (D) CZ) within 10 seconds
To operate a cassette deck
Turn the cassette deck ON before trying to operate it by remote control.
Make sure the remote control is in the cassette deck operation mode. Page 2.)
It may not be possible to operate some cassette decks with this unit.
Point the remote control
toward the cassette deck
------
^ ^ TUNER/
► TAPE CD BAND
ooo
Only when using a double
cassette deck
To select the tape deck
(DECK 1/DECK 2)
To start playback
O
O
О О) о
О П О
ODD
DISPLAY /
-------------
s MENU
О О О
S^TEB^aiaaOtM^SFC^ ^TEST^
DELAY LEVEL - +
1 C 0 QtSCE>fTER
To fast-forward or
rewind the tape
While the tape is stopped
o o
With TPS-equipped cassette decks, you can move to the
beginning or end of a track by pressing these buttons while the
tape is playing.
OOOO
DDDH
бсЬбб
V CH A TV/VIDEO
OOOO
To stop playback
■
( )
ПОТ477в
Loading...