Panasonic ET-PKD120S User Manual
S PEC F ILE
Ceiling mount bracket for low ceilings
ET-PKD120S
Description
This ceiling mount bracket is to be used when mounting projectors to low ceilings.
NOTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional bracket assembly.
Specifications
Vertical correction angle: +5°, -5°
Horizontal slant correction angle: ±5°
Horizontal turn correction angle: ±1.2°
Dimensions (W × H × D): 258 × 80 × 286 mm (10-5/32× 3-5/32 × 11-1/4 inches)
Weight:
Applicable bracket assembly:
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Parts etalp tnemhcattA . . . . . . . . . . . . . . . . . . . . . . . . 1
3 kg* (6.6 lbs)*
ET-PKD120B/PKD120B/PKE300B
* Average value. May differ depending on models.
)61 × 6M(screws dettif-rehsaW . . . . . . . . . . . . . 10
tekcarb tnuom rotcejorP . . . . . . . . . . . . . . . . . . . 1
Caution:
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed mounting instructions thoroughly before starting.
• Do not use an electric screwdriver or impact driver to tighten screws. (Use a torque driver or similar tool.)
• When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
Dimensions
Illustration shows the bracket (ET-PKD130B attached to PT-DZ870/DZ870L/DW830/DW830L/DX100/DX100L.
Attachment plate
Attachment
plate
239 274
(9-13/32) (10-25/32)
109
(4-9/32)
220.5
Projector
109109
(4-9/32)(4-9/32)
(8-11/16)
(9)
254
(7/8)
Φ11
(Φ7/16)
2-3-R6
(2-3-R1/4)
215 (8-15/32)22.5
260 (10-1/4)
Φ100
(Φ3-15/16)
(23/32)
254 (9)
218 (8-19/32) 18
As of June 2014
SFD13A003-3
107.5
(10-1/4)
260
107.5
(4-7/32)(4-7/32)
Attachment
plate
NOTE: This illustration is not drawn to scale.
unit : mm (inch)
1/2
S PEC F ILE
Ceiling mount bracket for low ceilings
ET-PKD120S
Dimensions
Illustration shows the bracket (ET-PKE300B) attached to PT-EZ770Z/EZ770ZL/EW730Z/EW730ZL/EX800Z/EX800ZL and
PT-EZ580/EZ580L/EW640/EW640L/EX610/EX610L/EW540/EW540L/EX510/EX510L.
Attachment plate
Attachment plate
185 200
(7-9/32) (7-7/8)
109
(4-9/32)
Projector
109109
(4-9/32)(4-9/32)
200
254
(7-7/8)
(7/8)
(9)
Φ11
(Φ7/16)
2-3-R6
(2-3-R1/4)
215 (8-15/32)22.5
260 (10-1/4)
Φ100
(Φ3-15/16)
(23/32)
254 (9)
218 (8-19/32) 18
107.5
(4-7/32)
(10-1/4)
107.5
(4-7/32)
260
Attachment plate
NOTE: This illustration is not drawn to scale.
unit : mm (inch)
As of June 2014
SFD13A003-3
2/2
Loading...