Panasonic ET-PKV100H User Manual
S PEC F ILE
Ceiling mount bracket for high ceilings
ET-PKV100H
Description
This ceiling mount bracket is used when mounting a Panasonic’s applicable projector to high ceilings.
NOTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional bracket assembly.
Specifications
Vertical correction angle: ±15°
Horizontal slant correction angle: ±15°
Horizontal turn correction angle: 360°
Dimensions (W × H × D): 180 × 835– 1,405 × 226 mm
(7-3/32 × 32-7/8 – 55-5/16 × 8-29/32 inches)
Weight: Approx. 4.1 kg* (9.0 lbs*)
Applicable bracket assembly: ET-PKV200B/PKV100B/PKV101B/PKL300B/PKL100B/PKT100B/
Parts
PKC200B/PKC100B
Projector mount bracket A (pole included) . . . . . 1
Projector mount bracket B (pole included) . . . . . 1
Pole joint bolt with collar . . . . . . . . . . . . . . . . . . . . 1
Washer (M6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Hexagonal nut (M6) . . . . . . . . . . . . . . . . . . . . . . 1
Snap pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Screws (M5 × 10) . . . . . . . . . . . . . . . . . . . . . . . . 4
Hexagonal wrench . . . . . . . . . . . . . . . . . . . . . . . 1
Average value. May differ depending on products.
*
Caution:
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed mounting instructions thoroughly before starting.
• Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque
wrench and tighten screws to the torque specified in the instructions.
• When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
Dimensions
195
(7-11/16)
85
(3-11/32)
184
(7-1/4)
Projector
×
9
(11/32
×
1/2)
ø9 (ø11/32)
ø38
(1-1/2)
921–1,491
Adjustable in
(36 -1/4–58-11/16)
30 mm (1-3/16) steps
143
(5-5/8)
13
162
(6-3/8)
× 13
10
× 1/2)
(13/32
70
(2-3/4)
70
(2-3/4)
ø10 (ø13/3 2)
140
(5-1/2)
The illustration shows the ceiling mount bracket
when it is combined with the ET-PKV200B and the
PT-VW431D/VW435N/VW440/VW430/VX505N/VX510/
VX500 is attached.
As of October 2013
SFL11A022-11
100
(3-15/16)
(7-7/8)
(3-15/16)
200
100
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
1/10
S PEC F ILE
Ceiling mount bracket for high ceilings
Dimensions
63
(2 -15/32)
176
(6 -15/16)
176
(6 -15/16)
Projector
153.9*
(6-1/16)
ø38
(1-1/2)
125.5
(4 -15/16)
ET-PKV100H
840–1,410
Adjustable in
(33-1/16–55-1/2)
30 mm (1-3/16) steps
129.5 (5-3/32) with the PT-VX42Z.
*
× 13
10
1/2)
(13/32
×
×
9
×
(11/32
The illustration shows the ceiling mount bracket
when it is combined with the ET-PKV101B and the
PT-VW345NZ/VW340Z/VX415NZ/VX410Z/VX42Z is attached.
1/2)
13
100
(3-15/16)
100
(3-15/16)
200
(7-7/8)
70
(2-3/4)
140
(5-1/2)
70
(2-3/4)
ø10 (ø13/32)ø9 (ø11/32)
NOTE: This illustration is not drawn to scale.
unit : mm (inch)
SFL11A022-11
2/10As of October 2013
S PEC F ILE
Ceiling mount bracket for high ceilings
Dimensions
38
(1-1/2)
109
(4-9/32)
179
(7-1/16)
Projector
113*
(4-14/32)
ø38
(1-1/2)
118
(4-21/32)
ET-PKV100H
908-1478
Adjustable in
(35-3/4–58-3/16)
30 mm (1-3/16) steps
* 112 (4-13/32) with the PT-LX351/LX321/LX271.
10 × 13
(13/32
× 1/2)
(11/32
ø9 (ø11/32)
The illustration shows the ceiling mount bracket
when it is combined with the ET-PKL300B and
the PT-LW321/LW271/LX351/LX321/LX271 is attached.
× 13
9
× 1/2)
100
(3-15/16)
(3-15/16)
200
(7-7/8)
100
70
(2-3/4)
140
70
ø10 (ø13/32)
NOTE: This illustration is not drawn to scale.
(5-1/2)
(2-3/4)
unit : mm (inch)
As of October 2013
SFL11A022-11
3/10
Loading...