Panasonic ET-PKD130B User Manual

S P E C F ILE

Bracket assembly

Description

This bracket assembly is used when mounting a Panasonic projector to ceilings.

NOTE: This ceil ing mount bracket cannot b e used b y itself . Combi ne it w ith the optional ceiling mount bracket.

Specifications

Dimensions (W × H × D): 378 × 56 × 400 mm (14-7/8 × 2-7/32 × 15-3/4 inches)

Weight: Approx. 3.0 kg* (6.61 lbs*)

Applicable ceiling mount bracket ET-PKD130H/PKD120H/PKD120S/PKD310H/PKD310S/PKD56H/PKD55S
TY-PKD55S

Applicable projector:

Parts

Projector mount bracket (bracket assembly) . . . . 1

Washer-fitted screws (M6 × 16) . . . . . . . . . . . . . . 6

Wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

PT-DZ870K/DZ870W/DZ870LK/DZ870LW/

DW830K/DW830W/DW830LK/DW830LW/DX100K/DX100W/DX100LK/DX100LW
DZ770S/DZ770K/DZ770LS/DZ770LK/
DW740S/DW740K/DW740LS/DW740LK/DX810S/DX810K/DX810LS/DX810LK/
DZ680S/DZ680K/DZ680LS/DZ680LK/
DW640S/DW640K/DW640LS/DW640LK/DX610S/DX610K/DX610LS/DX610LK/
DZ6710/DZ6710L/
DW730S/DW730K/DW730LS/DW730LK/DX800S/DX800K/DX800LS/DX800LK/
DZ6700/DZ6700L/DW6300S/DW6300K/DW6300LS/DW6300LK/
D6000S/D6000K/D6000LS/D6000LK/D5000S/D5000LS

E T-PKD130B

* Average value. May differ depending on models.

Caution:

• Mounting should be don e by a qu alified technician.

• Make sure that the mounting (ceiling) area h as sufficient strength.

• Read the enclosed mounting instructions t horoughly before starting .

• Do not use an electric screwdri ver or i mpact driver to tighten screws. Use a torque driver or hexagon torque

wre nch and tighten screws to the torque specified in t he instructions.

• When the product is no longer going to be used, have it disposed of quickl y by a professional disposal service.

Dimensions

400 (15-3/4)

378 (14-7/8)

Weights and dimensions shown are approximate. Specifications subject to change without notice.

As of September 2013

SFL13A001

56

(2-7/32)

NOTE: This illustration is not drawn
to scale.

unit : mm (inch)

1/1