![](/html/11/11c9/11c99627ae3cb6b70352f5db3e0e7595cc67ffc9f436d1814154e96c4a8448ec/bg1.png)
S PEC F ILE
Ceiling mount bracket for high ceilings
ET-PKD120H
Description
This ceiling mount bracket is to be used when mounting projectors to high ceilings.
NOTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional bracket assembly.
Specifications
Vertical correction angle: +5°, -17°
Horizontal slant correction angle: ±5°
Horizontal turn correction angle: ±5°
Dimensions (W × H × D): 370 × 331– 411 × 286 mm (14-9/16 × 13-1/32–16-3/16 × 11-1/4 inches)
Weight: 7.5 kg* (16.5 lbs)*
Applicable bracket assembly:
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Parts etalp tnemhcattA . . . . . . . . . . . . . . . . . . . . . . . . 1
Pole support bracket 1 . . . . . . . . . . . . . . . . . . . . 1
ET-PKD120B
A elop retsujdA . . . . . . . . . . . . . . . . . . . . . . . . . . 1
B elop retsujdA . . . . . . . . . . . . . . . . . . . . . . . . . . 1
retsujda elgnA . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
* Average value. May differ depending on models.
Pole fixer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
gaxeh dettif-rehsaW . . . . . . 2
)08 × 6M( stlob lano
)61 × 6M( stlob dettif-rehsaW . . . . . . . . . . . . . . 30
Plain washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Hexagonal nuts (M6) . . . . . . . . . . . . . . . . . . . . . . 2
Pole support bracket 2 . . . . . . . . . . . . . . . . . . . . 1
Caution:
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed mounting instructions thoroughly before starting.
• Do not use an electric screwdriver or impact driver to tighten screws. (Use a torque driver or similar tool.)
• When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
Dimensions
Illustration shows the bracket (ET-PKD120B) attached to a projector.
Attachment
plate
244 269
(9-19/32) (10-19/32)
(3-15/16) (3-15/16)
(15-3/4)
259
100100
Φ60.5
(Φ2-3/8)
420*
–16-17/32* )
340–
451.5–531.5*
(13-3/8
(17- 25 /32–20-15/16*)
Adjustable in
*
40 mm (1-9/16˝) steps
Projector
100100
370
(14-9/16)
(3-15/16) (3-15/16)
Attachment plate
(1-5/32)
Attachment plate
Φ12
(Φ15/32)
2-3-R6
(2-3-R1/4)
20029.5
(7-7/8)
259
(10-3/16)
85
(3-11/32)
200
(7-7/8)
370
(14-9/16)
As of May 2013
SFD13A002
NOTE: This illustration is not drawn to scale.
unit : mm (inch)
1/1