Panasonic ET-PKR100S User Manual

S P E C F I L E

Ceiling mount bracket for low ceilings

ET-PKR100S

Description

This ceiling mount bracket is to be used when mounting projectors to low ceilings.

Specifications
Vertical correction angle:	+5°, -17°
Horizontal slant correction angle:	±5°
Horizontal turn correction angle:	±1.2°
Dimensions (W × H × D):	358 × 124 × 303 mm (14-3/32 × 4-3/4 × 11-15/16 inches)
Weight:	4.5 kg* (9.9 lbs)*
Applicable projectors:	PT-RZ470K/RZ470W/RW430K/RW430W/RZ370/RW330

* Average value. May differ depending on the actual unit. Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.

Parts	Attachment plate . . . . . . . . . . . . . . . . . . . . . . . .	1
	Projector mount bracket . . . . . . . . . . . . . . . . . . .	1
	Angle adjusting bracket . . . . . . . . . . . . . . . . . . .	1

Washer-fitted screws (M4 × 10) . . . . . . . . . . . . . 4 Washer-fitted hexagonal bolts (M6 × 16) . . . . . 10 Drop prevention kit . . . . . . . . . . . . . . . . . . . . . . . 1

C a u t i o n :

•Mounting should be done by a qualified technician.

•Make sure that the mounting (ceiling) area has sufficient strength.

•Read the enclosed installation instructions thoroughly before starting.

•Do not use an electric screwdriver or impact driver to tighten screws. (Use a torque driver or similar tool.)

•When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.

Dimensions

Illustration shows the bracket attached to a projector.				Attachment plate
		3/4)-(4		220 (8-21/32)
Attachment	124		187.5	3/8)-(7
plate

				11
				( 7/16)
201	214	3/16)-(6	25/32)	350(13-25/32)	314(12-3/8)
(7-29/32)	157
	(8-7/16)
Projector
			-		2-3-R6
			(13
					(2-3-R1/4)
			350
					175 (6-7/8)
87.5
(3-7/16)
220					unit : mm (inch)
(8-21/32)					NOTE: This illustration is not drawn to scale.

As of December 2012

1 / 1

SFD12A015-1