S P E C F I L E
Projector Mount Bracket
ET-PKV400B
Description
This Projector Mount Bracket is used when mounting a Panasonic projector to ceilings.
NOTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional ET-PKL100H/PKL100S ceiling mount bracket.
Specifications |
|
|
|
Dimensions (W × H × D): |
312.5 × 62 × 248.5 mm (12-5/16˝ × 2-7/16˝ × 9-25/32˝ ) |
||
Weight: |
|
Approx. 0.96 kg* (2.1 lbs*) |
|
Applicable ceiling mount bracket: ET-PKL100H/PKL100S |
|
||
Applicable projector: |
PT-VZ575N/VZ570/VW535N/VW530/VX605N/VX600 |
||
|
|
PT-VX600D/VX605ND/VW530D/VW535ND/VZ570D/VZ575ND |
|
|
|
PT-VX600T/VX605NT/VW530T/VW535NT/VZ570T/VZ575NT |
|
|
|
PT-VX60 |
|
* Average value. May differ depending on models. |
|
||
Weights and dimensions shown are approximate. Specifications subject to change without notice. |
|||
Parts |
Projector mount bracket. . . . . . . . . . . . . . . . . . . . . . |
1 |
|
|
Screw,captive washer (M4 × 10) . . . . . . . . . . . . . . . . |
4 |
|
|
Projector drop-prevention kit. . . . . . . . . . . . . . . . . . |
1 |
C a u t i o n :
•Mounting should be done by a qualified technician.
•Make sure that the mounting (ceiling) area has sufficient strength.
•Read the enclosed installation instructions thoroughly before starting.
•Do not use an electric screwdriver or impact screwdriver to tighten screws.
Use a torque screwdriver and tighten screws to the torque specified in the instructions.
•When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
Dimensions
248.5 (9-25/32)
62 (2-7/16)
312.5
(12-5/16)
unit : mm (inch) NOTE: This illustration is not drawn to scale.
As of August 2014 |
1 / 1 |
|
|
|
|
SFL14A011